Proud to be a UK-based company
Contact us
Important compatibility info
| Material | Aluminium |
| Number of Wings | 10 |
| Weight | 2.25 kg |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.73
Important compatibility info
| Weight | 0.204 kg |
| Additional Information 2 | with oil sump gasket |
| Length | 195 mm |
| Height | 119 mm |
| Width | 182 mm |
| Type | Hydraulic Filter Kit, automatic transmission |
| Function | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.81
Important compatibility info
| Weight | 0.111 kg |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 172048 |
| Number of Connectors / Ports | 2 |
| Resistance | 1800 Ohm |
| Cable Length | 1320 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.55
Important compatibility info
| Outer diameter | 94 mm |
| Inner diameter | 70 mm |
| Width | 50 mm |
| Function | Suspension, propshaft |
| Weight | 3.237 kg |
| Type | Suspension, propshaft |
| Length | 193 mm |
| Additional Information 2 | with ball bearing |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.05
Important compatibility info
| Weight | 0.020 kg |
| Placement on Vehicle | Front Axle, Rear Axle |
| Outer diameter | 68 mm |
| Thickness | 19 mm |
| Inner diameter | 36 mm |
| Function | Seal, brake caliper piston |
| Type | Seal, brake caliper piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.36
Important compatibility info
| for OE number | 51999641 |
| Weight | 0.250 kg |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Left |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.51
Important compatibility info
| Weight | 6.422 kg |
| External Teeth, Wheel Side | 36 |
| Bore Diameter | 10.5 mm |
| Bolt Hole Circle Diameter | 94 mm |
| Thread Size | M20x1,5 |
| Additional Information 2 | with nut |
| Wheel Sided Joint Diameter | 97 mm |
| Number of mounting bores | 6 |
| Min. Length | 517 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 108 mm |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Operating Mode | Hydraulic |
| Function | Tensioner, timing chain |
| Length | 60 mm |
| Weight | 0.210 kg |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.41
Important compatibility info
| Function | Sensor, exhaust gas temperature |
| Number of Connectors / Ports | 2 |
| Weight | 0.049 kg |
| Cable Length | 230 mm |
| Type | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.75
Important compatibility info
| Type | Brake Caliper |
| Paired article numbers | 185638 |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Weight | 1.25 kg |
| Brake caliper piston diameter | 34 mm |
| Function | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.49
Important compatibility info
| Function | Air Filter |
| Type | Air Filter |
| Filter type | Filter Insert |
| Weight | 4.62 kg |
| Inner diameter | 217 mm |
| Outer diameter | 327 mm |
| Length | 515 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.17
Important compatibility info
| Length | 526 mm |
| Weight | 1.7 kg |
| Width | 420 mm |
| Material | Sheet Steel |
| Type | Housing Cover, crankcase |
| Function | Housing Cover, crankcase |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.55
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.055 kg |
| Cable Length | 815 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.15
Important compatibility info
| Placement on Vehicle | Front Axle |
| Minimum thickness | 30 mm |
| Outer diameter | 350 mm |
| Thickness | 48.2 mm |
| Brake Disc Thickness | 32 mm |
| Rotor Style | Internally Vented |
| Weight | 12.72 kg |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.5 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.98
Important compatibility info
| Placement on Vehicle | Intake Side |
| Weight | 1.535 kg |
| Type | Camshaft |
| Function | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£130.42
Important compatibility info
| Cooling Hose | from radiator to water pipe |
| Function | Radiator Hose |
| Type | Radiator Hose |
| Weight | 0.6 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 2.09 kg |
| Length | 2650 mm |
| Outer diameter | 8.5 mm |
| Inner diameter | 4 mm |
| Pressure | 400 bar |
| Function | Hose Line, driver cab tilting device |
| Type | Hose Line, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Inner diameter | 36 mm |
| Width | 170 mm |
| Parameter | 6PK |
| Type | Belt Pulley, crankshaft |
| Weight | 2.459 kg |
| Function | Belt Pulley, crankshaft |
| Outer diameter | 170 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.27
Important compatibility info
| Weight | 0.048 kg |
| Spanner Size | 29 |
| Number of Connectors / Ports | 3 |
| Connector Shape | Rectangular |
| Colour Coding | Black |
| Temperature range from | 95 °C. 102 °C |
| Temperature range to | 84 °C. 92 °C |
