Important compatibility info
Belts | with rounded tooth profile |
Weight | 0.648 kg |
Width | 25.4 mm |
Number of Teeth | 116 |
Type | Timing Belt Kit |
Function | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (37290)
- 1x Febi Tensioner Pulley, timing belt (37353)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (26816)
- 1x Febi Nut (37867)
Important compatibility info
Weight | 0.040 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 490 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Compressor, air conditioning |
Type | Compressor, air conditioning |
Number of grooves | 8 |
Oil Fill Quantity | 175 ml |
Belt Pulley Diameter | 136 mm |
Voltage | 24 V |
Pulleys | with belt pulley |
Weight | 8.5 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.380 kg |
Placement on Vehicle | Front Axle, transmission sided |
Length | 98 mm |
Material | Thermoplast |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Inner diameter 1 | 27 mm |
Inner diameter 2 | 86 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (38818)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (38765)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Replaces | 44598 |
Suction side external thread size | M12 x 1,5 |
External Thread Size | M14 x 1,5 |
Pressure side external thread size | M14 x 1,5 |
Function | Tilt Pump, driver cab |
Type | Tilt Pump, driver cab |
Weight | 3.0 kg |
Number of Connectors / Ports | 3 |
Operating Mode | Manual |
Hole Spacing | 95 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Replaces | 109219 |
Weight | 0.285 kg |
Length | 290 mm |
Height | 41 mm |
Width | 207 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.057 kg |
Function | Control Valve, camshaft adjustment |
Extra Description | febi Plus |
Type | Control Valve, camshaft adjustment |
for OE number | 06H 109 257 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 22 |
Weight | 0.120 kg |
Cable Length | 800 mm |
Number of circuits | 4 |
Lambda Sensor | Heated, Regulating Sensor |
Type | Oxygen Sensor |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 33 mm |
Outer diameter | 76 mm |
Operating Mode | Automatic |
Type | Belt Tensioner, v-ribbed belt |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Metal |
Weight | 1.78 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 146 mm |
Width | 67.7 mm. 57.7 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Thickness/Strength 1 | 17.1 mm |
Weight | 2.083 kg |
Inspection Tag | ECE R90 Approved |
Wear Warning Contact | prepared for wear warning indicator |
Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 440 mm |
Weight | 0.105 kg |
Type | Brake Hose |
Function | Brake Hose |
External Thread Size | M10 x 1 |
Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with nuts, with rubber mounts |
External Thread Size | M12 x 1,5 |
Placement on Vehicle | Front Axle Left, outer, Front Axle Right |
Length | 98 mm |
Diameter | 1 mm |
Material | Steel |
Thickness | 30 mm |
Additional Information 2 | with washers |
Spanner Size | 15 |
Rod/Strut | Coupling Rod |
Thread Length | 17.5 mm |
Weight | 0.308 kg |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.24 kg |
Length | 206 mm |
Height | 80 mm |
Width | 170 mm |
Additional Information 2 | with pre-filter |
Filter type | Filter Insert |
Function | Air Filter |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.015 kg |
Length | 227 mm. 81 mm |
Paired article numbers | 33406 |
Brake Type | Disc Brake |
Type | Warning Contact, brake pad wear |
Function | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Electric-pneumatic |
Number of Connectors / Ports | 2 |
Function | Pressure Converter |
Weight | 0.15 kg |
Extra Description | febi Plus |
Type | Pressure Converter |
for OE number | 46524556 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Slave Cylinder, power steering |
Extra Description | ProKit |
Piston conrod diameter | 28 mm |
Type | Slave Cylinder, power steering |
Outer diameter | 70 mm |
Length | 900 mm |
Stroke | 200 mm |
Min. Length | 900 mm |
Cone Size | 30 mm |
Max. Length | 1100 mm |
Placement on Vehicle | Rear Axle |
Weight | 15.170 kg |
External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.493 kg |
Placement on Vehicle | Front Axle Left, Front, Front Axle Right |
Outer diameter | 74 mm. 30 mm |
Thickness | 60 mm |
Inner diameter | 14 mm |
Material | Rubber/Metal |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.463 kg |
Function | Hydraulic Hose, steering |
Internal Thread Size | M14 x 1,5 |
External Thread Size | M16 x 1,5 |
Type | Hydraulic Hose, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.442 kg |
External Thread Size | M14 x 1,5 |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Inner diameter | 12 mm |
Material | Cast Steel |
Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing, with ball joint |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Material | Sheet Steel |
Steering arm type | Control Arm |
Cone Size | 17 mm |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Weight | 2.973 kg |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (06524)
- 1x Febi Holder, control arm mounting (06634)
- 1x Febi Ball Joint (04453)
- 1x Febi Mounting, control/trailing arm (06559)
- 1x Febi Mounting, control/trailing arm (06561)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (196336)
Important compatibility info
Length | 423 mm |
Function | Gasket, oil filter housing |
Weight | 0.201 kg |
Type | Gasket, oil filter housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M12 x 1,5 |
Rims | for steel rims |
Bolt Head/Nut Design | Male Hex |
Material | Steel |
Function | Wheel Nut |
Wheel Fastening | Conical Seat F |
Quality/ Grade | 10 |
Surface | Zink-nickel coated |
Spanner Size | 19 |
Thickness | 15 mm |
Placement on Vehicle | Front Axle, Rear Axle |
Weight | 0.022 kg |
Type | Wheel Nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 04944 |
Cone Size | 14.6 mm |
Mounting points diameter | 8.5 mm |
Weight | 0.360 kg |
External Thread Size | M10 x 1 |
Function | Ball Joint |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.155 kg |
Material | Plastic |
Outer diameter | 65 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 26 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
