Important compatibility info
Weight | 0.080 kg |
Placement on Vehicle | Centre |
Length | 830 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with screw |
Weight | 0.178 kg |
Width | 35 mm |
Material | Metal |
Outer diameter | 57 mm |
Function | Deflection Pulley/Guide Pulley, timing belt |
Replaces | 14542 |
Type | Deflection Pulley/Guide Pulley, timing belt |
Width of castor bearing surface | 29 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.025 kg |
Placement on Vehicle | Front Axle, Wheel Side |
Material | Thermoplast |
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 88 mm |
Inner diameter 1 | 30 mm |
Length | 115 mm |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (45644)
- 1x Febi Bellow, drive shaft (29956)
- 1x Febi Clamping Clip (29816)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Placement on Vehicle | both sides |
Material | ACM (Polyacrylate) |
Outer diameter | 56 mm |
Thickness | 7 mm |
Inner diameter | 27.95 mm |
Function | Shaft Seal, manual transmission flange |
Weight | 0.008 kg |
Type | Shaft Seal, manual transmission flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, inner, Rear Axle Right |
Material | Rubber/Metal |
Outer diameter | 44.9 mm |
Thickness | 50 mm |
Inner diameter | 12 mm |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Weight | 0.100 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.074 kg |
Placement on Vehicle | Front Axle Right |
Paired article numbers | 106319 |
Number of Connectors / Ports | 2 |
Cable Length | 855 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, manual transmission |
Type | Mounting, manual transmission |
Bearing/Mounting Type | Rubber-Metal Mount |
Weight | 2.167 kg |
Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M10 x 1 |
Weight | 0.08 kg |
External Thread Size | M10 x 1 |
Placement on Vehicle | Front Axle Left, at brake caliper |
Length | 395 mm |
Spanner Size | 14, 17 |
Type | Brake Hose |
Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front |
Operating Mode | Pneumatic |
Weight | 1.3 kg |
Shock Absorber Mounting Type | Top pin, Bottom Pin |
Max. Length | 352 mm |
Min. Length | 253 mm |
Piston Diameter | 12 mm |
Pipe Diameter | 45 mm. 62 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
External Thread Size | M14 x 1,5 |
Cone Size 2 | 18 mm |
Cone Size | 15 mm |
Weight | 2.786 kg |
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Paired article numbers | 181824 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 182162 |
Cone Size | 26 mm |
Type | Control/Trailing Arm, wheel suspension |
Weight | 5.442 kg |
Steering arm type | Control Arm |
Cone Size 1 | 21 mm |
Placement on Vehicle | Front Axle Right |
Material | Sheet Steel |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | E14 |
Thread Length | 85 mm |
Bolt Head/Nut Design | Male Torx |
Function | Cylinder Head Bolt |
Screw length below head | 124 mm |
Length | 136 mm |
Weight | 0.113 kg |
External Thread Size | M12 x 1,5 |
Number of screws | 10 |
Type | Cylinder Head Bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Wear Warning Contact | prepared for wear warning indicator |
Function | Brake Pad Set, disc brake |
Thickness/Strength 1 | 17.8 mm |
Inspection Tag | ECE R90 Approved |
Brake System | Bosch |
Width | 52.8 mm |
Length | 105 mm |
Placement on Vehicle | Rear Axle |
Type | Brake Pad Set, disc brake |
Weight | 0.902 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.266 kg |
Material | Metal |
Outer diameter | 80 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Type | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 31 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Camshaft Adjuster |
Extra Description | febi Plus |
Type | Camshaft Adjuster |
Weight | 1.618 kg |
Number of Teeth | 42. 70 |
Placement on Vehicle | Intake Side, Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with clamp |
Placement on Vehicle | Charge Air Cooler |
Turbocharger line | Turbocharger to charge air cooler |
Function | Charge Air Hose |
Type | Charge Air Hose |
Outer diameter 2 | 66 mm |
Weight | 0.591 kg |
Outer diameter 1 | 62 mm |
Material | AEM (Ethylene Acrylate Rubber) |
