Proud to be a UK-based company
Contact us
Important compatibility info
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 182340 |
| Brake caliper piston diameter | 54 mm |
| Function | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.73
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.73
Important compatibility info
| Cable Length | 207 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | after soot particulate filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.74
Important compatibility info
| Function | Gasket Set, wheel hub |
| Type | Gasket Set, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Circlip (24757)
- 1x Febi Thrust Washer, external planetary gearbox (24759)
- 1x Febi Shaft Seal, wheel hub (24760)
- 1x Febi Shaft Seal, wheel hub (24761)
- 1x Febi Sensor Ring, ABS (18612)
- 1x Febi Ring, wheel hub (22842)
£62.76
Important compatibility info
| Material | Cast Iron |
| Placement on Vehicle | Rear Axle Left |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 182051 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
| Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.76
Important compatibility info
| Brake caliper piston diameter | 38 mm |
| Placement on Vehicle | Rear Axle Right |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Paired article numbers | 182050 |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.76
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 40365 |
| Steering arm type | Control Arm |
| Material | Cast Steel |
| Placement on Vehicle | Front Axle Right, Lower, Rear |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with bearing |
| Additional Information | with nuts, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (30256)
- 1x Febi Nut (06877)
- 1x Febi Camber Correction Screw (21560)
- 1x Febi Nut (21557)
£62.77
Important compatibility info
| for OE number | 27301-2B010 |
| Function | Ignition Coil |
| Number of Connectors / Ports | 2 |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.78
Important compatibility info
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Driver Position | for right-hand drive vehicles |
| Inner length 1 | 928 mm |
| Outer length 1 | 930 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.78
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 1 723 144 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.78
Important compatibility info
| Placement on Vehicle | Front |
| Number of Connectors / Ports | 4 |
| Function | Wiper Motor |
| Additional Information | with fastening/mounting material |
| Voltage | 12 V |
| Type | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.79
Important compatibility info
| Function | Ring Gear, flywheel |
| Width | 18 mm |
| Outer diameter | 475 mm |
| Inner diameter | 430 mm |
| Number of Teeth | 148 |
| Type | Ring Gear, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.81
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 275 mm |
| Thickness | 49 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62.1 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.81
Important compatibility info
| Placement on Vehicle | Rear Axle |
| for OE number | 620 320 00 28 |
| Function | Repair Kit, stabiliser bush |
| Type | Repair Kit, stabiliser bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Fastening Bolt, stabiliser bar (06728)
- 4x Febi Mounting, stabiliser bar (06727)
- 4x Febi Mounting, stabiliser bar (04759)
- 2x Febi Mounting, stabiliser bar (06716)
- 2x Febi Washer (05267)
- 2x Febi Washer (06861)
- 2x Febi Circlip (04760)
- 2x Febi Nut (05054)
- 2x Febi Nut (06878)
£62.82
Important compatibility info
| Length | 70 mm |
| Width | 45 mm |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.82
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Number of Holes | 6 |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
| Extra Description | ProKit |
| Additional Information 2 | with fastening material, with ball bearing |
| for OE number | 31 30 6 881 929 S1 |
| Internal Thread Size | M8 x 1,25 |
Additional Information
Technical Information
Vehicles can be equipped with different suspension strut mount differing in terms of quantity of fitting holes (3 or 6) and thread (M8 or M10). Please identify the fitted product for comparison. More information in the attached technical bulletin.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Repair Kit, suspension strut support mount (102532)
- 6x Febi Screw (104749)
- 1x Febi Screw (104665)
- 1x Febi Protective Cap/Bellow, shock absorber (46486)
- 1x Febi Nut (34653)
- 1x Febi Rubber Buffer, suspension (39953)
- 1x Febi Nut (104819)
£62.83
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.84
