Proud to be a UK-based company
Contact us
Important compatibility info
| Width | 139 mm |
| Function | Oil Cooler, engine oil |
| Height | 134 mm |
| Length | 160 mm |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.09
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Placement on Vehicle | Rear Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 182082 |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.09
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information | with rubber mounts |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 193293 |
| Cone Size | 20 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.09
Important compatibility info
| Material | Sheet Steel |
| Placement on Vehicle | Rear Axle Left, Lower |
| Steering arm type | Control Arm |
| Paired article numbers | 182083 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.09
Important compatibility info
| Number of Connectors / Ports | 10 |
| Function | Steering Angle Sensor |
| Voltage | 12 V |
| Type | Steering Angle Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.13
Important compatibility info
| Placement on Vehicle | Right, Centre |
| Type | Roller Guide, sliding door |
| Function | Roller Guide, sliding door |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.13
Important compatibility info
| Additional Information 2 | without sensor |
| Length | 179 mm |
| Height | 152 mm |
| Extra Description | febi Plus |
| Type | Housing, oil filter |
| Function | Housing, oil filter |
| Additional Information | with gasket/seal, with oil filter |
| Width | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.13
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Bellow, air suspension |
| Rolling piston material | Plastic |
| Thickness | 171 mm. 380 mm |
| Outer diameter | 258 mm. 290 mm |
| External Thread Size | M22 x 1,5, M12 x 1,75 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.14
Important compatibility info
| Material | Cast Aluminium |
| Number of Connectors / Ports | 2 |
| Opening Temperature | 90 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal, with temperature sensor |
| for OE number | 31293699 |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.15
Important compatibility info
| Paired article numbers | 34286 |
| Additional Information | with lock nut, with rubber mounts |
| Placement on Vehicle | Upper Front Axle, Left |
| Steering arm type | Triangular Control Arm (CV) |
| Cone Size | 12.5 mm |
| Material | Aluminium |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Cone Size 2 | 14.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.17
Important compatibility info
| Housing material | Grey Cast Iron |
| Additional Information | with gasket/seal |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
| for OE number | 25100-2E000 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.18
Important compatibility info
| Function | Oil Pump |
| Type | Oil Pump |
| for OE number | 1001.G8 |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.18
Important compatibility info
| Brake caliper piston diameter | 38 mm |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 181559 |
| Material | Cast Aluminium |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.22
Important compatibility info
| Number of Connectors / Ports | 9 |
| Extra Description | febi Plus |
| for OE number | 55271957 |
| Type | Control Unit, glow time |
| Function | Control Unit, glow time |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.22
Important compatibility info
| Rotor Style | perforated/vented |
| Minimum thickness | 26 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 312 mm |
| Thickness | 76 mm |
| Brake Disc Thickness | 28 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.23
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 296 mm |
| Thickness | 51.5 mm |
| Brake Disc Thickness | 32 mm |
| Minimum thickness | 30 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62.1 mm |
| Surface | Coated |
| Number of mounting bores | 12 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.23
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.23
Important compatibility info
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Inner length 1 | 975 mm |
| Inner length 2 | 1000 mm |
| Outer length 1 | 1265 mm |
| Outer length 2 | 1323 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.23
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| for OE number | 5WA 199 262 D |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.25
Important compatibility info
| Placement on Vehicle | Left Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.26
Important compatibility info
| Additional Information 2 | with bolts/screws, with washers |
| Outer diameter | 132 mm |
| Placement on Vehicle | Front |
| Bolt Hole Circle Diameter | 90 mm |
| Inner diameter | 37 mm |
| Thickness | 24 mm |
| Function | Joint, propshaft |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| Number of Holes | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (01976)
- 3x Febi Screw (03931)
- 3x Febi Screw (09110)
- 1x Febi Assembly Kit, propshaft joint (22117)
£70.28
Important compatibility info
| Additional Information | with rubber mounts |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Camber correction | -0.5 ° |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.28
Important compatibility info
| Thread Size | M20x1,5 |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Left |
| External Teeth, Wheel Side | 23 |
| External Teeth, Diff.Side | 25 |
| Min. Length | 650 mm |
| Wheel Sided Joint Diameter | 79 mm |
| Transmission-side joint diameter | 74.2 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.28
Important compatibility info
| Additional Information 2 | with screw |
| Width of castor bearing surface | 30 mm |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| for OE number | 11 28 7 582 946 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.30
Important compatibility info
| for OE number | 1813.L5 |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.31
Important compatibility info
