Proud to be a UK-based company
Contact us
Important compatibility info
| Width | 30 mm |
| Outer diameter | 162 mm |
| Additional Information 2 | with screw |
| Inner diameter | 38 mm |
| Parameter | 7 PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (177635)
- 1x Febi Screw (173360)
£62.75
Important compatibility info
| Function | Gasket Set, wheel hub |
| Type | Gasket Set, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Circlip (24757)
- 1x Febi Thrust Washer, external planetary gearbox (24759)
- 1x Febi Shaft Seal, wheel hub (24760)
- 1x Febi Shaft Seal, wheel hub (24761)
- 1x Febi Sensor Ring, ABS (18612)
- 1x Febi Ring, wheel hub (22842)
£62.76
Important compatibility info
| for OE number | 27301-2B010 |
| Function | Ignition Coil |
| Number of Connectors / Ports | 2 |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.78
Important compatibility info
| Placement on Vehicle | Front |
| Number of Connectors / Ports | 4 |
| Function | Wiper Motor |
| Additional Information | with fastening/mounting material |
| Voltage | 12 V |
| Type | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.79
Important compatibility info
| Inner diameter | 30 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with ABS sensor ring, with bolts/screws |
| Outer diameter | 85 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Width | 52 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.79
Important compatibility info
| Placement on Vehicle | Front |
| Outer diameter | 124 mm |
| Inner diameter | 33 mm |
| Bolt Hole Circle Diameter | 80 mm |
| Thickness | 24 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.81
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 275 mm |
| Thickness | 49 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62.1 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.81
Important compatibility info
| Placement on Vehicle | Rear Axle |
| for OE number | 620 320 00 28 |
| Function | Repair Kit, stabiliser bush |
| Type | Repair Kit, stabiliser bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Fastening Bolt, stabiliser bar (06728)
- 4x Febi Mounting, stabiliser bar (06727)
- 4x Febi Mounting, stabiliser bar (04759)
- 2x Febi Mounting, stabiliser bar (06716)
- 2x Febi Washer (05267)
- 2x Febi Washer (06861)
- 2x Febi Circlip (04760)
- 2x Febi Nut (05054)
- 2x Febi Nut (06878)
£62.82
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Number of Holes | 6 |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
| Extra Description | ProKit |
| Additional Information 2 | with fastening material, with ball bearing |
| for OE number | 31 30 6 881 929 S1 |
| Internal Thread Size | M8 x 1,25 |
Additional Information
Technical Information
Vehicles can be equipped with different suspension strut mount differing in terms of quantity of fitting holes (3 or 6) and thread (M8 or M10). Please identify the fitted product for comparison. More information in the attached technical bulletin.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Repair Kit, suspension strut support mount (102532)
- 6x Febi Screw (104749)
- 1x Febi Screw (104665)
- 1x Febi Protective Cap/Bellow, shock absorber (46486)
- 1x Febi Nut (34653)
- 1x Febi Rubber Buffer, suspension (39953)
- 1x Febi Nut (104819)
£62.83
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.84
Important compatibility info
| Length | 174 mm |
| Width | 123 mm |
| Outer diameter | 53 mm |
| Thickness | 42 mm |
| Inner diameter | 22 mm |
| Internal Thread Size | M8 x 1,25 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Bearing, selector-/shift rod |
| Type | Bearing, selector-/shift rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.84
Important compatibility info
| External Thread Size | M12 x 1,75, M16 x 2 |
| Function | Shock Absorber, driver cab suspension |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Placement on Vehicle | Rear |
| Operating Mode | Pneumatic |
| Max. Length | 427 mm |
| Min. Length | 325 mm |
| Pipe Diameter | 56 mm. 43.5 mm |
| Piston conrod diameter | 12 mm |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.84
Important compatibility info
| Placement on Vehicle | Left |
| Length | 223 mm |
| Width | 180 mm |
| Thickness | 20 mm |
| Voltage | 12 V |
| Outer/Inner Mirror | Heatable |
| Type | Mirror Glass, exterior mirror |
| Camber Radius | 1200 mm |
| Function | Mirror Glass, exterior mirror |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.84
Important compatibility info
| Number of Teeth | 119 |
| Function | Timing Belt Kit |
| Width | 27 mm |
| Type | Timing Belt Kit |
| for OE number | 13 0C 115 08R |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (100170)
- 1x Febi Tensioner Pulley, timing belt (100519)
- 1x Febi Pulley Bolt (30153)
£62.85
Important compatibility info
