Important compatibility info
Chain Type | Simplex, Closed chain |
Number of Chain Links | 116 |
Timing Chain Size | G67HP |
Function | Timing Chain |
Additional Information 2 | Requires special tools for mounting |
Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bore Diameter | 19 mm |
Driver Position | for right-hand drive vehicles |
Fill Medium | Brake Fluid |
Function | Master Cylinder, clutch |
Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 345 mm |
Voltage | 12 V |
Rated Power | 350 W |
Function | Fan, engine cooling |
Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 430 mm |
Function | Oil sump |
Extra Description | febi Plus |
Type | Oil sump |
Additional Information | with oil drain plug |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil sump (27300)
- 1x Febi Screw Plug, oil sump (101250)
Important compatibility info
Operating Mode | Mechanical |
Function | Coolant Control Valve |
Type | Coolant Control Valve |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1015 mm |
Height | 14 mm |
Width | 325 mm |
Mounting points diameter | 13 mm |
Function | Gasket, oil sump |
Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Rod/Strut | Push Rod |
Cone Size | 32 mm |
Pipe Diameter | 42 mm |
Function | Centre Rod Assembly |
External Thread Size | M27 x 1,5 |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Expansion Tank, coolant |
Type | Expansion Tank, coolant |
Additional Information 2 | with lid |
Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Wiper Motor |
Number of Connectors / Ports | 5 |
Voltage | 12 V |
Placement on Vehicle | Front |
Type | Wiper Motor |
Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 350 mm |
Rod/Strut | Coupling Rod |
Cone Size | 32 mm |
Pipe Diameter | 36 mm |
Function | Link/Coupling Rod, stabiliser bar |
Placement on Vehicle | Rear Axle |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with lock nut, with rubber mounts |
Placement on Vehicle | Upper, Front Axle Right |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | 107864 |
Cone Size | 14 mm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
External Thread Size | M12 x 1,75 |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Steel |
Placement on Vehicle | Upper, Front Axle Left |
Steering arm type | Control Arm |
Paired article numbers | 107863 |
Cone Size | 14 mm |
Function | Control/Trailing Arm, wheel suspension |
External Thread Size | M12 x 1,75 |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M24 x 1,5 LHT, M24 x 1,5 RHT |
External Thread Size | M18 x 1,5 |
Length | 560 mm |
Rod/Strut | Push Rod |
Cone Size | 22 mm |
Adjustable | Adjustable on both sides |
Pipe Diameter | 30 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Extra Description | ProKit |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 11 53 7 601 158 |
Housing Type | with housing |
Function | Thermostat, coolant |
Opening Temperature | 103 °C |
Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M20 x 1,5 |
Placement on Vehicle | Front Axle |
Length | 600 mm |
Rod/Strut | Push Rod |
Cone Size | 26 mm |
Adjustable | not adjustable |
Pipe Diameter | 42 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Extra Description | ProKit |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 175018 |
Placement on Vehicle | Right |
Number of Connectors / Ports | 6 |
Type | Electric Motor, window regulator |
Function | Electric Motor, window regulator |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Electric Motor, window regulator |
Type | Electric Motor, window regulator |
Number of Connectors / Ports | 6 |
Extra Description | febi Plus |
Placement on Vehicle | Left |
Paired article numbers | 175017 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotation Direction | Clockwise rotation |
Function | Brake Shaft, drum brake |
Type | Brake Shaft, drum brake |
Screw length below head | 146 mm |
Paired article numbers | 175196 |
Number of Teeth | 10 |
Outer diameter | 77.5 mm |
Length | 197 mm |
Placement on Vehicle | Left |
Internal Thread Size | 1/8" BSP |
Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Screw length below head | 146 mm |
Function | Brake Shaft, drum brake |
Paired article numbers | 175195 |
Number of Teeth | 10 |
Outer diameter | 77.5 mm |
Length | 197 mm |
Type | Brake Shaft, drum brake |
Rotation Direction | Anticlockwise rotation |
Placement on Vehicle | Right |
Internal Thread Size | 1/8" BSP |
Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Gasket outer diameter | 71 mm |
Gasket inner diameter | 64 mm |
Filter type | Spin-on Filter |
Function | Hydraulic Filter, automatic transmission |
Type | Hydraulic Filter, automatic transmission |
Outer diameter | 119 mm |
Height | 298 mm |
Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Electric Motor, window regulator |
Type | Electric Motor, window regulator |
Paired article numbers | 175507 |
Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Electric Motor, window regulator |
Type | Electric Motor, window regulator |
Paired article numbers | 175506 |
Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with bolts/screws |
Width | 384 mm |
Length | 328 mm |
Height | 34 mm |
Additional Information | with gasket/seal, Oil sump with permanently integrated filter element, with oil drain plug |
Extra Description | febi Plus |
Function | Oil sump, automatic transmission |
Filter type | Screen Filter |
Type | Oil sump, automatic transmission |
Transmission Type | Automatic Transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Belt Tensioner, V-ribbed belt |
Function | Belt Tensioner, V-ribbed belt |
Width of castor bearing surface | 38 mm |
Width | 68 mm |
Material | Metal |
Outer diameter | 70 mm |
Operating Mode | Automatic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Repair Kit, gear shift lever |
Type | Repair Kit, gear shift lever |
for OE number | 000 260 78 98 S1 |
Fill Medium | Mineral Oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Shock Absorber Mounting Type | Top eye, Bottom Pin |
Type | Shock Absorber, driver cab suspension |
Operating Mode | Pneumatic |
Placement on Vehicle | Rear |
Function | Shock Absorber, driver cab suspension |
Piston Diameter | 16 mm |
Pipe Diameter | 44 mm |