| Function | Temperature Switch, radiator fan |
| External Thread Size | M22 x 1,5 |
| Type | Temperature Switch, radiator fan |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.29
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178167 |
| Weight | 2.345 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.63
Important compatibility info
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Type | Brake Caliper |
| Paired article numbers | 181170 |
| Weight | 1.712 kg |
| Brake caliper piston diameter | 35 mm |
| Function | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.39
Important compatibility info
| Additional Information 2 | with clamps |
| Weight | 0.24 kg |
| Placement on Vehicle | Rear Axle, transmission sided |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 63 mm |
| Inner diameter 1 | 25 mm |
| Material | Rubber |
| Type | Bellow Kit, drive shaft |
| Length | 99 mm |
| for OE number | 126 350 03 37 OF |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (08405)
- 1x Febi Fastening Clamp (08406)
- 1x Febi Hose Connector (08407)
- 1x Febi Fastening Clamp (08408)
£9.76
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Weight | 1.366 kg |
| Chain Type | Duplex, with chain lock |
| Number of Chain Links | 186 |
| Timing Chain Size | D67ZN |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.01
Important compatibility info
| Additional Information 2 | with exhaust manifold |
| Weight | 7.0 kg |
| Recommended additional repairs | Repair kit |
| Charge Type | Exhaust Turbocharger |
| Type | Charger, charging (supercharged/turbocharged) |
| Additionally required parts | Mounting Kit |
| Function | Charger, charging (supercharged/turbocharged) |
| Extra Description | BorgWarner Turbo NEW |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£599.37
Important compatibility info
| Weight | 0.094 kg |
| Placement on Vehicle | frontal sided |
| Length | 65 mm |
| Bolt Head/Nut Design | Male Hex |
| Function | Pulley Bolt |
| External Thread Size | M18 x 1,5 |
| Type | Pulley Bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.18
Important compatibility info
| Weight | 0.1 kg |
| Material | Rubber |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.12
Important compatibility info
| Function | Wheel Bearing Kit |
| Bearing Type | Tapered Roller Bearing |
| Weight | 0.274 kg |
| Outer diameter 1 | 40 mm |
| Inner diameter 1 | 17.5 mm |
| Inner diameter 2 | 29 mm |
| Outer diameter 2 | 50 mm |
| Width 1 | 14 mm |
| Width 2 | 14 mm |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (08392)
- 1x Febi Shaft Seal, wheel bearing (03117)
- 1x Febi Nut, kingpin (02817)
- 1x Febi Washer (03119)
- 1x Febi Split Pin (02877)
£11.31
Important compatibility info
| Weight | 0.008 kg |
| Placement on Vehicle | Rear Axle, Front Axle |
| Width | 4.2 mm. 8.5 mm |
| Material | NBR (nitrile butadiene rubber) |
| Outer diameter | 80 mm |
| Inner diameter | 69 mm |
| Type | Shaft Seal, wheel bearing |
| Function | Shaft Seal, wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.46
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 102 mm |
| Width | 58 mm |
| Material | PU (Polyurethane) |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
| Weight | 0.100 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.13
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Resistance | 1185 Ohm |
| Cable Length | 1390 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Weight | 0.094 kg |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.63
Important compatibility info
| Type | Mounting, engine |
| for OE number | 21930-1H050 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Rear |
| Weight | 2.130 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.76
Important compatibility info
| Width | 54.5 mm |
| Length | 120.2 mm |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with fastening material |
| Inspection Tag | ECE R90 Approved |
| Weight | 1.406 kg |
| Thickness/Strength 1 | 18 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.63
Important compatibility info
| Gasket inner diameter | 37 mm. 48.9 mm |
| Gasket outer diameter | 43 mm. 54.14 mm |
| Function | Hydraulic Filter, automatic transmission |
| Type | Hydraulic Filter, automatic transmission |
| Weight | 0.035 kg |
| Filter type | Filter Insert |
| Outer diameter | 44 mm |
| Height | 52 mm |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.55
Important compatibility info
| Weight | 0.01 kg |
| Number of Connectors / Ports | 4 |
| Function | Sensor, intake manifold pressure |
| Type | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.58
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 165 mm |
| Material | Thermoplastic polyester elastomer |
| Paired article numbers | 196672 |
| Inner diameter 1 | 18 mm |
