Important compatibility info
| Type | Parts Set, maintenance service |
| Function | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (27799)
- 2x Febi Oil Filter (35425)
- 1x Febi Fuel filter (35426)
- 1x Febi Fuel filter (35342)
- 1x Febi Seal Ring, oil drain plug (103152)
- 2x Febi Seal Ring (05552)
- 2x Febi Gasket, external planetary gearbox (08010)
Important compatibility info
| Outer diameter | 489 mm |
| Inner diameter | 458 mm |
| Number of Teeth | 161 |
| Function | Ring Gear, flywheel |
| Width | 22 mm |
| Type | Ring Gear, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 105736 |
| Cone Size | 21 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber-metal mounts |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Filter type | Filter Insert |
| Outer diameter | 220 mm |
| Height | 737 mm |
| Function | Air Filter |
| Type | Air Filter |
| Outer diameter 1 | 146 mm |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 23 mm |
| Number of Teeth | 138 |
| Surface | Coated |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (23634)
- 1x Febi Water Pump, engine cooling (15900)
Important compatibility info
| Outer diameter 1 | 68 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 46 mm |
| Outer diameter | 93 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Inner diameter | 30 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Outer diameter 2 | 140 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (172781)
- 1x Febi Nut, kingpin (173786)
Important compatibility info
| Outer diameter | 86 mm |
| Width | 62 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| Inner diameter | 30 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gasket/seal, with temperature sensor |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
| Number of Connectors / Ports | 2 |
| Opening Temperature | 105 °C |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Control Valve, camshaft adjustment |
| Function | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
| Placement on Vehicle | Intake Side, Exhaust Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | without electric motor |
| Function | Window Regulator |
| Type | Window Regulator |
| Operating Mode | Electric |
| Paired article numbers | 175797 |
| Placement on Vehicle | Right Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Brake caliper piston diameter | 35 mm |
| Placement on Vehicle | Rear Axle Right |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 181165 |
| Material | Cast Iron |
| Function | Brake Caliper |
| Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Drive Shaft |
| Wheel Sided Joint Diameter | 84.5 mm |
| Min. Length | 556 mm |
| External Teeth, Diff.Side | 34 |
| Transmission-side joint diameter | 94 mm |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 33 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Paired article numbers | 183067 |
| Additional Information | with rubber-metal mounts |
| Material | Aluminium |
| Placement on Vehicle | Upper, Rear Axle Left, Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with gear |
| for OE number | 77 01 693 575 |
| Type | Oil Pump |
| Function | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Metal |
| Outer diameter | 76 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Function | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 21 |
| External Teeth, Diff.Side | 22 |
| Min. Length | 810 mm |
| Wheel Sided Joint Diameter | 85.7 mm |
| Transmission-side joint diameter | 69.3 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Paired article numbers | 183169 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Window Regulator |
| Type | Window Regulator |
| Placement on Vehicle | Right Rear |
| Operating Mode | Electric |
| Paired article numbers | 186309 |
| Additional Information | without electric motor |
| Number of Doors | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Joint Kit, drive shaft |
| Int. teeth, diff.side, conn.to transm. | 24 |
| Type | Joint Kit, drive shaft |
| External Teeth, Diff.Side | 25 |
| Placement on Vehicle | transmission sided, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 762 mm |
| Additional Information 2 | with crown nut |
| Thread Size | M27 x 1,5 |
| Rod/Strut | Push Rod |
| Cone Size | 32 mm |
| Pipe Diameter | 42 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with rubber-metal mount |
| Placement on Vehicle | Rear Axle |
| Length | 420 mm |
| Diameter | 1 mm |
| Rod/Strut | Coupling Rod |
| Bore Diameter | 35 mm. 21 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with dryer |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 545 mm |
| Core Width | 361 mm |
| Core Depth | 16 mm |
| Refrigerant | R 134a |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with bolts/screws |
| Type | Cylinder Head Gasket Set, air compressor |
| Function | Cylinder Head Gasket Set, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 3 |
| Type | Sensor, coolant level |
| Function | Sensor, coolant level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Transmission Type | 5-Speed Manual Transmission |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Transmission ID | F17 |
| Inner length 1 | 847 mm |
| Inner length 2 | 870 mm |
| Outer length 1 | 1150 mm |
| Outer length 2 | 1172 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Metal |