Inner diameter 2 | 56 mm |
Inner diameter 1 | 52 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.113 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 191 mm |
Material | Rubber |
Inner diameter 1 | 12 mm |
Inner diameter 2 | 53 mm |
Function | Bellow, steering |
Type | Bellow, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.8 kg |
Replaces | 43122 |
External Thread Size | M14 x 1,5 |
Internal Thread Size | M12 x 1,25 |
Placement on Vehicle | Front Axle Left, Lower |
Paired article numbers | 28701 |
Type | Ball Joint |
Function | Ball Joint |
Extra Description | ProKit |
Additional Information | with fastening/mounting material |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.9 kg |
Placement on Vehicle | Front Axle Left |
Length | 258 mm |
Paired article numbers | 29605 |
Function | Tie Rod End |
External Thread Size | M12 x 1,75 |
Internal Thread Size | M14 x 1,5 |
Type | Tie Rod End |
Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
External Thread Size | M8 x 1,25 |
Weight | 0.500 kg |
Placement on Vehicle | Front Axle |
Thread Length | 22.5 mm |
Function | Repair Kit, suspension strut support mount |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | without ball bearing, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left |
Rod/Strut | Guide Rod |
Paired article numbers | 23963 |
Steering arm type | Control Arm |
Weight | 0.616 kg |
Additional Information | with rubber mounts |
Type | Rod/Strut, wheel suspension |
Function | Rod/Strut, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.90 kg |
External Thread Size | M12 x 1,5 |
Placement on Vehicle | Front Axle Left, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 33611 |
Cone Size | 18 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Alternator |
Current Strength | 130 A |
Belt Pulley Diameter | 82 mm |
Alternator Charge Current | 130 A |
Pulleys | with belt pulley |
Weight | 7.45 kg |
Function | Alternator |
Voltage | 24 V |
Number of Ribs | 8 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.30 kg |
Height | 177 mm |
Outer diameter | 89 mm |
Filter type | In-Line Filter, with water separator |
Pipe Diameter | 8 mm |
Function | Fuel filter |
Type | Fuel filter |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.294 kg |
Placement on Vehicle | Wheel Side, Front Axle |
Length | 140 mm |
Material | Thermoplast |
Inner diameter 1 | 27 mm |
Inner diameter 2 | 88 mm |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100039)
- 1x Febi Clamping Clip (29200)
- 1x Febi Clamping Clip (45644)
- 2x Febi Molybdenum Grease (02582)
Important compatibility info
Function | Intake Hose, air filter |
Material | PVC, NBR (nitrile butadiene rubber) |
Inner diameter 1 | 72 mm |
Colour | Black |
Inner diameter 2 | 81 mm |
Weight | 0.255 kg |
Extra Description | febi Plus |
Type | Intake Hose, air filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.408 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Wheel Bearing Kit |
Bearing Type | Tapered Roller Bearing |
Width 2 | 17.5 mm |
Outer diameter 2 | 50 mm |
Width 1 | 18 mm |
Outer diameter 1 | 62 mm |
Inner diameter 2 | 22 mm |
Inner diameter 1 | 35 mm |
Type | Wheel Bearing Kit |
Additional Information 2 | with shaft seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (27163)
- 1x Febi Wheel Bearing (27164)
- 1x Febi Shaft Seal, wheel hub (27165)
Important compatibility info
Weight | 0.050 kg |
Function | Sensor Ring, ABS |
Number of Teeth, ABS ring | 48 |
Inner diameter | 72 mm |
Outer diameter | 82 mm |
Material | Steel |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.120 kg |
Function | Tensioner, timing chain |
Operating Mode | Hydraulic |
Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M16 x 1,5 |
Weight | 6.17 kg |
Min. Length | 486 mm |
Max. Length | 821 mm |
Shock Absorber Design | Telescopic Shock Absorber |
Placement on Vehicle | Rear Axle |
Shock Absorber Type | Oil Pressure |
Shock Absorber Mounting Type | Top pin, Bottom eye |
Pipe Diameter | 76 mm. 63.4 mm |
Mounting points diameter | 22 mm |
Piston conrod diameter | 20 mm |
Function | Shock Absorber |
Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023