Important compatibility info
Placement on Vehicle | Charge Air Cooler, Left |
Height | 145 mm |
Width | 290 mm |
Additional Information 2 | with clamps |
Inner diameter 1 | 49 mm |
Inner diameter 2 | 66 mm |
Weight | 1.368 kg |
Type | Charge Air Hose |
Hose Length | 690 mm |
Function | Charge Air Hose |
Turbocharger line | Piping to charge air cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Drive Shaft |
Placement on Vehicle | Front Axle Left |
Additional Information 2 | with nut |
External Teeth, Wheel Side | 36 |
Weight | 5.000 kg |
Min. Length | 546 mm |
Wheel Sided Joint Diameter | 89 mm |
Transmission-side joint diameter | 107.7 mm |
Type | Drive Shaft |
External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.37 kg |
Placement on Vehicle | Left, Lower, Front, Front Axle |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 106560 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | Screen Filter |
Function | Hydraulic Filter Kit, automatic transmission |
Weight | 0.630 kg |
Length | 253 mm |
Height | 80 mm |
Width | 207 mm |
Type | Hydraulic Filter Kit, automatic transmission |
Additional Information | with gasket/seal |
Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 2.956 kg |
Cone Size | 17 mm |
Paired article numbers | 175415 |
Steering arm type | Control Arm |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Left, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.8 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 64 mm |
Outer diameter | 150 mm |
Inner diameter | 70 mm |
Bearing Type | Tapered Roller Bearing |
Function | Wheel Bearing |
Type | Wheel Bearing |
Bearing Code | 32312 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 293 mm |
Thickness | 71 mm |
Brake Disc Thickness | 40 mm |
Brake Disc Type | Internally Vented |
Minimum thickness | 37 mm |
Bolt Hole Circle Diameter | 144 mm |
Centering Diameter | 124 mm |
Surface | Coated |
Weight | 12.8 kg |
Rim Hole Number | 12 -Hole |
Type | Brake Disc |
Function | Brake Disc |
Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with lock nut |
Weight | 3.295 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 39645 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Additional Information 2 | with screw, with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (39627)
- 1x Febi Nut, ball joint (21884)
- 1x Febi Screw (39229)
Important compatibility info
Screw length below head | 245 mm |
Number of Teeth | 26 |
Length | 296 mm |
Outer diameter | 98 mm |
Function | Brake Shaft, drum brake |
Type | Brake Shaft, drum brake |
Weight | 3.633 kg |
Paired article numbers | 179425 |
Placement on Vehicle | Left Front |
Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with rubber mounts, with holder |
Material | Sheet Steel |
Steering arm type | Control Arm |
Placement on Vehicle | Front Axle Right, Upper |
Paired article numbers | 43336 |
Weight | 3.73 kg |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Silicone, EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Weight | 0.43 kg |
Type | Charge Air Hose |
Function | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.295 kg |
Placement on Vehicle | Front Axle Right, Lower |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 39644 |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with screw, with bearing |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (39628)
- 1x Febi Nut, ball joint (21884)
- 1x Febi Screw (39229)
Important compatibility info
Weight | 0.52 kg |
Outer diameter | 44 mm |
Length | 180 mm |
Type | Slave Cylinder, engine brake |
Function | Slave Cylinder, engine brake |
External Thread Size | M8 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.2 kg |
Placement on Vehicle | Front Axle |
Shock Absorber Type | Oil Pressure |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 760 mm |
Min. Length | 474 mm |
Pipe Diameter | 76 mm. 63 mm |
Mounting points diameter | 20 mm |
Piston conrod diameter | 20 mm |
Function | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.841 kg |
Paired article numbers | 34223 |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Right, Lower |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with rubber mount |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (23798)
Important compatibility info
Additional Information 2 | Requires special tools for mounting |
Weight | 0.303 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 58 |
Timing Chain Size | G53RING |
Type | Chain Kit, oil pump drive |
Function | Chain Kit, oil pump drive |
Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (31115)
- 1x Febi Chain Tensioner, oil pump drive (183599)
- 1x Febi Rail, oil pump drive chain (183865)
- 1x Febi Rail, oil pump drive chain (183597)
Important compatibility info
Cone Size | 32 mm |
Pipe Diameter | 36 mm |
Placement on Vehicle | Rear Axle |
Length | 390 mm |
Rod/Strut | Coupling Rod |
Weight | 4.2 kg |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M24 x 1,5 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.03 kg |
Type | Hub, crankshaft |
Function | Hub, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 35 mm |
Outer diameter | 64.7 mm |
Inner diameter | 17 mm |
Number of Ribs | 6 |
Tightening Torque | 85 Nm |
Function | Alternator Freewheel Clutch |
Additional Information 2 | with lid |
Weight | 0.654 kg |
Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.51 kg |
Additional Information | with rubber mounts |
Placement on Vehicle | Front Axle Left |
Material | Steel |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Paired article numbers | 173552 |
Cone Size | 17 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.86 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 252 mm |
Additional Information | with counter nut |
Function | Inner Tie Rod |
Extra Description | ProKit |
Type | Inner Tie Rod |
External Thread Size | M18 x 1,5 |
Internal Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Brake Disc Thickness | 40 mm |
Thickness | 54.5 mm |
Placement on Vehicle | Front Axle |
Minimum thickness | 37 mm |
Brake Disc Type | Internally Vented |
Inner diameter | 145 mm |
Outer diameter | 310 mm |
Bolt Hole Circle Diameter | 140 mm |
Centering Diameter | 114 mm |
Surface | Coated |
Weight | 13.650 kg |
Rim Hole Number | 6 -Hole |
Type | Brake Disc |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 245 mm |
Outer diameter | 165 mm |
Number of Coils | 5 |
Function | Suspension Spring |
Placement on Vehicle | Rear Axle |
Weight | 4.67 kg |
Wire Diameter | 20 mm |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size 2 | 21 mm |
Paired article numbers | 41366 |
Material | Sheet Steel |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Weight | 3.6 kg |
Placement on Vehicle | Front Axle Right |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
External Thread Size | M14 x 1,5 |
Cone Size | 18 mm |
Additional Information | with rubber mounts, with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Sheet Steel |
Placement on Vehicle | Front Axle Left, Lower |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Paired article numbers | 34224 |
Weight | 3.841 kg |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (23797)
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Left |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 179491 |
Weight | 1.462 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with rubber mounts |
Placement on Vehicle | Front Axle Right |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | 173551 |
Cone Size | 17 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Weight | 4.51 kg |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Function | V-Ribbed Belt Set |
Length | 1205 mm |
Width of castor bearing surface | 25 mm |
Number of Ribs | 6 |
Weight | 0.723 kg |
Type | V-Ribbed Belt Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (177984)
- 1x Febi Belt Tensioner, v-ribbed belt (180107)
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Right |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 179489 |
Weight | 1.462 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.106 kg |
Type | Release Fork, clutch |
Function | Release Fork, clutch |
for OE number | 74 21 362 933 S2 |
Additional Information | with bush, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023