Important compatibility info
Mounting points diameter | 17.8 mm |
Stroke | 196 mm |
Placement on Vehicle | both sides |
Weight | 0.3 kg |
Eject Force | 1200 N |
Housing Diameter | 22 mm |
Length | 711 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 395.5 mm |
Piston conrod diameter | 10 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.050 kg |
Placement on Vehicle | Front Axle |
Material | Plastic |
Thickness | 125 mm |
Inner diameter | 60 mm. 70 mm |
Function | Protective Cap/Bellow, shock absorber |
Type | Protective Cap/Bellow, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Wheel Bolt |
Wheel Fastening | Ball seat A/G |
Thread Length | 24 mm |
Surface | Chromed |
Spanner Size | 17, 19 |
Length | 49 mm |
Placement on Vehicle | Front Axle, Rear Axle |
Screw length below head | 25 mm |
Outer diameter | 23.9 mm |
Material | Steel |
Quality/ Grade | 8.8 |
Weight | 0.45 kg |
External Thread Size | M12 x 1,5 |
Type | Wheel Bolt |
Lockable | Lockable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.6 kg |
Function | Expansion Tank, coolant |
Additional Information | with coolant level sensor |
Material | Plastic |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
for OE number | 8D0 121 403 L |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.918 kg |
Placement on Vehicle | Right |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | 1K0 199 262 AM |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.112 kg |
Number of Connectors / Ports | 14 |
Combi Switch Function | with cruise control, with indicator function, with high beam function |
Type | Steering Column Switch |
Function | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 21455 |
Placement on Vehicle | Lower Front Axle, Right Rear |
Weight | 1.640 kg |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Cone Size 2 | 20 mm |
External Thread Size | M14 x 1,5 |
Additional Information 2 | with ball joint, with bearing |
Additional Information | with lock nut |
Cone Size | 15 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (02682)
Important compatibility info
Weight | 0.57 kg |
Additional Information 2 | with fastening material |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Tie Rod End |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Screw (21479)
- 1x Febi Tie Rod End (22044)
- 1x Febi Screw (21478)
- 1x Febi Nut (22263)
Important compatibility info
Placement on Vehicle | Right Rear |
Length | 1152 mm |
Paired article numbers | 109233 |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Weight | 0.340 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.63 kg |
Placement on Vehicle | Rear Axle |
Width | 42 mm |
Outer diameter | 172 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 3.5 mm |
Type | Brake Shoe Set, parking brake |
Function | Brake Shoe Set, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.850 kg |
Placement on Vehicle | Right Rear |
Length | 2332 mm |
Paired article numbers | 171090 |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size | 28.6 mm |
Weight | 10.300 kg |
Length | 900 mm |
Placement on Vehicle | Front Axle |
Rod/Strut | Push Rod |
Adjustable | Adjustable on one side |
Type | Centre Rod Assembly |
Pipe Diameter | 50 mm |
External Thread Size | M20 x 1,5 |
Extra Description | ProKit |
Function | Centre Rod Assembly |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.774 kg |
Inner length 1 | 648 mm |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Outer length 1 | 970 mm |
Inner length 2 | 530 mm |
Driver Position | for right-hand drive vehicles |
Outer length 2 | 850 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.397 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 142 |
Type | Timing Chain |
Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 27 mm |
Weight | 0.062 kg |
Material | Metal |
Outer diameter | 28.5 mm |
Inner diameter | 10 mm |
Function | Deflection Pulley/Guide Pulley, timing belt |
Additional Information 2 | with screw |
Type | Deflection Pulley/Guide Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.768 kg |
Placement on Vehicle | Front |
Function | Repair Kit, driver cab suspension |
Type | Repair Kit, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bush, driver cab suspension (09219)
- 2x Febi Joint Bearing, driver cab suspension (01820)
- 2x Febi Spacer, driver cab stabiliser (09460)
- 2x Febi Spacer, driver cab stabiliser (09461)
- 2x Febi Screw (16287)
- 4x Febi Seal Ring (16288)
- 2x Febi Washer (02350)
Important compatibility info
External Thread Size | M20 x 1,5 |
Driver Position | for right-hand drive vehicles |
Length | 861 mm |
Cone Size | 28.6 mm |
Function | Centre Rod Assembly |
Pipe Diameter | 52 mm |
Rod/Strut | Push Rod |
Outer diameter | 52 mm |
Weight | 9.1 kg |
Extra Description | ProKit |
Internal Thread Size | M30 x 1,5 |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 171634 |
Weight | 3.504 kg |
Placement on Vehicle | Front Axle Left |
Material | Sheet Steel |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 7.000 kg |
Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
External Thread Size | M24 x 1,5 |
Placement on Vehicle | Front Axle |
Length | 710 mm |
Cone Size | 30 mm |
Pipe Diameter | 40 mm |
Type | Tie Rod |
Function | Tie Rod |
Extra Description | ProKit |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.115 kg |
Placement on Vehicle | Front Axle Right |
Paired article numbers | 172061 |
Resistance | 1800 Ohm |
Cable Length | 1346 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information | with bush |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 153 mm |
Type | Belt Pulley, crankshaft |
Parameter | 5PK |
Inner diameter | 14 mm |
Number of Ribs | 4 |
Weight | 1.420 kg |
Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1420 mm |
Additional Information 2 | with tensioner element |
Number of Ribs | 8 |
Weight | 1.595 kg |
Type | V-Ribbed Belt Set |
Function | V-Ribbed Belt Set |
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Track rollers material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (29124)
- 1x Febi Belt Tensioner, v-ribbed belt (21027)
Important compatibility info
Type | Drive Shaft |
Function | Drive Shaft |
Weight | 10.596 kg |
External Teeth, Wheel Side | 31 |
Paired article numbers | 182815 |
Placement on Vehicle | Front Axle Right |
Additional Information 2 | with nut |
Thread Size | M24 x 1,5 |
Transmission-side joint diameter | 88.9 mm |
Wheel Sided Joint Diameter | 98 mm |
External Teeth, Diff.Side | 39 |
Min. Length | 1072 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.272 kg |
Placement on Vehicle | Front Axle |
Length | 110 mm |
Material | Rubber |
Outer diameter | 68 mm |
Inner diameter | 33 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Pipe, charger |
Extra Description | febi Plus |
Weight | 0.117 kg |
Type | Oil Pipe, charger |
Forward- /Backflow | Supply Line |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.035 kg |
Material | NBR (nitrile butadiene rubber) |
Function | Gasket, automatic transmission oil sump |
Type | Gasket, automatic transmission oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Oil Cooler, engine oil |
Core Width | 76 mm |
Function | Oil Cooler, engine oil |
Core Length | 149 mm |
Core Depth | 75 mm |
Additional Information | with gasket/seal |
Weight | 1.200 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.9 kg |
Placement on Vehicle | Front Axle |
Material | Rubber/Metal |
Type | Repair Kit, suspension strut support mount |
Function | Repair Kit, suspension strut support mount |
Additional Information 2 | with ball bearing |
for OE number | 48609-12420 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Type | Brake Caliper |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 185630 |
Weight | 2.575 kg |
Brake caliper piston diameter | 54 mm |
Function | Brake Caliper |
Material | Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 32.97 mm |
Inner diameter | 46 mm |
Function | Coolant Pipe |
Weight | 0.06 kg |
Outer diameter | 55 mm |
Type | Coolant Pipe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023