for OE number | 651 200 02 70 |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 24 V |
Bore Diameter | 8 mm |
Number of Connectors / Ports | 2 |
Weight | 0.57 kg |
Type | Solenoid Valve |
Function | Solenoid Valve |
Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Stroke | 405 mm |
Mounting points diameter | 20 mm |
Function | Tilt Cylinder, driver cab |
Pressure side external thread size | M12 x 1,5 |
Length | 559 mm |
Outer diameter | 45 mm |
Number of Connectors / Ports | 2 |
Suction side external thread size | M12 x 1,5 |
Weight | 9.9 kg |
Type | Tilt Cylinder, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 4 |
Weight | 0.233 kg |
Type | Steering Column Switch / Switch, engine brake |
Function | Steering Column Switch / Switch, engine brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 24 V |
Weight | 0.1 kg |
Type | Repair Kit, air dryer |
Function | Repair Kit, air dryer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.202 kg |
Length | 60 mm |
Material | Rubber/Metal |
Outer diameter | 50 mm |
Inner diameter | 12 mm |
Placement on Vehicle | Front Axle Left, Lower, Front, inner, Front Axle Right |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with pre-filter |
Length | 240 mm |
Height | 49 mm |
Width | 205 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Weight | 0.20 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Aluminium |
Outer diameter | 22 mm |
Steering arm type | Control Arm |
Paired article numbers | 21198 |
Weight | 1.74 kg |
Placement on Vehicle | Front Axle Left, Lower, Rear |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (21194)
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Number of Holes | 4 |
Thickness | 72 mm |
Inner diameter | 24.2 mm |
Outer diameter | 125 mm |
Bolt Hole Circle Diameter | 100 mm |
Function | Wheel Hub |
Weight | 1.12 kg |
Type | Wheel Hub |
Additional Information 2 | without wheel bearing |
Width | 72 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.07 kg |
Placement on Vehicle | Front Axle |
Length | 79 mm |
Width | 64 mm |
Material | PU (Polyurethane) |
Function | Rubber Buffer, suspension |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Pipe, charger |
Weight | 0.12 kg |
Extra Description | febi Plus |
Type | Oil Pipe, charger |
Forward- /Backflow | Supply Line |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.250 kg |
Placement on Vehicle | Left |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, automatic transmission |
Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Steel |
Steering arm type | Control Arm |
Rod/Strut | Guide Rod |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Weight | 0.480 kg |
Function | Rod/Strut, wheel suspension |
Type | Rod/Strut, wheel suspension |
Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.055 kg |
Type | Mount, exhaust system |
Function | Mount, exhaust system |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 33220-80G00 |
Weight | 0.1 kg |
Number of Connectors / Ports | 3 |
Function | Sensor, crankshaft pulse |
Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Internally Vented |
Rim Hole Number | 5 -Hole |
Weight | 8.480 kg |
Placement on Vehicle | Front Axle |
Outer diameter | 302 mm |
Thickness | 38 mm |
Brake Disc Thickness | 28 mm |
Minimum thickness | 26.5 mm |
Bolt Hole Circle Diameter | 127 mm |
Centering Diameter | 73 mm |
Surface | Coated |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Parameter | Typ 20 |
Stroke | 64 mm |
Weight | 2.97 kg |
Brake Type | Disc Brake |
Internal Thread Size | M16 x 1,5 |
Function | Diaphragm Brake Cylinder |
Distance of fastening bolts | 120 mm |
Piston Rod Length | 15 mm |
Type | Diaphragm Brake Cylinder |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Steering arm type | Control Arm |
Paired article numbers | 109051 |
Additional Information | with rubber mounts |
Function | Control/Trailing Arm, wheel suspension |
Weight | 8.04 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 133 mm |
Width | 56 mm |
Material | Rubber/Metal |
Weight | 0.750 kg |
Type | Rubber Buffer, suspension |
Function | Rubber Buffer, suspension |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Placement on Vehicle | Left |
Weight | 0.896 kg |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front, Front Axle Left, Lower, Front Axle Right |
Length | 54 mm |
Material | Rubber/Metal |
Outer diameter | 34 mm |
Inner diameter | 12 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Weight | 0.108 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 90 mm |
Weight | 0.241 kg |
Height | 70 mm |
Function | Charge Air Hose |
Type | Charge Air Hose |
Placement on Vehicle | Right |
Additional Information 2 | with quick couplers |
Hose Length | 200 mm |
Wall Thickness | 4.5 mm |
Turbocharger line | Turbocharger to piping |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 5.5 mm. 7 mm |
Outer diameter | 42 mm |
Inner diameter | 28 mm |
Function | Shaft Seal, automatic transmission |
Weight | 0.008 kg |
Type | Shaft Seal, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.360 kg |
Length | 135 mm |
Placement on Vehicle | Front Axle |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Width | 52.5 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with brake caliper screws, with anti-squeak plate, with fastening material |
Weight | 1.22 kg |
Placement on Vehicle | Rear Axle |
Length | 115.6 mm |
Width | 49.5 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.2 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.120 kg |
Function | Filter, cabin air |
Type | Filter, cabin air |
Filter type | with antibacterial action |
Length | 209 mm |
Width | 203 mm |
Height | 35 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Wheel Bolt |
Wheel Fastening | Conical Seat F |
Quality/ Grade | 8.8 |
Thread Length | 20 mm |
Surface | Chromed |
Spanner Size | 17, 19 |
Length | 50 mm |
Placement on Vehicle | Front Axle, Rear Axle |
Weight | 0.450 kg |
Screw length below head | 23 mm |
Material | Steel |
External Thread Size | M12 x 1,5 |
Type | Wheel Bolt |
Lockable | Lockable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023