Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 2.670 kg |
| Height | 476 mm |
| Outer diameter | 267 mm |
| Inner diameter | 170 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Outer length 1 | 1130 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Placement on Vehicle | Right |
| Weight | 0.835 kg |
| Inner length 1 | 835 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Number of Wings | 6 |
| Material | Cast Aluminium |
| Additional Information | with gasket/seal |
| Water pump impeller material | Metal |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Seal Material | Paper |
| Weight | 1.27 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Screw length below head | 688 mm |
| Weight | 0.743 kg |
| for OE number | 21100909 |
| Type | Sender Unit, fuel tank |
| Function | Sender Unit, fuel tank |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Type | Sealing Set, air compressor |
| Weight | 0.35 kg |
| Function | Sealing Set, air compressor |
| for OE number | 4256 2099 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Length | 70 mm |
| Width | 45 mm |
| Function | Tensioner, timing chain |
| Weight | 0.123 kg |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Weight | 2.021 kg |
| Paired article numbers | 44519 |
| Outer Length | 470 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing, with ball joint |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (33625)
- 1x Febi Nut, ball joint (23696)
£62.16
Important compatibility info
| Function | Alternator Freewheel Clutch |
| Inner diameter | 17 mm |
| Width | 37.6 mm |
| Outer diameter | 54.9 mm |
| Weight | 0.467 kg |
| Tightening Torque | 85 Nm |
| Number of Ribs | 6 |
| Additional Information 2 | with lid |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Weight | 1.88 kg |
| Placement on Vehicle | Front Axle Left, Rear |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 40362 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with bearing, with ball joint |
| Replaces | 40369 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (29242)
- 1x Febi Screw (37927)
- 1x Febi Nut (34653)
- 1x Febi Nut (38356)
£62.16
Important compatibility info
| Weight | 0.1 kg |
| Number of Connectors / Ports | 13 |
| Combi Switch Function | with klaxon, with light dimmer function, with indicator function, with high beam function |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Weight | 0.889 kg |
| Outer diameter | 73 mm |
| Number of Ribs | 6 |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Width of castor bearing surface | 25 mm |
| Type | Belt Tensioner, v-ribbed belt |
| for OE number | 022 145 299 D |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Weight | 6.9 kg |
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Placement on Vehicle | Front Axle |
| Length | 751 mm. 801 mm |
| Rod/Strut | Push Rod |
| Cone Size | 28.6 mm |
| Pipe Diameter | 42 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Outer diameter | 70 mm |
| Additional Information | with fastening/mounting material |
| Material | Plastic |
| Operating Mode | Automatic |
| Weight | 1.467 kg |
| Width of castor bearing surface | 35 mm |
| Type | Belt Tensioner, V-ribbed belt |
| Function | Belt Tensioner, V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| External Thread Size | M12 x 1,75 |
| Placement on Vehicle | Lower, Front Axle Right |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 19849 |
| Cone Size | 16.3 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 1.722 kg |
| Additional Information 2 | with ball joint |
| Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Wheel Sided Joint Diameter | 91.2 mm |
| Min. Length | 534 mm |
| External Teeth, Diff.Side | 26 |
| Weight | 6.288 kg |
| External Teeth, Wheel Side | 36 |
| Thread Size | M10x1,5 |
| Additional Information 2 | with screw |
| Placement on Vehicle | Front Axle Left |
| Transmission-side joint diameter | 86 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 19850 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 1.722 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Weight | 7.162 kg |
| Length | 820 mm |
| Outer diameter | 40 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Function | Centre Rod Assembly |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Weight | 0.941 kg |
| Function | Joint, propshaft |
| Placement on Vehicle | Rear |
| Outer diameter | 126 mm |
| Bolt Hole Circle Diameter | 96 mm |
| Additional Information 2 | with bolts/screws |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Number of Holes | 6 |
| Type | Joint, propshaft |
| for OE number | 26 11 7 527 392 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (26332)
- 1x Febi Assembly Kit, propshaft joint (43512)
£62.16
Important compatibility info
| Weight | 0.17 kg |
| Type | Repair Kit, gear shift lever |
| Function | Repair Kit, gear shift lever |
| Fill Medium | Brake Fluid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 729 mm |
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Weight | 6.240 kg |
| External Thread Size | M24 x 1,5 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| External Thread Size | M12 x 1,75, M16 x 2 |
| Function | Shock Absorber, driver cab suspension |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Weight | 2.1 kg |
| Placement on Vehicle | Rear |
| Operating Mode | Pneumatic |
| Max. Length | 427 mm |
| Min. Length | 325 mm |
| Pipe Diameter | 56 mm. 43.5 mm |
| Piston conrod diameter | 12 mm |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Cone Size | 32 mm |
| Length | 387 mm |
| Rod/Strut | Push Rod |
| Pipe Diameter | 36 mm |
| Placement on Vehicle | Front Axle, from the steering gear to the 1st idler arm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M27 x 1,5 |
| Weight | 4.18 kg |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Weight | 0.262 kg |
| Material | Plastic |
| Bore Diameter | 19 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Replaces | 26842 |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 52 mm |
| Outer diameter | 85 mm |
| Inner diameter | 32 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Weight | 3.910 kg |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Weight | 1.4 kg |
| Outer diameter | 161 mm |
| Thickness | 26 mm |
| Inner diameter | 30 mm |
| Number of Ribs | 4 |
| Parameter | 5PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Outer diameter | 44 mm |
| Inner diameter | 8.11 mm |
| Function | Slave Cylinder, engine brake |
| Weight | 0.315 kg |
| Length | 172.8 mm |
| Type | Slave Cylinder, engine brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 330 mm |
| Thickness | 123 mm |
| Brake Disc Thickness | 34 mm |
| Brake Disc Type | Internally Vented |
| Number of Holes | 12 |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 138 mm |
| Surface | Coated |
| Function | Brake Disc |
| Internal Thread Size | M12 x 1,75 |
| Type | Brake Disc |
| Weight | 18.0 kg |
| Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Weight | 3.66 kg |
| Placement on Vehicle | Front Axle Left |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 41266 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.17
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 22 mm |
| Weight | 6.717 kg |
| Paired article numbers | 176966 |
| Steering arm type | Control Arm |
| Material | Steel |
| Placement on Vehicle | Lower Front Axle, Right |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.19
Important compatibility info
| Weight | 0.02 kg |
| Length | 64.2 mm |
| Number of Connectors / Ports | 3 |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.20
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023