Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.42 kg |
| Additional Information | with gasket/seal |
| Type | EGR Valve |
| Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Number of Holes | 3 |
| Number of Ribs | 5 |
| Function | Belt Pulley, crankshaft |
| Outer diameter | 167 mm |
| Material | Rubber/Metal |
| Parameter | 6PK |
| Weight | 2.420 kg |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Thread Size | M22x1,5 |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Left |
| Transmission-side joint diameter | 81.5 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Wheel Sided Joint Diameter | 82.0 mm |
| Min. Length | 595 mm |
| External Teeth, Diff.Side | 34 |
| External Teeth, Wheel Side | 26 |
| Weight | 5.744 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Length | 142 mm |
| Weight | 0.185 kg |
| Operating Mode | Electric |
| Number of Connectors / Ports | 3 |
| Function | Gear Shift Lever Knob |
| Type | Gear Shift Lever Knob |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Weight | 0.284 kg |
| Number of Connectors / Ports | 13 |
| Combi Switch Function | with indicator function, with hazard warning light function, with headlight flasher, with high beam function |
| Type | Steering Column Switch |
| Function | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| External Thread Size | M18 x 1,5 |
| Internal Thread Size | M28 x 1,5 RHT |
| Placement on Vehicle | Front Axle |
| Length | 875 mm |
| Rod/Strut | Push Rod |
| Cone Size | 22.2 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 36 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Weight | 4.6 kg |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Weight | 3.440 kg |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 372 mm |
| Min. Length | 326 mm |
| Pipe Diameter | 84 mm. 41 mm |
| Mounting points diameter | 14 mm |
| Function | Shock Absorber, driver cab suspension |
| Placement on Vehicle | Rear |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Pipe Diameter | 36 mm |
| Weight | 3.500 kg |
| Rod/Strut | Coupling Rod |
| Additional Information 2 | with crown nut |
| Diameter | 36 mm |
| Length | 284 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Parameter | 7 PK |
| Type | Belt Pulley, crankshaft |
| Width | 30 mm |
| Outer diameter | 163 mm |
| Inner diameter | 38 mm |
| Weight | 1.495 kg |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Cable Length | 500 mm |
| Number of circuits | 18 |
| Type | Cable Repair Kit, tailgate |
| Function | Cable Repair Kit, tailgate |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Screw length below head | 325 mm |
| Length | 731 mm |
| Function | Brake Shaft, drum brake |
| Weight | 4.487 kg |
| Type | Brake Shaft, drum brake |
| Paired article numbers | 179420 |
| Placement on Vehicle | Left Front |
| Number of Teeth | 26 |
| Outer diameter | 97 mm |
| Shape/Form | S Shape |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Length | 79 mm |
| Width | 55 mm |
| Thickness | 30 mm |
| Voltage | 28 V |
| Number of Connectors / Ports | 2 |
| Function | Alternator Regulator |
| Type | Alternator Regulator |
| Weight | 0.085 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Additional Information | with rubber mounts |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 44378 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 3.8 kg |
| Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Function | Sealing Set, air compressor |
| Weight | 0.31 kg |
| Type | Sealing Set, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Type | Belt Tensioner, v-ribbed belt |
| Operating Mode | Automatic |
| Width of castor bearing surface | 26 mm |
| Outer diameter | 70 mm |
| Material | Plastic |
| Function | Belt Tensioner, V-ribbed belt |
| Weight | 0.478 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Mounting points diameter | 14 mm. 25 mm |
| Function | Shock Absorber, driver cab suspension |
| Max. Length | 346 mm |
| Min. Length | 252 mm |
| Weight | 3.6 kg |
| Placement on Vehicle | Front |
| Pipe Diameter | 63 mm. 38 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Operating Mode | Mechanical |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 0.07 kg |
| Spanner Size | 17 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1083 mm |
| Function | Sensor, exhaust gas temperature |
| Placement on Vehicle | Catalytic Converter |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Weight | 3.780 kg |
| Placement on Vehicle | Rear Axle |
| Width | 59 mm |
| Outer diameter | 74 mm |
| Inner diameter | 30 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Weight | 6.8 kg |
| Placement on Vehicle | Front Axle |
| Length | 563 mm |
| Outer diameter | 50 mm |
| Rod/Strut | Push Rod |
| Cone Size | 28.6 mm |
| Function | Centre Rod Assembly |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 |
| External Thread Size | M20 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 515 mm |
| Housing length | 314.5 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 18 mm |
| Stroke | 157 mm |
| Eject Force | 710 N |
| Housing Diameter | 22 mm |
| Weight | 0.3 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023