Proud to be a UK-based company
Contact us
Important compatibility info
| Additional Information 2 | with screw |
| Weight | 0.178 kg |
| Width | 35 mm |
| Material | Metal |
| Outer diameter | 57 mm |
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Replaces | 14542 |
| Inner diameter | 17 mm |
| Type | Deflection Pulley/Guide Pulley, timing belt |
| Width of castor bearing surface | 29 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.10
Important compatibility info
| Weight | 0.025 kg |
| Placement on Vehicle | Front Axle, Wheel Side |
| Material | Thermoplast |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 88 mm |
| Inner diameter 1 | 30 mm |
| Length | 115 mm |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (45644)
- 1x Febi Bellow, drive shaft (29956)
- 1x Febi Clamping Clip (29816)
- 1x Febi Molybdenum Grease (02582)
£13.55
Important compatibility info
| Placement on Vehicle | both sides |
| Material | ACM (Polyacrylate) |
| Outer diameter | 56 mm |
| Thickness | 7 mm |
| Inner diameter | 27.95 mm |
| Function | Shaft Seal, manual transmission flange |
| Weight | 0.008 kg |
| Type | Shaft Seal, manual transmission flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.80
Important compatibility info
| Placement on Vehicle | Rear Axle Left, inner, Rear Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 44.9 mm |
| Thickness | 50 mm |
| Inner diameter | 12 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
| Weight | 0.100 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.53
Important compatibility info
| Spanner Size | 29 |
| Number of Connectors / Ports | 2 |
| Switch Point | 100 °C. 95 °C |
| Function | Temperature Switch, radiator fan |
| Weight | 0.055 kg |
| External Thread Size | M22 x 1,5 |
| Type | Temperature Switch, radiator fan |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Weight | 0.074 kg |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 106319 |
| Number of Connectors / Ports | 2 |
| Cable Length | 855 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.93
Important compatibility info
| Additional Information | with oil supply line |
| Additional Information 2 | with mounting kit |
| Weight | 10.0 kg |
| Charge Type | Exhaust Turbocharger |
| Type | Charger, charging (supercharged/turbocharged) |
| Function | Charger, charging (supercharged/turbocharged) |
| Extra Description | Garrett Turbo ProKit REMAN |
| Manufacturer | Garrett |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Charger, charging (supercharged/turbocharged) (186712)
- 1x Febi Mounting Kit, charger (187913)
- 1x Febi Oil Line, charger (187914)
£672.30
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 1.076 kg |
| Width | 62 mm |
| Outer diameter | 100 mm |
| Inner diameter | 55 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing |
| Function | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£159.13
Important compatibility info
| Function | Mounting, manual transmission |
| Type | Mounting, manual transmission |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Weight | 2.167 kg |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.70
Important compatibility info
| Pipe Diameter | 63.5 mm. 55 mm |
| Mounting points diameter | 20 mm |
| Type | Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Min. Length | 495 mm |
| Max. Length | 846 mm |
| Piston Diameter | 14 mm |
| Function | Shock Absorber |
| Weight | 4.5 kg |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Front Axle |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£278.16
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Rated Power | 180 W |
| Weight | 1.0 kg |
| for OE number | 77365525 |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.05
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Pneumatic |
| Weight | 1.3 kg |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 352 mm |
| Min. Length | 253 mm |
| Piston Diameter | 12 mm |
| Pipe Diameter | 45 mm. 62 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.23
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| External Thread Size | M14 x 1,5 |
| Cone Size 2 | 18 mm |
| Cone Size | 15 mm |
| Weight | 2.786 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 181824 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.23
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 165 mm |
| Additional Information 2 | with crown nut |
| Spanner Size | 21 |
| Paired article numbers | 197419 |
| Weight | 0.396 kg |
| Type | Tie Rod End |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,25 |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.29
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 182162 |
| Cone Size | 26 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 5.442 kg |
| Steering arm type | Control Arm |
| Cone Size 1 | 21 mm |
| Placement on Vehicle | Front Axle Right |
| Material | Sheet Steel |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.95
Important compatibility info
| Spanner Size | E14 |
| Thread Length | 85 mm |
| Bolt Head/Nut Design | Male Torx |
| Function | Cylinder Head Bolt |
| Screw length below head | 124 mm |
| Length | 136 mm |
| Weight | 0.113 kg |
| External Thread Size | M12 x 1,5 |
| Number of screws | 10 |
| Type | Cylinder Head Bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.34
Important compatibility info
| Wear Warning Contact | prepared for wear warning indicator |
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 17.8 mm |
| Inspection Tag | ECE R90 Approved |
| Brake System | Bosch |
| Width | 52.8 mm |
| Length | 105 mm |
| Placement on Vehicle | Rear Axle |
| Type | Brake Pad Set, disc brake |
| Weight | 0.902 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.71
Important compatibility info
| Weight | 0.266 kg |
| Material | Metal |
| Outer diameter | 80 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 31 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.41
Important compatibility info
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Weight | 1.618 kg |
| Number of Teeth | 42. 70 |
| Placement on Vehicle | Intake Side, Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£176.14
Important compatibility info
| Additional Information 2 | with clamp |
| Placement on Vehicle | Charge Air Cooler |
| Turbocharger line | Turbocharger to charge air cooler |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
| Outer diameter 2 | 66 mm |
| Weight | 0.591 kg |
| Outer diameter 1 | 62 mm |
| Material | AEM (Ethylene Acrylate Rubber) |
| Inner diameter 2 | 56 mm |
| Inner diameter 1 | 52 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.55
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023