Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 44 23 144 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.61
Important compatibility info
| Inner diameter | 30 mm |
| Bolt Hole Circle Diameter | 98 mm |
| Bearing Type | Angular Ball Bearing |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 117 mm |
| Width | 117 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.62
Important compatibility info
| Material | Cast Iron |
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
| Piston Diameter | 25.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.63
Important compatibility info
| Placement on Vehicle | engine sided |
| for OE number | 51.01201.0417 |
| Type | Cylinder Liner |
| Function | Cylinder Liner |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.63
Important compatibility info
| Additional Information | with gasket/seal |
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.65
Important compatibility info
| Refrigerant | R 1234yf, R 134a |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 361 mm |
| Core Width | 572 mm |
| Core Depth | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.65
Important compatibility info
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| for OE number | 1806 735 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.66
Important compatibility info
| Number of Connectors / Ports | 18 |
| Function | Multi-Function Switch |
| Placement on Vehicle | Driver side |
| Combi Switch Function | Window Regulator, Door Locking, Heated wing mirror on/off |
| Type | Multi-Function Switch |
| Switch Lighting | yellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.66
Important compatibility info
| Brake Disc Thickness | 24 mm |
| Outer diameter | 320 mm |
| Thickness | 51 mm |
| Minimum thickness | 21.4 mm |
| Centering Diameter | 67 mm |
| Rotor Style | Internally Vented |
| Surface | Coated |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Bolt Hole Circle Diameter | 112 mm |
| Placement on Vehicle | Rear Axle |
| Rim Hole Number | 5 -Hole |
| Number of mounting bores | 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.67
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 300 mm |
| Thickness | 48.4 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 72 mm |
| Function | Brake Disc |
| Surface | Coated |
| Minimum thickness | 23 mm |
| Brake Disc Thickness | 25 mm |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.69
Important compatibility info
| Width | 25.4 mm |
| Number of Teeth | 141 |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Units / Pulleys | incl. deflection pulley, incl. tensioner pulley |
| Function | Timing Belt Kit |
| Belts | with trapezoidal tooth profile |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (37285)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (37275)
- 1x Febi Tensioner Pulley, timing belt (39101)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (199866)
£60.69
Important compatibility info
| Placement on Vehicle | Left, Lower, Front, Front Axle |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 106560 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.70
Important compatibility info
| Type | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Right Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.70
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.71
Important compatibility info
| Paired article numbers | 179134 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 30 mm |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.71
Important compatibility info
| Function | Stabiliser Bar, suspension |
| Length | 950 mm |
| Placement on Vehicle | Front Axle |
| Extra Description | ProKit |
| Additional Information | with rubber mounts |
| Type | Stabiliser Bar, suspension |
| Additional Information 2 | with coupling rod |
| Stabiliser Diameter | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (37073)
- 1x Febi Repair Kit, stabiliser bush (37079)
£60.72
Important compatibility info
| Type | Gear, air compressor |
| Function | Gear, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.72
Important compatibility info
| Width | 41 mm |
| Function | Belt Pulley, crankshaft |
| Parameter | 6PK |
| Number of Ribs | 5 |
| Inner diameter | 9 mm |
| Outer diameter | 143 mm |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.74
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut, with bolts/screws |
| Thread Size | M16x1,5 |
| Bolt Hole Circle Diameter | 78 mm |
| External Teeth, Wheel Side | 36 |
| Number of mounting bores | 6 |
| Min. Length | 516 mm |
| Wheel Sided Joint Diameter | 85.6 mm |
| Transmission-side joint diameter | 94 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.74
Important compatibility info
| Length | 130 mm |
| Width | 130 mm |
| Thickness | 91 mm |
| Function | Cylinder Liner, air compressor |
| Type | Cylinder Liner, air compressor |
| Additional Information | with piston rings, with piston, with piston pin, with retaining rings |
| Hole Spacing | 92 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.75
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023