Important compatibility info
| Length | 174 mm |
| Width | 123 mm |
| Outer diameter | 53 mm |
| Thickness | 42 mm |
| Inner diameter | 22 mm |
| Internal Thread Size | M8 x 1,25 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Bearing, selector-/shift rod |
| Type | Bearing, selector-/shift rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.84
Important compatibility info
| Material | Aluminium |
| Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| External Thread Size | M12 x 1,5 |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (30907)
- 1x Febi Nut (39199)
£62.85
Important compatibility info
| Number of Teeth | 119 |
| Function | Timing Belt Kit |
| Width | 27 mm |
| Type | Timing Belt Kit |
| for OE number | 13 0C 115 08R |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (100170)
- 1x Febi Tensioner Pulley, timing belt (100519)
- 1x Febi Pulley Bolt (30153)
£62.85
Important compatibility info
| Number of Teeth | 10 |
| Rated Power | 1.1 kW |
| Voltage | 12 V |
| Function | Starter |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.85
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Surface | Coated |
| Centering Diameter | 70 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Minimum thickness | 23 mm |
| Brake Disc Thickness | 26 mm |
| Thickness | 43.2 mm |
| Outer diameter | 278 mm |
| Placement on Vehicle | Front Axle |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.86
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Number of Chain Links | 138 |
| Chain Type | Silent Chain, Closed chain |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.87
Important compatibility info
| Rotor Style | Internally Vented |
| Replaces | 43942 |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 296 mm |
| Thickness | 44 mm |
| Brake Disc Thickness | 26 mm |
| Minimum thickness | 24 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.87
Important compatibility info
| Type | Cylinder Head, air compressor |
| Function | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.89
Important compatibility info
| Replaces | 27882 |
| Additional Information | with lock nut |
| Placement on Vehicle | Front Axle Left, Lower, Front |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 21444 |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M14 x 1,5 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Cone Size | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.91
Important compatibility info
| Height | 166 mm |
| Width | 144 mm |
| Inspection Tag | EMC, ADR |
| Rated Power | 12 W |
| Light Design | LED |
| Cable Length | 260 mm |
| Fastening Type | 3-point attachment |
| Voltage from | 9 V |
| Voltage to | 30 V |
| Protection Type (IP Code) | IP67 |
| Type | Rotating Beacon |
| Fulfils ECE norm | R65, R10 |
| Temperature range from | -30 °C |
| Temperature range to | 50 °C |
| Function | Rotating Beacon |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.91
Important compatibility info
| Outer diameter | 70 mm |
| Additional Information | with fastening/mounting material |
| Material | Plastic |
| Operating Mode | Automatic |
| Width of castor bearing surface | 35 mm |
| Type | Belt Tensioner, V-ribbed belt |
| Function | Belt Tensioner, V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.91
Important compatibility info
| Housing length | 195 mm |
| Mounting points diameter | 10 mm |
| Length | 316 mm |
| Eject Force | 1860 N |
| Stroke | 71 mm |
| Housing Diameter | 35 mm |
| Piston conrod diameter | 10 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.92
Important compatibility info
| Combi Switch Function | with hazard warning light function, with fog-lamp function, with rear fog light function, with light dimmer function |
| Function | Switch, headlight |
| Type | Switch, headlight |
| Control Type | Rotary Operation |
| Switch | with dimmer switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.92
Important compatibility info
| Function | Shock Absorber |
| Piston conrod diameter | 12.5 mm |
| Mounting points diameter | 16 mm |
| Pipe Diameter | 53 mm. 45 mm |
| Min. Length | 286 mm |
| Max. Length | 427 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Front Axle |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.94
Important compatibility info
| Type | Suspension, propshaft |
| Function | Suspension, propshaft |
| Hole Spacing | 135 mm |
| Length | 164 mm |
| Bearing Type | Ball Bearing |
| Inner diameter | 35 mm |
| Additional Information 2 | with ball bearing |
| Placement on Vehicle | Centre |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.97
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
| External Teeth, Wheel Side | 36 |
| External Teeth, Diff.Side | 23 |
