Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 179435 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 40 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thread Size | M22x1,5 |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Left |
| Transmission-side joint diameter | 81.5 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Wheel Sided Joint Diameter | 82.0 mm |
| Min. Length | 595 mm |
| External Teeth, Diff.Side | 34 |
| External Teeth, Wheel Side | 26 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Function | Brake Caliper |
| Brake caliper piston diameter | 34 mm |
| Type | Brake Caliper |
| Paired article numbers | 185639 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| Placement on Vehicle | behind exhaust turbocharger |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 13 |
| Combi Switch Function | with indicator function, with hazard warning light function, with high beam function, with headlight flasher |
| Type | Steering Column Switch |
| Function | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 1031 mm |
| Number of circuits | 3 |
| Lambda Sensor | Heated, Regulating Sensor |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Screw length below head | 245 mm |
| Number of Teeth | 26 |
| Rotation Direction | Clockwise rotation |
| Length | 296 mm |
| Outer diameter | 98 mm |
| Function | Brake Shaft, drum brake |
| Type | Brake Shaft, drum brake |
| Paired article numbers | 179425 |
| Placement on Vehicle | Left Front |
| Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 295 mm |
| Thickness | 50 mm |
| Brake Disc Thickness | 22 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Surface | Coated |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Internally Vented |
| Minimum thickness | 19.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Brake Disc Thickness | 22 mm |
| Thickness | 58.5 mm |
| Outer diameter | 300 mm |
| Placement on Vehicle | Rear Axle |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rim Hole Number | 6 -Hole |
| Placement on Vehicle | Rear Axle |
| Minimum thickness | 13 mm |
| Bolt Hole Circle Diameter | 125 mm |
| Centering Diameter | 76 mm |
| Number of mounting bores | 1 |
| Mounting points diameter | 15.6 mm |
| Function | Brake Disc |
| Outer diameter | 296 mm |
| Thickness | 69.5 mm |
| Brake Disc Thickness | 16 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Additional Information 2 | with ABS sensor ring |
| Rotor Style | Solid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Hydraulic |
| Function | Actuator, seat adjustment |
| Type | Actuator, seat adjustment |
| Inner diameter 2 | 8 mm |
| Inner diameter 1 | 4.6 mm |
| Inner diameter 3 | 8.1 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Duplex |
| Function | Guide Rails Kit, timing chain |
| Type | Guide Rails Kit, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Coolant Pipe |
| Function | Coolant Pipe |
| Material | PA (polyamide) |
| Additional Information 2 | with sensor |
| Number of Connectors / Ports | 2 |
| Cooling Hose | from engine to water pipe |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Electric |
| Voltage | 12 V |
| Function | Auxiliary water pump (cooling water circuit) |
| Number of Connectors / Ports | 2 |
| Additional Information 2 | with cable |
| Type | Auxiliary water pump (cooling water circuit) |
| for OE number | 7N0 965 561 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 27213 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with hydro mount |
| Additionally Required Parts | 32412 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (26181)
Important compatibility info
| Extra Description | ProKit |
| Outer diameter | 150 mm |
| Thickness | 35 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Type | Joint, propshaft |
| Function | Joint, propshaft |
| Number of Holes | 6 |
| Additional Information 2 | with bolts/screws, with washers |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (101779)
- 3x Febi Screw (109456)
- 3x Febi Screw (109454)
- 3x Febi Washer (19107)
- 6x Febi Nut (19104)
Important compatibility info
| Placement on Vehicle | Intake Side |
| Paired article numbers | 104242 |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Additional Information 2 | without screw |
| Number of Teeth | 38 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Sheet Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint |
| Paired article numbers | 42292 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 380 mm |
| Thickness | 81 mm |
| Brake Disc Thickness | 34 mm |
| Minimum thickness | 31 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















