Important compatibility info
Weight | 0.68 kg |
Placement on Vehicle | Front Axle Left, Lower, Rear |
Material | Aluminium |
Paired article numbers | 33972 |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information | with holder |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Centre |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 32106 |
Steering arm type | Control Arm |
Weight | 0.539 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,5 |
Weight | 1.790 kg |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 32232 |
Additional Information | with lock nut |
Material | Aluminium |
Steering arm type | Control Arm |
Placement on Vehicle | Front Axle Left, Upper |
Additional Information 2 | with bearing, with ball joint |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Upper |
Paired article numbers | 171327 |
Weight | 0.222 kg |
Type | Holder, engine mounting system |
Function | Holder, engine mounting system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.14 kg |
Type | Filter, cabin air |
Filter type | Activated Carbon Filter |
Function | Filter, cabin air |
Length | 210 mm |
Height | 29 mm |
Width | 205 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Aluminium |
Number of Teeth | 28 |
Number of Wings | 8 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber |
Weight | 1.229 kg |
Type | Water Pump, engine cooling |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Mounting points diameter | 18 mm |
Weight | 0.335 kg |
Placement on Vehicle | Left |
Length | 533 mm |
Paired article numbers | 24731 |
Housing Diameter | 18 mm |
Eject Force | 330 N |
Stroke | 216 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, bonnet |
Type | Gas Spring, bonnet |
Housing length | 351.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.074 kg |
Height | 104 mm |
Outer diameter | 82 mm |
Inner diameter | 41 mm |
Filter type | Filter Insert |
Function | Oil Filter |
Type | Oil Filter |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Min. Length | 230 mm |
Pipe Diameter | 40 mm |
Function | Shock Absorber, driver cab suspension |
Placement on Vehicle | Left Front, Right Front |
Mounting points diameter | 12 mm. 18 mm |
Weight | 2.05 kg |
Max. Length | 264 mm |
Operating Mode | Mechanical |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Piston conrod diameter | 12 mm |
Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Belts | with rounded tooth profile |
Weight | 0.86 kg |
Function | Timing Belt Kit |
Surface | Coated |
Number of Teeth | 131 |
Width | 25 mm |
Type | Timing Belt Kit |
for OE number | 16 06 384 SK |
Units / Pulleys | incl. tensioner pulley, incl. deflection pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (23411)
- 1x Febi Tensioner Pulley, timing belt (21652)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (28450)
Important compatibility info
Placement on Vehicle | Rear Axle |
Function | Shock Absorber |
Mounting points diameter | 16 mm |
Piston conrod diameter | 12.5 mm |
Shock Absorber Type | Oil Pressure |
Weight | 1.75 kg |
Min. Length | 306 mm |
Pipe Diameter | 53 mm. 45 mm |
Max. Length | 481 mm |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Type | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 40 mm |
Thickness | 116 mm |
Cone Size | 28.6 mm |
Function | Ball Head |
Placement on Vehicle | Front Axle |
Length | 122.5 mm |
Internal Thread Size | M26 x 1,5 |
Type | Ball Head |
External Thread Size | M20 x 1,5 |
Weight | 1.515 kg |
Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Joint Type | Tripod Joint |
Weight | 0.187 kg |
Length | 111 mm |
Material | Thermoplast |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Inner diameter 1 | 23 mm |
Inner diameter 2 | 82 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (172865)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Width | 25 mm |
Number of Teeth | 139 |
Surface | Coated |
Type | Water Pump & Timing Belt Kit |
Function | Water Pump & Timing Belt Kit |
Weight | 1.359 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (39200)
- 1x Febi Water Pump, engine cooling (21856)
Important compatibility info
Placement on Vehicle | Front Axle Left |
Type | Tie Rod End |
Spanner Size | 23 |
Internal Thread Size | M14 x 1,5 |
External Thread Size | M14 x 1,5 |
Function | Tie Rod End |
Length | 149 mm |
Weight | 0.794 kg |
Paired article numbers | 186265 |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 73 mm |
Outer diameter | 65 mm |
Inner diameter | 33 mm |
Filter type | Filter Insert |
Seal Diameter | 78 mm |
Function | Oil Filter |
Weight | 0.035 kg |
Type | Oil Filter |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.238 kg |
Placement on Vehicle | Front, Left |
Length | 340 mm |
Width | 186 mm |
Height | 42 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Grey Cast Iron |
Number of Wings | 5 |
Function | Water Pump, engine cooling |
Water pump impeller material | Grey Cast Iron |
Type | Water Pump, engine cooling |
Additional Information | with gaskets/seals, with lock nut |
Weight | 5.930 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 141 mm |
Width | 293 mm |
Thickness | 215 mm |
Function | Expansion Tank, coolant |
Additional Information 2 | without lid |
Weight | 0.740 kg |
Type | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.626 kg |
Placement on Vehicle | Front Axle |
Width | 37 mm |
Outer diameter | 66 mm |
Inner diameter | 34.5 mm |
Function | Wheel Bearing Kit |
Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
Type | Wheel Bearing Kit |
Additional Information | with fastening/mounting material |
Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Nut, kingpin (08023)
- 1x Febi Circlip (04019)
- 1x Febi Nut, ball joint (21884)
- 1x Febi Wheel Bearing (39158)
- 1x Febi Nut (39159)
Important compatibility info
Weight | 0.25 kg |
Type | Repair Kit, tilt cylinder |
Inner diameter | 16.36 mm. 25.2 mm |
Outer diameter | 40 mm. 39.03 mm |
Function | Repair Kit, tilt cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Steering Column Switch |
Weight | 0.213 kg |
Length | 333 mm |
Voltage | 24 V |
Combi Switch Function | with wipe-wash function |
Number of Connectors / Ports | 12 |
Type | Steering Column Switch |
for OE number | 20553740 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.160 kg |
for OE number | 5 0404 7580 |
Type | Oil Pump |
Function | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1435 mm |
Function | Cable Pull, parking brake |
Weight | 0.325 kg |
Type | Cable Pull, parking brake |
Placement on Vehicle | Left Rear, Right Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with lock nut |
Weight | 0.546 kg |
Type | Tie Rod End |
Function | Tie Rod End |
Internal Thread Size | M16 x 1,5 |
Placement on Vehicle | Front Axle Right |
Length | 91 mm |
Paired article numbers | 184022 |
External Thread Size | M12 x 1,5 |
Spanner Size | 23 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Air Filter |
Function | Air Filter |
Placement on Vehicle | Front, Right |
Length | 258 mm |
Height | 58 mm |
Width | 230 mm |
Filter type | Filter Insert |
Weight | 0.31 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 257 mm |
Height | 54 mm |
Width | 163 mm |
Filter type | Filter Insert |
Weight | 0.31 kg |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.01 kg |
Outer diameter | 34 mm |
Thickness | 0.13 mm |
Inner diameter | 19 mm |
Surface | Diamond-coated |
Function | Washer, crankshaft pulley |
Type | Washer, crankshaft pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.284 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 138 |
Type | Timing Chain |
Function | Timing Chain |
Additional Information
Technical Information
Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 80 mm |
Material | Steel |
Spanner Size | 17, 13 |
Rod/Strut | Coupling Rod |
Colour | Black |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Weight | 0.18 kg |
Type | Link/Coupling Rod, stabiliser bar |
External Thread Size | M8 x 1,25, M10 x 1,25 |
Additional Information 2 | with washers |
Additional Information | with nuts, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023