Proud to be a UK-based company
Contact us
Important compatibility info
| Additional Information | with gasket/seal |
| Weight | 0.355 kg |
| Function | Hydraulic Filter Kit, automatic transmission |
| Type | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Hydraulic Filter, automatic transmission (21023)
- 1x Febi Gasket, automatic transmission oil sump (43663)
£23.59
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Function | Gasket, automatic transmission oil sump |
| Colour | Black |
| Weight | 0.105 kg |
| Type | Gasket, automatic transmission oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.25
Important compatibility info
| Type | Wheel Brake Cylinder |
| Function | Wheel Brake Cylinder |
| Piston Diameter | 20.6 mm |
| Material | Aluminium |
| Weight | 0.180 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.96
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 25 |
| Weight | 7.231 kg |
| External Teeth, Diff.Side | 26 |
| Min. Length | 703 mm |
| Wheel Sided Joint Diameter | 88 mm |
| Transmission-side joint diameter | 85 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.47
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 52 |
| Function | Chain Kit, oil pump drive |
| Weight | 0.41 kg |
| Type | Chain Kit, oil pump drive |
| Timing Chain Size | G53HR, G53HP |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (32545)
- 1x Febi Sprocket, crankshaft (30477)
- 1x Febi Sprocket/Gear, oil pump (48335)
- 1x Febi Screw (48337)
- 1x Febi Centering Bolt, crankshaft pulley (33618)
£46.32
Important compatibility info
| Weight | 8.30 kg |
| Voltage | 24 V |
| Number of Teeth | 10 |
| Rated Power | 4 kW |
| Function | Starter |
| Type | Starter |
| for OE number | 58 0157 7135 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£200.47
Important compatibility info
| for OE number | 272 052 13 16 |
| Weight | 0.175 kg |
| Engine Management | Timing Chain |
| Type | Guide, timing chain |
| Function | Guide, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.18
Important compatibility info
| Outer diameter 2 | 75 mm |
| Function | Charge Air Hose |
| Inner diameter 1 | 55 mm |
| Inner diameter 2 | 65 mm |
| Outer diameter 1 | 65 mm |
| Weight | 0.23 kg |
| Type | Charge Air Hose |
| Placement on Vehicle | Charge Air Cooler |
| Turbocharger line | Charge air cooler to intake manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.40
Important compatibility info
| Material | Thermoplast |
| Function | Bellow Kit, drive shaft |
| Placement on Vehicle | Front Axle, Wheel Side |
| Inner diameter 2 | 92 mm |
| Length | 129 mm |
| Weight | 0.282 kg |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (49876)
- 1x Febi Clamping Clip (29820)
- 1x Febi Clamping Clip (45645)
- 2x Febi Molybdenum Grease (02582)
£16.41
Important compatibility info
| Placement on Vehicle | Upper |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Inner diameter | 26 mm |
| Weight | 0.164 kg |
| Cooling Hose | from engine to engine cooler |
| Type | Radiator Hose |
| Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.75
Important compatibility info
| Length | 141 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M14 x 1,5, M16 x 1,5 |
| Function | Inner Tie Rod |
| Weight | 0.330 kg |
| Additional Information | with counter nut |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.55
Important compatibility info
| Length | 90 mm |
| Material | Rubber/Metal |
| Outer diameter | 69 mm |
| Inner diameter | 12 mm |
| Bearing/Mounting Type | Hydro Mount |
| Weight | 0.38 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.12
Important compatibility info
| Function | Expansion Tank, coolant |
| Length | 224 mm |
| Height | 250 mm |
| Additional Information | with coolant level sensor |
| Opening Pressure | 1 bar |
| Width | 233 mm |
| Extra Description | ProKit |
| Type | Expansion Tank, coolant |
| Weight | 0.8 kg |
| Fill quantity | 3.3 l |
| Additional Information 2 | with lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Expansion Tank, coolant (100577)
- 1x Febi Sensor, coolant level (101422)
- 1x Febi Cap, coolant tank (101420)
£100.72
Important compatibility info
| Function | Camshaft |
| Type | Camshaft |
| Weight | 2.0 kg |
| Placement on Vehicle | Exhaust Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.24
Important compatibility info
| Inner diameter | 27 mm |
| Width | 136 mm |
| Outer diameter | 81 mm |
| Additional Information | with fastening/mounting material |
| Bearing Type | Angular Ball Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Weight | 4.14 kg |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.44
Important compatibility info
| Weight | 0.113 kg |
| Length | 300 mm |
| Material | Rubber |
| Thickness | 15 mm |
| Type | Gasket, cylinder head cover |
| Function | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.13
Important compatibility info
| Width | 147 mm |
| Inner diameter | 22 mm |
| Bearing Type | Angular Ball Bearing |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 3.36 kg |