| Number of Teeth | 10 |
| Rated Power | 1.1 kW |
| Voltage | 12 V |
| Function | Starter |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.85
Important compatibility info
| Number of Connectors / Ports | 4 |
| Number of circuits | 4 |
| Cable Length | 640 mm |
| External Thread Size | M18 x 1,5 |
| Function | Oxygen Sensor |
| Type | Oxygen Sensor |
| Lambda Sensor | Heated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.85
Important compatibility info
| Combi Switch Function | with klaxon, with indicator function, with wipe-wash function, with high beam function |
| Number of Connectors / Ports | 16 |
| Function | Steering Column Switch |
| Cable Length | 730 mm |
| Voltage | 24 V |
| Length | 220 mm |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.87
Important compatibility info
| Function | Idle Control Valve, air supply |
| Operating Mode | Electric |
| Number of Connectors / Ports | 4 |
| Type | Idle Control Valve, air supply |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.87
Important compatibility info
| Rotor Style | Internally Vented |
| Replaces | 43942 |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 296 mm |
| Thickness | 44 mm |
| Brake Disc Thickness | 26 mm |
| Minimum thickness | 24 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.87
Important compatibility info
| Function | Sensor, fuel pressure |
| Number of Connectors / Ports | 3 |
| External Thread Size | M10 x 1 |
| Type | Sensor, fuel pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.87
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Paired article numbers | 179454 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 45 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.87
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Paired article numbers | 179453 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 45 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.87
Important compatibility info
| Brake Type | Disc Brake |
| Parameter | Typ 16 / 24 |
| Stroke | 64 mm |
| Distance of fastening bolts | 120 mm |
| Piston Rod Length | 15 mm |
| Function | Diaphragm Brake Cylinder |
| Internal Thread Size | M16 x 1,5 |
| Type | Diaphragm Brake Cylinder |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.89
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Iron |
| Placement on Vehicle | Rear Axle Left |
| Brake caliper piston diameter | 48 mm |
| Paired article numbers | 181700 |
| Function | Brake Caliper |
| Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.90
Important compatibility info
| Length | 375 mm |
| Height | 94 mm |
| Width | 247 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
| Additional Information 2 | with pre-filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.95
Important compatibility info
| Type | Suspension, propshaft |
| Function | Suspension, propshaft |
| Hole Spacing | 135 mm |
| Length | 164 mm |
| Bearing Type | Ball Bearing |
| Inner diameter | 35 mm |
| Additional Information 2 | with ball bearing |
| Placement on Vehicle | Centre |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.97
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
| External Teeth, Wheel Side | 36 |
| External Teeth, Diff.Side | 23 |
| Min. Length | 904 mm |
| Wheel Sided Joint Diameter | 79.4 mm |
| Transmission-side joint diameter | 74.2 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.98
Important compatibility info
| Number of Connectors / Ports | 2 |
| Cable Length | 1070 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.99
Important compatibility info
| Placement on Vehicle | Right |
| Length | 223 mm |
| Width | 180 mm |
| Thickness | 20 mm |
| Voltage | 12 V |
| Outer/Inner Mirror | Heatable |
| Type | Mirror Glass, exterior mirror |
| Camber Radius | 1200 mm |
| Function | Mirror Glass, exterior mirror |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.00
Important compatibility info
| Length | 345 mm |
| Width | 236 mm |
| Thickness | 237 mm |
| Function | Expansion Tank, coolant |
| Additional Information | with coolant level sensor |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.01
Important compatibility info
| for OE number | 006 153 75 28 |
| Number of Connectors / Ports | 3 |
| Function | Sensor, fuel pressure |
| Type | Sensor, fuel pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.02
Important compatibility info
| Width | 36 mm |
| Outer diameter | 78 mm |
| Mounting points diameter | 8 mm |
| Type | Tensioner Pulley, timing belt |
| Function | Tensioner Pulley, timing belt |
| Width of castor bearing surface | 31 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.03
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 330 mm |
| Thickness | 62.8 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 19.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.04