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| Paired article numbers | 104988 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.31
Important compatibility info
| Number of Teeth | 135 |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (23644)
- 1x Febi Water Pump, engine cooling (18124)
£70.32
Important compatibility info
| Port / Connector type | - |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 200 mm. 155 mm |
| Thickness | 295 mm. 155 mm |
| Function | Bellow, air suspension |
| External Thread Size | M16 x 1,5 |
| for OE number | 942 320 01 21 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.33
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 600 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.34
Important compatibility info
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Bolt Hole Circle Diameter | 112 mm |
| Thickness | 42.2 mm |
| Outer diameter | 335 mm |
| Placement on Vehicle | Rear Axle |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.35
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 32 mm |
| Outer diameter | 180 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Function | Brake Shoe Set |
| Piston Diameter | 20.6 mm |
| Type | Brake Shoe Set |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.42
Important compatibility info
| Additional Information 2 | with seal ring |
| Number of Connectors / Ports | 2 |
| for OE number | 009 542 16 18 |
| Type | Sender Unit, fuel tank |
| Function | Sender Unit, fuel tank |
| Screw length below head | 455 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.43
Important compatibility info
| Function | Cable Pull, manual transmission |
| Inner length 2 | 857 mm |
| Outer length 1 | 1235 mm |
| Inner length 1 | 940 mm |
| Type | Cable Pull, manual transmission |
| Outer length 2 | 1132 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.45
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, manual transmission |
| Function | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.45
Important compatibility info
| Capacity | 15 l |
| Number of Connectors / Ports | 2 |
| Internal Thread Size | M22 x 1,5 |
| Outer diameter | 206 mm |
| Operating Pressure | 14.5 bar |
| Type | Air Tank, compressed-air system |
| Material | Steel |
| Length | 513 mm |
| Function | Air Tank, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.45
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Paired article numbers | 170569 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.47
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower, Rear |
| Material | Cast Steel |
| Inner diameter | 14 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 44981 |
| Cone Size | 26.8 mm. 23.2 mm |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M14 x 1,5 |
| Additional Information 2 | with rubber mount, with ball joint |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.47
Important compatibility info
| Function | Mounting Bracket, shock absorber mounting (driver cab) |
| Type | Mounting Bracket, shock absorber mounting (driver cab) |
| Internal Thread Size | M6 x 1, M14 x 1,5 |
| Width | 75 mm |
| Length | 166 mm |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.50
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Rear |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 40854 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (40821)
- 1x Febi Ball Joint (40845)
- 1x Febi Nut (34653)
- 1x Febi Bolt, control arm (40852)
£70.51
Important compatibility info
| Function | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Outer diameter | 102 mm |
| Width | 40.5 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Inner diameter | 61 mm |
| Additional Information 2 | with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| Replaces | 49540 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.51
Important compatibility info
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Width of castor bearing surface | 30.5 mm |
| for OE number | 31170-RNA-A02 |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.52
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.52
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 43039 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.53
Important compatibility info
| Placement on Vehicle | Rear |
| Number of Connectors / Ports | 3 |
| Function | Wiper Motor |
| Voltage | 12 V |
| External Thread Size | M8 x 1,25 |
| Type | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.55
Important compatibility info
| Number of Chain Links | 170 |
| Function | Timing Chain |
| Placement on Vehicle | Upper |
| Chain Type | Silent Chain, Closed chain |
| Additional Information 2 | Requires special tools for mounting |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.55
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 39980 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| External Thread Size | M16 x 1,5 |
| Additional Information 2 | with bearing, with ball joint |
| Cone Size | 19 mm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (39977)
- 1x Febi Nut (39976)
£70.56
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | both sides |
| for OE number | 967 241 02 13 |
| External Thread Size | M18 x 1,5 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.56
Important compatibility info
| Height | 350 mm |
| Outer diameter | 136 mm |
| Inner diameter | 40 mm |
| Function | Oil Filter |
| External Thread Size | M125 x 4 |
| Type | Oil Filter |
| Filter type | Filter Insert |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.56
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 300 mm |
| Thickness | 51 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26.5 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.6 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.56
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | slotted/perforated, internally vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 350 mm |
| Thickness | 51 mm |
| Brake Disc Thickness | 32 mm |
| Minimum thickness | 30 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.56
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023