| Function | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Outer diameter | 90 mm |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.41
Important compatibility info
| Weight | 0.32 kg |
| Extra Description | ProKit |
| Height | 47 mm |
| Width | 160 mm |
| Rated Power | 18 W |
| Light Design | LED |
| Mounting Type | Fully assembled |
| Cable Length | 1500 mm |
| Depth | 64 mm |
| Voltage from | 9 V |
| Light Distribution | Long-range illumination |
| Voltage to | 32 V |
| Protection Type (IP Code) | IP6K9K |
| Fulfils ECE norm | R10 |
| Lumen | 1800 lm |
| Temperature range from | -40 °C |
| Temperature range to | 60 °C |
| Function | Worklight |
| Housing material | Aluminium |
| Inspection Tag | EMC |
| Type | Worklight |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.60
Important compatibility info
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Material | Steel |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 183 mm |
| Diameter | 1 mm |
| Weight | 0.306 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.73
Important compatibility info
| Piston Diameter | 20.6 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Aluminium |
| Type | Wheel Brake Cylinder |
| Function | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.84
Important compatibility info
| Material | Cast Aluminium |
| Number of Wings | 9 |
| Water pump impeller material | Metal |
| Weight | 1.766 kg |
| Function | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Height | 125 mm |
| Weight | 0.038 kg |
| Outer diameter | 64 mm |
| Inner diameter | 32 mm |
| Filter type | Filter Insert |
| Seal Diameter | 69 mm |
| Type | Oil Filter |
| Function | Oil Filter |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.31
Important compatibility info
| Width | 45 mm |
| Outer diameter | 55 mm |
| Weight | 0.650 kg |
| Additional Information 2 | with retaining ring |
| Inner diameter | 25 mm |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Wheel Bearing Kit |
| Bearing Type | Tapered Roller Bearing |
| Dust Cover | with dust cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.64
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 0.022 kg |
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
| Thickness | 32 mm |
| Width | 35 mm |
| Length | 32 mm |
| Material | Rubber |
| Inner diameter | 17 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.03
Important compatibility info
| Outer diameter | 53 mm |
| Inner diameter | 21 mm |
| Filter type | Filter Insert |
| Seal Diameter | 59 mm |
| Height | 112 mm |
| Function | Oil Filter |
| Weight | 0.052 kg |
| Replaces | 100489 |
| Additional Information 2 | with seal ring |
| Type | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.47
Important compatibility info
| Placement on Vehicle | Intake Side |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| for OE number | 48 05 108 |
| Number of Teeth | 46 |
| Extra Description | febi Plus |
| Weight | 1.120 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.37
Important compatibility info
| Material | Plastic |
| Function | Mass Air Flow Sensor |
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-film Sensor |
| Weight | 0.14 kg |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
| for OE number | 1920.GG |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.08
Important compatibility info
| Additional Information 2 | with anti-squeak plate |
| Weight | 0.898 kg |
| Placement on Vehicle | Rear Axle |
| Length | 123.2 mm |
| Width | 51.6 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.2 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.54
Important compatibility info
| Weight | 0.37 kg |
| Outer diameter | 84.955 mm |
| Type | Piston, air compressor |
| Function | Piston, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Additional Information | with counter nut |
| Spanner Size | 21 |
| Paired article numbers | 109576 |
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle Left |
| Length | 195 mm |
| Extra Description | ProKit |
| Internal Thread Size | M14 x 1,5 |
| Weight | 0.915 kg |
| Type | Tie Rod End |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.01
Important compatibility info
| Additional Information | with seal |
| Weight | 0.754 kg |
| Type | EGR Valve |
| Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.26
Important compatibility info
| for OE number | 51813198 |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right |
| Weight | 1.200 kg |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.71
Important compatibility info
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Number of Chain Links | 132 |
| Chain Type | Duplex, Closed chain |
| for OE number | 1 099 874 S7 |
| Weight | 2.957 kg |
| Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (36295)
- 1x Febi Tensioner, timing chain (36296)
- 1x Febi Guide, timing chain (40151)
- 1x Febi Guide, timing chain (46256)
- 1x Febi Guide, timing chain (102199)
- 2x Febi Gear/Sprocket, camshaft (102200)