| Inner diameter 2 | 45 mm |
| Weight | 0.076 kg |
| Type | Bellow Kit, steering |
| Function | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.03
Important compatibility info
| Placement on Vehicle | Front Axle |
| Rod/Strut | Push Rod |
| Type | Centre Rod Assembly |
| Pipe Diameter | 52 mm |
| Weight | 10.650 kg |
| Length | 895 mm |
| Additional Information 2 | with crown nut |
| Cone Size | 28.8 mm |
| Adjustable | Adjustable on one side |
| Extra Description | ProKit |
| Function | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.69
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Paired article numbers | 181825 |
| Weight | 3.533 kg |
| Cone Size | 16 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle, Right |
| Additional Information 2 | with ball joint |
| Material | Sheet Steel |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.83
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 125 mm |
| Weight | 1.530 kg |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Extra Description | ProKit |
| External Thread Size | M30 x 1,5 |
| Internal Thread Size | M20 x 1,5 |
| Thread Type | with right-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.64
Important compatibility info
| Material | PU (Polyurethane), Rubber |
| Weight | 0.154 kg |
| Placement on Vehicle | Front Axle |
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (12477)
- 2x Febi Protective Cap/Bellow, shock absorber (17148)
£16.44
Important compatibility info
| Type | Window Regulator |
| Function | Window Regulator |
| Placement on Vehicle | Left Front |
| Additional Information | with fastening/mounting material |
| Operating Mode | Manual |
| Paired article numbers | 182168 |
| Weight | 1.2 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.63
Important compatibility info
| Weight | 1.234 kg |
| Placement on Vehicle | Front Axle |
| Length | 141.2 mm. 140.2 mm |
| Width | 47.3 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 75 mm |
| Outer diameter | 142 mm |
| Additional Information 2 | without wheel bearing |
| Inner diameter | 30 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Weight | 1.486 kg |
| Type | Wheel Hub |
| Function | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.16
Important compatibility info
| Extra Description | febi Plus |
| Function | Camshaft Adjuster |
| Type | Camshaft Adjuster |
| Weight | 0.867 kg |
| Number of Teeth | 40 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£172.99
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Mounting points diameter | 20 mm. 16 mm |
| Max. Length | 704 mm |
| Weight | 6.0 kg |
| Piston conrod diameter | 16 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Pipe Diameter | 70 mm. 80 mm |
| Min. Length | 464 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£183.63
Important compatibility info
| Weight | 0.05 kg |
| Placement on Vehicle | Rear Axle, Upper |
| Material | Rubber/Metal |
| Outer diameter | 49 mm |
| Inner diameter | 10 mm |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Height | 30 mm |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.34
Important compatibility info
| Weight | 0.12 kg |
| Placement on Vehicle | Rear Axle |
| Width | 38 mm |
| Outer diameter | 42 mm |
| Thickness | 38 mm |
| Inner diameter | 12 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.97
Important compatibility info
| Weight | 0.200 kg |
| Pipe Diameter | 8 mm |
| Additional Information | with nuts |
| Placement on Vehicle | Front Axle Right |
| Length | 155 mm |
| Paired article numbers | 21875 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.96
Important compatibility info
| Weight | 0.4 kg |
| External Thread Size | M12 x 1,25 |
| Placement on Vehicle | Front Axle Right |
| Length | 65 mm |
| Paired article numbers | 34120 |
| Rod/Strut | Coupling Rod |
| Colour | Black |
| Surface | Painted |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Material | Steel |
| Spanner Size | 19 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.21
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Weight | 0.49 kg |
| External Thread Size | M14 x 1,5 |
| Function | Ball Joint |
| Hub fastening hole diameter | 45 mm |
| Cone Size | 22 mm |
| Mounting points diameter | 13 mm |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.39
Important compatibility info
| Replaces | 24294 |
| Weight | 2.45 kg |
| Paired article numbers | 24295 |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Material | Steel |
| Placement on Vehicle | Upper, Right |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with bearing |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (01032)
- 1x Febi Mounting, control/trailing arm (06213)
£37.46
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023