Mounting points diameter | 14 mm |
External Thread Size | M12 x 1,75 |
Max. Length | 344 mm |
Min. Length | 254 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Interior Blower |
Number of Connectors / Ports | 2 |
Driver Position | for right-hand drive vehicles |
Voltage | 12 V |
Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rod/Strut | Push Rod |
Pipe Diameter | 38 mm |
Cone Size | 26 mm |
Adjustable | Adjustable on one side |
Function | Centre Rod Assembly |
Type | Centre Rod Assembly |
Placement on Vehicle | Front Axle |
Length | 926 mm |
Additional Information 2 | with crown nut |
Thread Size | M20 x 1,5 |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Timing Chain |
Function | Timing Chain |
Number of Chain Links | 100 |
Chain Type | Simplex, Closed chain |
Placement on Vehicle | Upper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 11 |
Type | Control Unit, glow time |
Function | Control Unit, glow time |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Colour | Black |
Material | Plastic |
Number of Connectors / Ports | 2 |
Type | Switch, tailgate release |
Function | Switch, tailgate release |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 182437 |
External Teeth, Diff.Side | 25 |
Type | Drive Shaft |
Transmission-side joint diameter | 81.5 mm |
Wheel Sided Joint Diameter | 91 mm |
Placement on Vehicle | Front Axle Right |
Additional Information 2 | with nut |
Thread Size | M24x1,5 |
External Teeth, Wheel Side | 28 |
Function | Drive Shaft |
Min. Length | 596 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1180 mm |
Number of Ribs | 6 |
Type | V-Ribbed Belt Set |
Function | V-Ribbed Belt Set |
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Tensile Cord Material | Polyester |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (28931)
- 1x Febi Belt Tensioner, v-ribbed belt (44980)
Important compatibility info
Type | Cable Pull, manual transmission |
Inner length 1 | 890 mm |
Function | Cable Pull, manual transmission |
Inner length 2 | 892 mm |
Outer length 1 | 120 mm |
Outer length 2 | 1107 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1200 mm |
Number of Ribs | 6 |
Type | V-Ribbed Belt Set |
Function | V-Ribbed Belt Set |
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Tensile Cord Material | Polyester |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (28933)
- 1x Febi Belt Tensioner, v-ribbed belt (44980)
Important compatibility info
Placement on Vehicle | Front Axle Right |
Thread Size | M24x1,5 |
External Teeth, Wheel Side | 25 |
External Teeth, Diff.Side | 24 |
Min. Length | 892 mm |
ABS Ring Diameter | 99 mm |
Transmission-side joint diameter | 77 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Additional Information 2 | with bolts/screws |
Thread Size | M16x1,5 |
Bore Diameter | 8.5 mm |
External Teeth, Wheel Side | 36 |
Number of mounting bores | 6 |
Min. Length | 511 mm |
Wheel Sided Joint Diameter | 78 mm |
Transmission-side joint diameter | 93.2 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cable Length | 350 mm |
Number of circuits | 12 |
Function | Cable Repair Kit, tailgate |
Additional Information | with squeeze connector |
Additional Information 2 | with bellow |
Extra Description | febi Plus |
Type | Cable Repair Kit, tailgate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Material | Sheet Steel |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Internally Vented |
Rim Hole Number | 5 -Hole |
Placement on Vehicle | Rear Axle |
Outer diameter | 330 mm |
Thickness | 63.6 mm |
Brake Disc Thickness | 22 mm |
Minimum thickness | 20 mm |
Bolt Hole Circle Diameter | 127 mm |
Centering Diameter | 72 mm |
Surface | Coated |
Max.skimmed drum measure | 207.2 mm |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing/Mounting Type | Rubber-Metal Mount |
Placement on Vehicle | Left |
Function | Mounting, automatic transmission |
Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 32071 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower, Front |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 38485 |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Additional Information | with fastening/mounting material |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (21219)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (21559)
- 2x Febi Washer (21558)
- 1x Febi Nut (21557)
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower, Front |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 38484 |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with fastening/mounting material |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (21219)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (21559)
- 2x Febi Washer (21558)
- 1x Febi Nut (21557)
Important compatibility info
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Centering Diameter | 75 mm |
Thickness | 76.1 mm |
Minimum thickness | 18.4 mm |
Outer diameter | 300 mm |
Placement on Vehicle | Rear Axle |
Bolt Hole Circle Diameter | 120 mm |
Brake Disc Thickness | 20 mm |
Rim Hole Number | 5 -Hole |
Rotor Style | Internally Vented |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Sealing lip material | NBR (nitrile butadiene rubber) |
Bearing Type | Angular Ball Bearing |
Outer diameter | 70 mm |
Placement on Vehicle | Front Axle |
Additional Information 2 | with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Inner diameter | 30 mm |
Width | 64 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 3 |
Function | Sensor, exhaust pressure |
Type | Sensor, exhaust pressure |
Additional Information | with seal rings |
Sensor Type | Differential Pressure Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Electric Motor, window regulator |
Placement on Vehicle | both sides |
Voltage | 24 V |
Number of Teeth | 9 |
Number of Connectors / Ports | 6 |
Type | Electric Motor, window regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 880 mm |
Outer diameter | 38 mm |
Cone Size | 30 mm |
Type | Tie Rod |
Function | Tie Rod |
Extra Description | ProKit |
External Thread Size | M24 x 1,5 |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Parameter | VL120R |
Function | Clutch, radiator fan |
Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023