Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Right Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.18
Important compatibility info
| Length | 316 mm |
| Outer diameter | 68 mm |
| Filter type | In-Line Filter, with filter heating |
| Pipe Diameter | 8 mm |
| Type | Fuel filter |
| Housing material | Plastic |
| Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.18
Important compatibility info
| Centering Diameter | 59 mm |
| Rotor Style | Internally Vented |
| Thickness | 43.4 mm |
| Placement on Vehicle | Front Axle |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Surface | Coated |
| Bolt Hole Circle Diameter | 98 mm |
| Minimum thickness | 24.2 mm |
| Brake Disc Thickness | 26 mm |
| Outer diameter | 281 mm |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.19
Important compatibility info
| Placement on Vehicle | Front Axle Right, Wheel Side |
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (30023)
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (38765)
- 1x Febi Nut, kingpin (30028)
- 1x Febi Molybdenum Grease (02582)
£61.21
Important compatibility info
| Function | Oil Cooler, engine oil |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.21
Important compatibility info
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 38 mm |
| Inner diameter | 15 mm |
| Outer diameter | 78 mm |
| Material | Metal |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Mounting points diameter | 15 mm |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.22
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Sensor, compressed-air system |
| External Thread Size | M16 x 1,5 |
| Type | Sensor, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.25
Important compatibility info
| Rotor Style | Solid |
| Rim Hole Number | 6 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 315 mm |
| Thickness | 84 mm |
| Brake Disc Thickness | 18 mm |
| Minimum thickness | 16.4 mm |
| Bolt Hole Circle Diameter | 139.7 mm |
| Centering Diameter | 108 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.25
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Exhaust Manifold |
| Number of Connectors / Ports | 2 |
| Cable Length | 290 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.26
Important compatibility info
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 181182 |
| Brake caliper piston diameter | 60 mm |
| Placement on Vehicle | Front Axle Right |
| Function | Brake Caliper |
| Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.30
Important compatibility info
| Height | 200 mm |
| Outer diameter 1 | 82 mm |
| Outer diameter 2 | 99 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.30
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Function | Valve, crankcase ventilation |
| Extra Description | febi Plus |
| Additional Information 2 | with bolts/screws |
| Type | Valve, crankcase ventilation |
| Additional Information | with gasket/seal, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Valve, crankcase ventilation (47725)
- 1x Febi Gasket, crankcase ventilation (44481)
- 1x Febi Hose, cylinder head cover ventilation (100463)
- 1x Febi Hose, cylinder head cover ventilation (100659)
- 4x Febi Screw (107188)
£61.31
Important compatibility info
| Outer diameter | 142 mm |
| Thickness | 72 mm |
| Inner diameter | 44 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
| Bearing Type | Tapered Roller Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.32
Important compatibility info
| Function | Pressure Converter, exhaust control |
| Operating Mode | Electric-pneumatic |
| Voltage | 12 V |
| Extra Description | febi Plus |
| Type | Pressure Converter, exhaust control |
| Number of Connectors / Ports | 2 |
| for OE number | 1H0 906 627 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.32
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Cone Size 2 | 21.4 mm |
| External Thread Size | M12 x 1,25 |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 17.4 mm |
| Paired article numbers | 188190 |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Material | Steel |
| Additional Information | with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.32
Important compatibility info
| Function | Water Pump, engine cooling |
| Seal Material | Rubber |
| Water pump impeller material | Plastic |
| Number of Wings | 8 |
| Number of Teeth | 29 |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
| Housing material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.33
Important compatibility info
| Minimum thickness | 14.2 mm |
| Surface | Coated |
| Number of mounting bores | 5 |
| Function | Brake Disc |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 300 mm |
| Thickness | 80 mm |
| Bolt Hole Circle Diameter | 130 mm |
| Centering Diameter | 79 mm |
| Brake Disc Thickness | 16 mm |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.34
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| for OE number | 651 200 21 70 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.34
Important compatibility info
| Function | Brake Disc |
| Number of mounting bores | 5 |
| Surface | Coated |
| Centering Diameter | 73 mm |
| Bolt Hole Circle Diameter | 118 mm |
| Minimum thickness | 25.9 mm |
| Brake Disc Thickness | 28 mm |
| Thickness | 71.5 mm |
| Outer diameter | 280 mm |
| Placement on Vehicle | Front Axle |
| Type | Brake Disc Rotor |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.34
Important compatibility info
| Hole Spacing | 220 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Bearing Type | Rolling Bearing |
| Inner diameter | 75 mm |
| Additional Information 2 | with rolling bearing |
| Additional Information | with fastening/mounting material |
| Length | 264 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.34
Important compatibility info
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Number of mounting bores | 1 |
| for OE number | 910 423 02 00 07 |
| Surface | Coated |
| Centering Diameter | 85 mm |
| Bolt Hole Circle Diameter | 130 mm |
| Minimum thickness | 16 mm |
| Brake Disc Thickness | 18 mm |
| Thickness | 71 mm |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 298 mm |
| Rotor Style | Solid |
| Rim Hole Number | 6 -Hole |
| Vehicle Equipment | for vehicles without electric parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.34
Important compatibility info
| Brake Pad | without lining |
| Type | Brake Shoe Set |
| Placement on Vehicle | Front Axle, Rear Axle |
| Function | Brake Shoe Set |
| Thickness | 8 mm |
| for OE number | 3095195 |
| Width | 175 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Brake Shoe (12217)
- 1x Febi Brake Shoe (12216)
£61.36
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 356 mm |
| Thickness | 62.1 mm |
| Brake Disc Thickness | 36 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Bolt Hole Circle Diameter | 120 mm |
| Minimum thickness | 34.4 mm |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.37
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Rated Power | 384 W |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.37
