Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 440 mm |
| Spanner Size | 14, 17 |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
| External Thread Size | M10 x 1 |
| Weight | 0.1 kg |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.06
Important compatibility info
| Weight | 0.086 kg |
| Width | 20 mm |
| Number of Teeth | 91 |
| Belts | with trapezoidal tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.254 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Inner diameter 1 | 17.5 mm |
| Inner diameter 2 | 29 mm |
| Outer diameter 1 | 40 mm |
| Width 1 | 14 mm |
| Outer diameter 2 | 50 mm |
| Width 2 | 14 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (08392)
- 1x Febi Shaft Seal, wheel bearing (05004)
- 1x Febi Cap, wheel bearing (04992)
- 1x Febi Tab Washer, axle nut (04991)
- 1x Febi Split Pin (05005)
£10.83
Important compatibility info
| Type | Charge Air Hose |
| Inner diameter 1 | 59 mm |
| Outer diameter 2 | 62 mm |
| Outer diameter 1 | 68 mm |
| Additional Information 2 | with clamp |
| Function | Charge Air Hose |
| Inner diameter 2 | 53 mm |
| Weight | 0.386 kg |
| Turbocharger line | Piping to charge air cooler |
| Placement on Vehicle | Charge Air Cooler, Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.39
Important compatibility info
| Weight | 0.15 kg |
| Placement on Vehicle | Rear Axle |
| Material | Rubber/Metal |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.63
Important compatibility info
| Weight | 0.500 kg |
| Placement on Vehicle | Front Axle Left |
| Length | 144 mm |
| Paired article numbers | 22909 |
| Internal Thread Size | M12 x 1,5 |
| External Thread Size | M10 x 1,25 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.83
Important compatibility info
| for OE number | 03 44 513 S1 |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Weight | 0.584 kg |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (05155)
- 1x Febi Rolling Bearing, suspension strut support mount (01874)
£24.11
Important compatibility info
| Weight | 0.87 kg |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 36507 |
| External Thread Size | M12 x 1,5 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Internal Thread Size | M16 x 1,5 |
| Type | Tie Rod End |
| Length | 208 mm |
| Spanner Size | 24 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (36118)
- 1x Febi Nut (36120)
£17.58
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Centre |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 32106 |
| Steering arm type | Control Arm |
| Weight | 0.539 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Weight | 1.790 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 32232 |
| Additional Information | with lock nut |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Left, Upper |
| Additional Information 2 | with bearing, with ball joint |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Placement on Vehicle | Upper |
| Paired article numbers | 171327 |
| Weight | 0.222 kg |
| Type | Holder, engine mounting system |
| Function | Holder, engine mounting system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.32
Important compatibility info
| Weight | 0.14 kg |
| Type | Filter, cabin air |
| Filter type | Activated Carbon Filter |
| Function | Filter, cabin air |
| Length | 210 mm |
| Height | 29 mm |
| Width | 205 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.41
Important compatibility info
| Material | Cast Aluminium |
| Number of Teeth | 28 |
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Weight | 1.229 kg |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.40
Important compatibility info
| Mounting points diameter | 18 mm |
| Weight | 0.335 kg |
| Placement on Vehicle | Left |
| Length | 533 mm |
| Paired article numbers | 24731 |
| Housing Diameter | 18 mm |
| Eject Force | 330 N |
| Stroke | 216 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Type | Gas Spring, bonnet |
| Housing length | 351.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.17
Important compatibility info
| Weight | 0.074 kg |
| Height | 104 mm |
| Outer diameter | 82 mm |
| Inner diameter | 41 mm |
| Filter type | Filter Insert |
| Function | Oil Filter |
| Type | Oil Filter |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.15
Important compatibility info
| Min. Length | 230 mm |
| Pipe Diameter | 40 mm |
| Function | Shock Absorber, driver cab suspension |
| Placement on Vehicle | Left Front, Right Front |
| Mounting points diameter | 12 mm. 18 mm |
| Weight | 2.05 kg |
| Max. Length | 264 mm |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Piston conrod diameter | 12 mm |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£94.83
Important compatibility info
| Belts | with rounded tooth profile |
| Weight | 0.86 kg |
| Function | Timing Belt Kit |
| Surface | Coated |
| Number of Teeth | 131 |
| Width | 25 mm |
| Type | Timing Belt Kit |
| for OE number | 16 06 384 SK |
| Units / Pulleys | incl. tensioner pulley, incl. deflection pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (23411)
- 1x Febi Tensioner Pulley, timing belt (21652)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (28450)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (199437)
£77.34
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Shock Absorber |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 12.5 mm |
| Shock Absorber Type | Oil Pressure |
| Weight | 1.75 kg |
| Min. Length | 306 mm |
| Pipe Diameter | 53 mm. 45 mm |
| Max. Length | 481 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.62
Important compatibility info
| Width | 40 mm |
| Thickness | 116 mm |
| Cone Size | 28.6 mm |
| Function | Ball Head |
| Placement on Vehicle | Front Axle |
| Length | 122.5 mm |
| Internal Thread Size | M26 x 1,5 |
| Type | Ball Head |
| External Thread Size | M20 x 1,5 |
| Weight | 1.515 kg |
| Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.67
Important compatibility info
| Joint Type | Tripod Joint |
| Weight | 0.187 kg |
| Length | 111 mm |
| Material | Thermoplast |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Inner diameter 1 | 23 mm |
| Inner diameter 2 | 82 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (172865)
- 1x Febi Molybdenum Grease (02582)
£17.02
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023