| Outer diameter | 74 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, V-ribbed belt |
| Function | Belt Tensioner, V-ribbed belt |
| Width of castor bearing surface | 33 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with rubber mounts |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | non-switchable water pump |
| Pulleys | with belt pulley |
| Housing material | Cast Aluminium |
| Additional Information | with gasket/seal |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber/Metal |
| for OE number | 642 200 22 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 11 28 7 549 589 |
| Width of castor bearing surface | 24.5 mm |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 22 |
| Combi Switch Function | with indicator function, with rear wipe-wash function, with light dimmer function, with wipe-wash function, with high beam function |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Timing Chain |
| Number of Chain Links | 142 |
| Chain Type | Silent Chain, Closed chain |
| Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
| Number of Connectors / Ports | 2 |
| Cable Length | 600 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Core Depth | 32 mm |
| Core Width | 171 mm |
| Core Length | 178 mm |
| Function | Heat Exchanger, interior heating |
| Type | Heat Exchanger, interior heating |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Window Regulator |
| Paired article numbers | 176520 |
| Operating Mode | Electric |
| Additional Information | without electric motor |
| Placement on Vehicle | Left Front |
| Type | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 174776 |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Internally Vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 330 mm |
| Thickness | 71 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 18.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 164 mm |
| Additional Information 2 | with ball bearing |
| Inner diameter | 30 mm |
| Bearing Type | Ball Bearing |
| Type | Suspension, propshaft |
| Function | Suspension, propshaft |
| Hole Spacing | 135 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Seal, rear window |
| Type | Seal, rear window |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Electric |
| Lock System | with remote control |
| Number of Connectors / Ports | 8 |
| Driver Position | for right-hand drive vehicles |
| Function | Door Lock |
| Type | Door Lock |
| Additional Information | with adjuster |
| Paired article numbers | 179675 |
| Placement on Vehicle | Left Front |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 10 |
| Length | 163 mm |
| Function | Glow Plug |
| Glow Plug Type | after-glow capable, Metal glow plug |
| Voltage | 7 V |
| Fitting Depth | 25.5 mm |
| Colour Coding | white |
| Type | Glow Plug |
| External Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with seal ring |
| Operating Mode | Electric |
| Number of Connectors / Ports | 4. 2 |
| Type | Fuel Feed Unit |
| Function | Fuel Feed Unit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber/Metal |
| Housing material | Cast Aluminium |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Housing material | Cast Aluminium |
| Additional Information | with seal rings |
| Number of Teeth | 20 |
| Housing Type | with housing |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left |
| for OE number | 51855515 |
| Function | Mounting, manual transmission |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Internally Vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 286 mm |
| Thickness | 67 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 18 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Centering Diameter | 65.5 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with fastening/mounting material |
| Internal Thread Size | M16 x 1,5 |
| Parameter | Typ 30 / 30 |
| Stroke | 76 mm |
| Distance of fastening bolts | 120 mm |
| Piston Rod Length | 455 mm |
| Piston Rod Thread | M16 x 1,5 |
| Function | Spring-loaded Cylinder |
| Type | Spring-loaded Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Min. Length | 581 mm |
| External Teeth, Diff.Side | 35 |
| External Teeth, Wheel Side | 27 |
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
| Wheel Sided Joint Diameter | 91 mm |
| Transmission-side joint diameter | 81.5 mm |
| Type | Drive Shaft |
| Paired article numbers | 181114 |
| Placement on Vehicle | Front Axle Right |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Brake Caliper |
| Brake caliper piston diameter | 44 mm |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Function | Brake Caliper |
| Paired article numbers | 183215 |
| Material | Cast Iron |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Brake caliper piston diameter | 44 mm |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Paired article numbers | 183214 |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (2 pistons) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 314 mm |
| Thickness | 71.5 mm |
| Brake Disc Thickness | 18 mm |
| Minimum thickness | 16.4 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 69 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, manual transmission |
| Type | Mounting, manual transmission |
| for OE number | 6Q0 199 555 AR |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