| Min. Length | 904 mm |
| Wheel Sided Joint Diameter | 79.4 mm |
| Transmission-side joint diameter | 74.2 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.98
Important compatibility info
| Number of Connectors / Ports | 2 |
| Cable Length | 1070 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.99
Important compatibility info
| Length | 290 mm |
| Additional Information 2 | with ball bearing |
| Inner diameter | 30 mm |
| Bearing Type | Ball Bearing |
| Type | Suspension, propshaft |
| Function | Suspension, propshaft |
| Hole Spacing | 228 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.99
Important compatibility info
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| for OE number | 11 21 043 44R |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.99
Important compatibility info
| Type | Centre Rod Assembly |
| Cone Size | 17.8 mm |
| Function | Centre Rod Assembly |
| Placement on Vehicle | Front Axle, Centre |
| Rod/Strut | Push Rod |
| Driver Position | for right-hand drive vehicles |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.00
Important compatibility info
| Function | Window Regulator |
| Type | Window Regulator |
| Paired article numbers | 176412 |
| Operating Mode | Electric |
| Additional Information | without electric motor |
| Placement on Vehicle | Left Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.00
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 44379 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.01
Important compatibility info
| Width | 36 mm |
| Outer diameter | 78 mm |
| Mounting points diameter | 8 mm |
| Type | Tensioner Pulley, timing belt |
| Function | Tensioner Pulley, timing belt |
| Width of castor bearing surface | 31 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.03
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Type | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Additional Information 2 | with seal ring, with bolts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.03
Important compatibility info
| Combi Switch Function | with klaxon, with indicator function, with wipe-wash function, with high beam function |
| Number of Connectors / Ports | 16 |
| Function | Steering Column Switch |
| Cable Length | 730 mm |
| Voltage | 24 V |
| Length | 220 mm |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.03
Important compatibility info
| Brake Disc Thickness | 40 mm |
| Thickness | 54.5 mm |
| Placement on Vehicle | Front Axle |
| Minimum thickness | 37 mm |
| Brake Disc Type | Internally Vented |
| Inner diameter | 145 mm |
| Outer diameter | 310 mm |
| Bolt Hole Circle Diameter | 140 mm |
| Centering Diameter | 114 mm |
| Surface | Coated |
| Rim Hole Number | 6 -Hole |
| Type | Brake Disc |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.03
Important compatibility info
| Internal Teeth, wheel side | 25 |
| Type | Joint Kit, drive shaft |
| External Teeth, Wheel Side | 37 |
| Function | Joint Kit, drive shaft |
| Thread Size | M16 x 1,5 |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Bolt Head/Nut Design | Hexagon Socket |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.03
Important compatibility info
| Inner diameter | 36 mm |
| Type | Connecting Rod, air compressor |
| Function | Connecting Rod, air compressor |
| Hole Spacing | 125.9 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.03
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 330 mm |
| Thickness | 62.8 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 19.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.04
Important compatibility info
| Material | Metal |
| Operating Mode | Automatic |
| Type | Vibration Damper, v-ribbed belt |
| Function | Vibration Damper, V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.05
Important compatibility info
| Additional Information 2 | with mounting sleeve |
| Type | Housing, water pump |
| Function | Housing, water pump |
| Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.05
Important compatibility info
| Function | Window Regulator |
| Type | Window Regulator |
| Paired article numbers | 175799 |
| Operating Mode | Electric |
| Additional Information | without electric motor |
| Placement on Vehicle | Left Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.06
Important compatibility info
| Function | Oil sump |
| Type | Oil sump |
| Spanner Size | 19 |
| Length | 429 mm |
| Extra Description | febi Plus |
| External Thread Size | M13 |
| Additional Information | with oil drain plug |
| Additional Information 2 | with bore for oil-level sensor, with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.06
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023