Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Brake Caliper |
| Brake caliper piston diameter | 35 mm |
| Material | Cast Iron |
| Paired article numbers | 181166 |
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Brake Caliper Type | Brake Caliper (1 piston) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.42
Important compatibility info
| Brake caliper piston diameter | 35 mm |
| Placement on Vehicle | Rear Axle Right |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 181165 |
| Material | Cast Iron |
| Function | Brake Caliper |
| Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.42
Important compatibility info
| Thickness | 156 mm |
| Colour | Black |
| Type | Roll-off Piston, air suspension bellows |
| Outer diameter | 208 mm. 249 mm |
| Placement on Vehicle | Rear Axle |
| Function | Roll-off Piston, air suspension bellows |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.43
Important compatibility info
| Bolt Hole Circle Diameter | 105 mm |
| Outer diameter | 140 mm |
| Thickness | 41 mm |
| Inner diameter | 54 mm |
| Inner diameter 2 | 12 mm |
| Function | Joint, propshaft |
| Outer diameter 2 | 21 mm |
| Type | Joint, propshaft |
| Hole Spacing | 64 mm |
| Replaces | 26292; 48789 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.45
Important compatibility info
| Additional Information 2 | with nut |
| External Teeth, Wheel Side | 25 |
| Thread Size | M24x1,5 |
| Wheel Sided Joint Diameter | 79 mm |
| Min. Length | 944 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 26 |
| Transmission-side joint diameter | 81.5 mm |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.46
Important compatibility info
| Material | Cast Iron |
| Placement on Vehicle | Front Axle Right |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 181960 |
| Brake caliper piston diameter | 60 mm |
| Function | Brake Caliper |
| Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.48
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Transmission-side joint diameter | 79 mm |
| Additional Information 2 | with nut |
| Wheel Sided Joint Diameter | 83.1 mm |
| Min. Length | 895 mm |
| External Teeth, Wheel Side | 23 |
| Thread Size | M20x1,5 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.48
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 29635 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | without holder |
| Additional Information 2 | with rubber mount, without ball joint |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.49
Important compatibility info
| Additional Information 2 | with plug |
| Number of Connectors / Ports | 3 |
| Cable Length | 980 mm |
| Type | Plug |
| Function | Plug |
| Extra Description | febi Plus |
| Additional Information | with squeeze connector |
| Cross Section | 0.75 mm² |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.49
Important compatibility info
| Placement on Vehicle | engine sided |
| for OE number | 1 895 269 |
| Type | Rocker Arm, engine timing |
| Function | Rocker Arm, engine timing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.49
Important compatibility info
| External Thread Size | M18 x 1,5 |
| Internal Thread Size | M28 x 1,5 RHT |
| Placement on Vehicle | Front Axle |
| Length | 875 mm |
| Rod/Strut | Push Rod |
| Cone Size | 22.2 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 36 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.52
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Right, Lower, Rear |
| Material | Cast Steel |
| Inner diameter | 14 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 43693 |
| Cone Size | 22 mm. 19 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.53
Important compatibility info
| Function | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| for OE number | 17 13 8 610 653 |
| Type | Expansion Tank, coolant |
| Additional Information | without coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.53
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Left |
| External Thread Size | M10 x 1,5 |
| Type | Mounting, engine |
| for OE number | 22 11 6 868 489 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.55
Important compatibility info
| Placement on Vehicle | after soot particulate filter |
| Number of Connectors / Ports | 2 |
| Cable Length | 647 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.57
Important compatibility info
| Additional Information 2 | with seal ring |
| Operating Mode | Electric |
| Number of Connectors / Ports | 4. 2 |
| Type | Fuel Feed Unit |
| Function | Fuel Feed Unit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.57
Important compatibility info
| Outer diameter | 90 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 24.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.58
Important compatibility info
| Additional Information 2 | non-switchable water pump |
| Pulleys | with belt pulley |
| Housing material | Cast Aluminium |
| Additional Information | with gasket/seal |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber/Metal |
| for OE number | 642 200 22 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.58
Important compatibility info
| Type | Slave Cylinder, clutch |
| Function | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.59
Important compatibility info
| Function | Repair Kit, automatic adjustment |
| Type | Repair Kit, automatic adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.60
Important compatibility info
| Placement on Vehicle | Outer |
| Material | Plastic |
| Operating Mode | Pneumatic |
| Number of Connectors / Ports | 3 |
| Function | Actuator, seat adjustment |
| Type | Actuator, seat adjustment |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.60
Important compatibility info
| Number of Teeth | 111 |
| Surface | Coated |
| Width of castor bearing surface | 19 mm |
| Width | 17 mm |
| Belts | with rounded tooth profile |
| for OE number | 16 06 368 S1 |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Water pump impeller material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (14115)
- 1x Febi Water Pump, engine cooling (24333)
£65.60
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (4 pistons) |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 42.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.60
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (4 pistons) |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 42.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.60
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 12386 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with holder |
| Replaces | 22705 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.61
Important compatibility info
| External Thread Size | M12 x 1,75 |
| Placement on Vehicle | Right |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.61
Important compatibility info
| Placement on Vehicle | Left |
| for OE number | 21830-1G000 |
| Function | Mounting, manual transmission |
| Type | Mounting, manual transmission |
| Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.61
Important compatibility info
| Rim Hole Number | 6 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 306 mm |
| Thickness | 132 mm |
| Brake Disc Thickness | 28 mm |
| Brake Disc Type | Internally Vented |
| Minimum thickness | 25 mm |
| Bolt Hole Circle Diameter | 215 mm |
| Centering Diameter | 178 mm |
| Surface | Coated |
| Function | Brake Disc |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.62
Important compatibility info
| Additional Information 2 | with oil sump gasket |
| Transmission Type | 8-Speed Dual-Clutch Transmission |
| Type | Hydraulic Filter Kit, automatic transmission |
| Function | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Hydraulic Filter, automatic transmission (194025)
- 1x Febi Hydraulic Filter, automatic transmission (194026)
- 1x Febi Hydraulic Filter, automatic transmission (105810)
- 1x Febi Hydraulic Filter, automatic transmission (186575)
£65.62
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 303 mm |
| Thickness | 71.6 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 18.4 mm |
| Bolt Hole Circle Diameter | 115 mm |
| Centering Diameter | 70 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.63
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023