Important compatibility info
| Height | 277 mm |
| Outer diameter | 116 mm |
| Filter type | Filter Insert |
| Type | Oil Filter |
| Function | Oil Filter |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.39
Important compatibility info
| for OE number | 14 41 576 06R |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for turbocharger (art. no.) | 186753 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.39
Important compatibility info
| Number of Connectors / Ports | 2. 4 |
| Opening Temperature | 100 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.40
Important compatibility info
| Voltage | 12 V |
| Operating Mode | Electric |
| Number of Connectors / Ports | 2 |
| Additional Information | without holder |
| Function | Auxiliary water pump (cooling water circuit) |
| Type | Auxiliary water pump (cooling water circuit) |
| Replaces | 177172 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.40
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 340 mm |
| Thickness | 43 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 17.5 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 64 mm |
| Surface | Coated |
| Rim Hole Number | 5 -Hole |
| Number of mounting bores | 1 |
| Rotor Style | Internally Vented |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.40
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 6 |
| Lock System | with double sealing |
| Placement on Vehicle | Right Rear |
| Additional Information | with adjuster |
| Paired article numbers | 178975 |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.40
Important compatibility info
| Operating Mode | Electric |
| Placement on Vehicle | Left Rear |
| Additional Information | with adjuster |
| Paired article numbers | 178974 |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
| Lock System | with double sealing |
| Number of Connectors / Ports | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.40
Important compatibility info
| Material | Aluminium |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 34521 |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Left, Lower, Rear |
| Additional Information | with lock nut |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.41
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178823 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.41
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178822 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.41
Important compatibility info
| Function | Cylinder Head, air compressor |
| Type | Cylinder Head, air compressor |
| Additional Information 2 | with bolts/screws |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.42
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 278 mm |
| Thickness | 68.5 mm |
| Brake Disc Thickness | 22 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.43
Important compatibility info
| Function | Pump, fuel pre-supply |
| External Thread Size | M16 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
| Type | Pump, fuel pre-supply |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.44
Important compatibility info
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 302 mm |
| Thickness | 60.2 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8.4 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 69 mm |
| Surface | Coated |
| Number of mounting bores | 3 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.49
Important compatibility info
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle Left |
| Outer diameter | 348 mm |
| Thickness | 66.5 mm |
| Brake Disc Thickness | 36 mm |
| Minimum thickness | 34.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Paired article numbers | 104950 |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
Additional Information
Technical Information
Attention, this is a sided brake disc.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.56
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle Right |
| Outer diameter | 348 mm |
| Thickness | 66.5 mm |
| Brake Disc Thickness | 36 mm |
| Minimum thickness | 34.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Paired article numbers | 104949 |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
Technical Information
Attention, this is a sided brake disc.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.56
Important compatibility info
| Brake caliper piston diameter | 38 mm |
| Paired article numbers | 181663 |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Aluminium |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.56
Important compatibility info
| Material | Cast Aluminium |
| Placement on Vehicle | Rear Axle Right |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
| Paired article numbers | 181662 |
| Brake Caliper Type | Brake Caliper (1 piston) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.56
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 132 |
| Timing Chain Size | G68HR |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.57
Important compatibility info
| Function | Master Cylinder, clutch |
| Fill Medium | Brake Fluid |
| Driver Position | for right-hand drive vehicles |
| Bore Diameter | 16 mm |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.57
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 297 mm |
| Thickness | 52.5 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.57
Important compatibility info
| Number of Connectors / Ports | 3 |
| Material | Plastic |
| Function | Sensor, intake manifold pressure |
| Type | Sensor, intake manifold pressure |
| for OE number | 62 38 927 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.58
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Upper |
| Steering arm type | Triangular Control Arm (CV) |
| Material | Aluminium |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 183403 |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.58
Important compatibility info
| Steering arm type | Triangular Control Arm (CV) |
| Material | Aluminium |
| Placement on Vehicle | Rear Axle Right, Upper |
| Additional Information | with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 183402 |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.58
Important compatibility info
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| External Teeth, Diff.Side | 24 |
| Additional Information | with Split Pin |
| Placement on Vehicle | Front Axle Left |
| Function | Drive Shaft |
| Min. Length | 590 mm |
| ABS Ring Diameter | 90 mm |
| Wheel Sided Joint Diameter | 86 mm |
| Transmission-side joint diameter | 76 mm |
| Type | Drive Shaft |
| Paired article numbers | 180790 |
| External Teeth, Wheel Side | 25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.58
Important compatibility info
| Number of Connectors / Ports | 5 |
| Type | Mass Air Flow Sensor |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| for OE number | 12671611 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.60
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023