- 1x Febi Guide, timing chain (102201)
£186.85
Important compatibility info
| Function | Thermostat, coolant |
| Weight | 0.284 kg |
| Additional Information | with gasket/seal |
| Opening Temperature | 92 °C |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.50
Important compatibility info
| Weight | 0.45 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 120 mm |
| Material | Rubber/Metal |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (19495)
- 1x Febi Rolling Bearing, suspension strut support mount (10091)
£15.80
Important compatibility info
| Weight | 1.470 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 50 mm |
| Outer diameter | 98 mm |
| Inner diameter | 54 mm |
| Function | Wheel Bearing |
| Type | Wheel Bearing |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.42
Important compatibility info
| Hose Length | 260 mm |
| Type | Charge Air Hose |
| Function | Charge Air Hose |
| Height | 75 mm |
| Inner diameter | 63 mm |
| Turbocharger line | Turbocharger to Inlet Manifold |
| Width | 120 mm |
| Weight | 0.394 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.31
Important compatibility info
| Function | Air Filter |
| Height | 525 mm |
| Outer diameter | 303 mm |
| Weight | 3.33 kg |
| Inner diameter | 167 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| for OE number | 1 869 992 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.88
Important compatibility info
| Function | Gasket, thermostat housing |
| Type | Gasket, thermostat housing |
| Material | Silicone |
| Thickness | 5.5 mm |
| Width | 160 mm |
| Weight | 0.012 kg |
| Length | 117 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.81
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 4 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 75 A |
| Belt Pulley Diameter | 55 mm |
| Weight | 6.5 kg |
| Current Strength | 75 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.46
Important compatibility info
| Function | Repair Kit, suspension strut support mount |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Inner diameter | 13 mm |
| Material | Rubber/Metal |
| Weight | 0.946 kg |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (171380)
- 1x Febi Rolling Bearing, suspension strut support mount (30841)
£30.58
Important compatibility info
| Function | Tensioner Lever, v-ribbed belt |
| Weight | 0.343 kg |
| Type | Tensioner Lever, v-ribbed belt |
| for OE number | 442 200 07 73 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.19
Important compatibility info
| Paired article numbers | 171797 |
| Type | Coiled Cable |
| Material | PU (Polyurethane) |
| Function | Coiled Cable |
| Working length | 3 m |
| Number of Connectors / Ports | 7 |
| DIN / ISO | 1185 - Typ N |
| Voltage | 24 V |
| Version | OE Standard |
| Additional Information 2 | with plug |
| Weight | 0.916 kg |
| Connecting plug material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Weight | 0.688 kg |
| Type | Adjuster Rod, brake caliper |
| Placement on Vehicle | Front Axle, Rear Axle |
| Function | Adjuster Rod, brake caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.23
Important compatibility info
| Weight | 1.6 kg |
| Outer diameter | 73 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.94
Important compatibility info
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Weight | 0.272 kg |
| Number of Ribs | 9 |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1780 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.15
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 9.86 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 345 mm |
| Thickness | 66.3 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 22.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| for OE number | 34 20 6 797 605 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.08
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with bolts/screws |
| Thread Size | M16x1,5 |
| Bolt Hole Circle Diameter | 94 mm |
| Bore Diameter | 10.5 mm |
| External Teeth, Wheel Side | 36 |
| Weight | 8.562 kg |
| Number of mounting bores | 6 |
| Min. Length | 669 mm |
| Wheel Sided Joint Diameter | 103 mm |
| Transmission-side joint diameter | 107.8 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.70
Important compatibility info
| Weight | 3.450 kg |
| Width of castor bearing surface | 40 mm |
| Housing material | Aluminium |
| Function | V-Ribbed Belt Set |
| Track rollers material | Metal |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt Set |
| Additional Information 2 | with tensioner element |
| Number of Ribs | 9 |
| Length | 1358 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (48449)
- 1x Febi Belt Tensioner, v-ribbed belt (40128)
£283.63
Important compatibility info
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Material | Metal |
| Outer diameter | 70 mm |
| Inner diameter | 10 mm |
| Weight | 0.261 kg |
| Mounting points diameter | 10 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.05
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023