Important compatibility info
| Placement on Vehicle | Left Front |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.05
Important compatibility info
| Type | Sensor, exhaust gas temperature |
| Cable Length | 580 mm |
| Function | Sensor, exhaust gas temperature |
| Number of Connectors / Ports | 2 |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.05
Important compatibility info
| Function | Window Regulator |
| Type | Window Regulator |
| Paired article numbers | 175799 |
| Operating Mode | Electric |
| Additional Information | without electric motor |
| Placement on Vehicle | Left Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.06
Important compatibility info
| Outer diameter | 60 mm |
| Bolt Hole Circle Diameter | 106.5 mm |
| Number of Holes | 5 |
| Outer diameter 1 | 65 mm |
| Width | 78 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Inner diameter | 30 mm |
| Additional Information 2 | with RPM sensor |
| Outer diameter 2 | 140 mm |
| Function | Wheel Bearing Kit |
| Replaces | 19654 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.07
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
| Paired article numbers | 184702 |
| Brake Caliper Type | Brake Caliper (1 piston) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.07
Important compatibility info
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Width | 24 mm |
| Number of Teeth | 190 |
| Belts | with trapezoidal tooth profile |
| Function | Timing Belt Kit |
| Additional Information 2 | with bolts/screws |
| Type | Timing Belt Kit |
| for OE number | 71736726 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (10984)
- 1x Febi Tensioner Pulley, timing belt (10298)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (23654)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (178788)
£63.08
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 180831 |
| Cone Size | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.08
Important compatibility info
| Function | Control Element, parking brake caliper |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Rear Axle Right |
| Extra Description | febi Plus |
| Type | Control Element, parking brake caliper |
| Paired article numbers | 194744 |
| Number of Teeth | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.08
Important compatibility info
| Cone Size | 32 mm |
| Length | 387 mm |
| Rod/Strut | Push Rod |
| Pipe Diameter | 36 mm |
| Placement on Vehicle | Front Axle, from steering gear to 1st intermediate steering lever |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M27 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.10
Important compatibility info
| Function | Repair Kit, suspension strut support mount |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 102748 |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.10
Important compatibility info
| Placement on Vehicle | Rear Axle, Front Axle |
| Type | Repair Kit, brake caliper |
| Function | Repair Kit, brake caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.10
Important compatibility info
| Additional Information | with fastening/mounting material |
| Function | Repair Kit, v-ribbed belt tensioner |
| Type | Repair Kit, v-ribbed belt tensioner |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tensioner Lever, v-ribbed belt (01310)
- 1x Febi Vibration Damper, v-ribbed belt (08779)
- 1x Febi Bearing Journal, tensioner pulley lever (01963)
- 1x Febi Washer (11695)
- 1x Febi Lid, tensioner pulley lever (11696)
- 1x Febi Seal Ring (44316)
£63.11
Important compatibility info
| Placement on Vehicle | Left Front |
| Paired article numbers | 19465 |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.11
Important compatibility info
| Number of Connectors / Ports | 6 |
| Function | Sensor, headlight levelling |
| Material | Plastic |
| Type | Sensor, headlight levelling |
| Voltage | 5 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.11
Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 70 |
| Function | Chain Kit, oil pump drive |
| Timing Chain Size | Z46VC |
| Type | Chain Kit, oil pump drive |
| Extra Description | Full Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.11
Important compatibility info
| Function | Charge Air Hose |
| Placement on Vehicle | Left |
| Type | Charge Air Hose |
| Turbocharger line | Charge air cooler to intake manifold |
| Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.11
Important compatibility info
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
| Number of Connectors / Ports | 3 |
| Material | Plastic |
| Water pump impeller material | Plastic |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.11
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023