Important compatibility info
| Number of Connectors / Ports | 2 |
| Cable Length | 1070 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 290 mm |
| Additional Information 2 | with ball bearing |
| Inner diameter | 30 mm |
| Bearing Type | Ball Bearing |
| Type | Suspension, propshaft |
| Function | Suspension, propshaft |
| Hole Spacing | 228 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| for OE number | 11 21 043 44R |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | Plastic |
| Colour | Black |
| Number of Connectors / Ports | 6 |
| Function | Sensor, headlight levelling |
| Type | Sensor, headlight levelling |
| Voltage | 5 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Centre Rod Assembly |
| Cone Size | 17.8 mm |
| Function | Centre Rod Assembly |
| Placement on Vehicle | Front Axle, Centre |
| Rod/Strut | Push Rod |
| Driver Position | for right-hand drive vehicles |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Window Regulator |
| Type | Window Regulator |
| Paired article numbers | 176412 |
| Operating Mode | Electric |
| Additional Information | without electric motor |
| Placement on Vehicle | Left Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 44379 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Master Cylinder |
| Internal Thread Size | M10 x 1 |
| Type | Brake Master Cylinder |
| Hole Spacing | 90 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 36 mm |
| Outer diameter | 78 mm |
| Mounting points diameter | 8 mm |
| Type | Tensioner Pulley, timing belt |
| Function | Tensioner Pulley, timing belt |
| Width of castor bearing surface | 31 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Type | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Additional Information 2 | with seal ring, with bolts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Combi Switch Function | with klaxon, with indicator function, with wipe-wash function, with high beam function |
| Number of Connectors / Ports | 16 |
| Function | Steering Column Switch |
| Cable Length | 730 mm |
| Voltage | 24 V |
| Length | 220 mm |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Brake Disc Thickness | 40 mm |
| Thickness | 54.5 mm |
| Placement on Vehicle | Front Axle |
| Minimum thickness | 37 mm |
| Brake Disc Type | Internally Vented |
| Inner diameter | 145 mm |
| Outer diameter | 310 mm |
| Bolt Hole Circle Diameter | 140 mm |
| Centering Diameter | 114 mm |
| Surface | Coated |
| Rim Hole Number | 6 -Hole |
| Type | Brake Disc |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Type | Interior Blower |
| Function | Interior Blower |
| Driver Position | for right-hand drive vehicles |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Teeth, wheel side | 25 |
| Type | Joint Kit, drive shaft |
| External Teeth, Wheel Side | 37 |
| Function | Joint Kit, drive shaft |
| Thread Size | M16 x 1,5 |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Bolt Head/Nut Design | Hexagon Socket |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 36 mm |
| Type | Connecting Rod, air compressor |
| Function | Connecting Rod, air compressor |
| Hole Spacing | 125.9 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 330 mm |
| Thickness | 62.8 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 19.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Metal |
| Operating Mode | Automatic |
| Type | Vibration Damper, v-ribbed belt |
| Function | Vibration Damper, V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with mounting sleeve |
| Type | Housing, water pump |
| Function | Housing, water pump |
| Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Window Regulator |
| Type | Window Regulator |
| Paired article numbers | 175799 |
| Operating Mode | Electric |
| Additional Information | without electric motor |
| Placement on Vehicle | Left Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Oil sump |
| Type | Oil sump |
| Spanner Size | 19 |
| Length | 429 mm |
| Extra Description | febi Plus |
| External Thread Size | M13 |
| Additional Information | with oil drain plug |
| Additional Information 2 | with bore for oil-level sensor, with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
| Paired article numbers | 184702 |
| Brake Caliper Type | Brake Caliper (1 piston) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cone Size | 32 mm |
| Length | 387 mm |
| Rod/Strut | Push Rod |
| Pipe Diameter | 36 mm |
| Placement on Vehicle | Front Axle, from steering gear to 1st intermediate steering lever |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M27 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Sheet Steel |
| Additional Information 2 | with bolts/screws |
| Steering arm type | Control Arm |
| Paired article numbers | 180383 |
| Cone Size | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with rubber mounts, with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with fastening/mounting material |
| Function | Repair Kit, v-ribbed belt tensioner |
| Type | Repair Kit, v-ribbed belt tensioner |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tensioner Lever, v-ribbed belt (01310)
- 1x Febi Vibration Damper, v-ribbed belt (08779)
- 1x Febi Bearing Journal, tensioner pulley lever (01963)
- 1x Febi Washer (11695)
- 1x Febi Lid, tensioner pulley lever (11696)
- 1x Febi Seal Ring (44316)
Important compatibility info
| Number of Chain Links | 106 |
| Timing Chain Size | D67ZN |
| Chain Type | Duplex, with chain lock |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| for OE number | 102 050 10 11 S5 |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (09231)
- 1x Febi Tensioner, timing chain (01050)
Important compatibility info
| Function | Charge Air Hose |
| Placement on Vehicle | Left |
| Type | Charge Air Hose |
| Turbocharger line | Charge air cooler to intake manifold |
| Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
| Number of Connectors / Ports | 3 |
| Material | Plastic |
| Water pump impeller material | Plastic |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Oxygen Sensor |
| Cable Length | 710 mm |
| Function | Oxygen Sensor |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | V-Ribbed Belt Set |
| Length | 1205 mm |
| Width of castor bearing surface | 25 mm |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (177984)
- 1x Febi Belt Tensioner, v-ribbed belt (180107)
Important compatibility info
| Additional Information | with temperature sensor, with gasket/seal |
| Opening Temperature | 88 °C |
| Housing Type | with housing |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





























