Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 26 |
| External Teeth, Diff.Side | 20 |
| Min. Length | 650 mm |
| ABS Ring Diameter | 80 mm |
| Wheel Sided Joint Diameter | 83 mm |
| Transmission-side joint diameter | 79 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.84
Important compatibility info
| Additional Information | with gaskets/seals |
| Type | EGR Valve |
| Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.86
Important compatibility info
| Width | 139 mm |
| Function | Oil Cooler, engine oil |
| Height | 134 mm |
| Length | 160 mm |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.88
Important compatibility info
| Inner length 2 | 890 mm |
| Inner length 1 | 908 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Outer length 1 | 1218 mm |
| Outer length 2 | 1175 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.91
Important compatibility info
| Placement on Vehicle | Rear |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| Max. Length | 300 mm |
| Shock Absorber Mounting Type | Top eye, Bottom Yoke |
| Operating Mode | Mechanical |
| Min. Length | 210 mm |
| Pipe Diameter | 92 mm. 45 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 13 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.92
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 8 |
| Rated Power | 0.7 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.93
Important compatibility info
| Placement on Vehicle | Left |
| Material | Rubber/Metal, Aluminium |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 22 11 6 859 845 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.94
Important compatibility info
| Paired article numbers | 32046 |
| Placement on Vehicle | Left Rear |
| Length | 345 mm |
| Eject Force | 1550 N |
| Stroke | 87 mm |
| Housing Diameter | 31 mm |
| Piston conrod diameter | 10 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Mounting points diameter | 15.5 mm |
| Housing length | 208.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.95
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Placement on Vehicle | Front Axle, Rear Axle |
| Length | 249.3 mm |
| Width | 111.2 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 29 mm |
| Additional Information 2 | with fastening material |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.95
Important compatibility info
| Additional Information | with gasket/seal |
| Number of Connectors / Ports | 3 |
| Type | EGR Valve |
| Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.95
Important compatibility info
| Number of mounting bores | 6 |
| Thread Size | M16x1,5 |
| Bolt Hole Circle Diameter | 94 mm |
| Min. Length | 541 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Transmission-side joint diameter | 108 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| External Teeth, Wheel Side | 38 |
| Bore Diameter | 10.6 mm |
| Additional Information | with grease |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.95
Important compatibility info
| Outer diameter | 55 mm |
| Inner diameter | 17 mm |
| Number of Ribs | 8 |
| Function | Alternator Freewheel Clutch |
| Additional Information 2 | with lid |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.97
Important compatibility info
| Rotor Style | Internally Vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 325 mm |
| Thickness | 38 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 18 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 64.5 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.97
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left |
| Steering arm type | Triangular Control Arm (CV) |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 179405 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.99
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.00
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 16 mm |
| Paired article numbers | 185175 |
| Steering arm type | Control Arm |
| Material | Cast Steel |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.01
Important compatibility info
| Rolling piston material | Plastic |
| Function | Bellow, air suspension |
| Thickness | 280 mm. 685 mm |
| Outer diameter | 260 mm. 200 mm |
| External Thread Size | M22 x 1,5, M12 x 1,75, M16 x 2 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.01
Important compatibility info
| Wear Warning Contact | prepared for wear warning indicator |
| Placement on Vehicle | Rear Axle |
| Length | 207 mm |
| Width | 113.9 mm |
| Brake System | Knorr |
| Function | Brake Pad Set, disc brake |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 29.3 mm |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.03
Important compatibility info
| Function | Brake Drum |
| Type | Brake Drum |
| Rim Hole Number | 4 -Hole |
| Max.skimmed drum measure | 230.2 mm |
| Number of mounting bores | 2 |
| Centering Diameter | 63.5 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Inner diameter | 228.5 mm |
| Thickness | 63.7 mm |
| Outer diameter | 273 mm |
| Width | 49.5 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.03
Important compatibility info
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.04
Important compatibility info
| Combi Switch Function | with indicator function, with rear fog light function, with high beam function, with fog-lamp function |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.04
Important compatibility info
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Outer diameter | 65 mm |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Width of castor bearing surface | 26 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.04
Important compatibility info
| Function | Tensioner, timing belt |
| Type | Tensioner, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.04
Important compatibility info
| Outer diameter | 74 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Width of castor bearing surface | 34 mm |
| Type | Belt Tensioner, v-ribbed belt |
| for OE number | 906 200 20 70 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.04
Important compatibility info
| Thickness | 31.5 mm |
| Inner diameter | 13 mm |
| Number of Ribs | 6 |
| Parameter | 7PK |
| Outer diameter | 167 mm |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.04
Important compatibility info
| Function | Timing Chain Kit |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 96 |
| Type | Timing Chain Kit |
| for OE number | 06K 109 158 BS S4 |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (45953)
- 1x Febi Tensioner, timing chain (101796)
- 1x Febi Guide, timing chain (49533)
- 1x Febi Guide, timing chain (49534)
- 1x Febi Guide, timing chain (49535)
£70.04
Important compatibility info
| Width | 40 mm. 29 mm |
| Outer diameter | 166 mm. 152 mm |
| Inner diameter | 31 mm. 57 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.06
Important compatibility info
| Length | 460 mm |
| Outer diameter | 238 mm. 131 mm |
| Material | CR (chloroprene rubber) |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Additional Information | without piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.06
Important compatibility info
| Bolt Hole Circle Diameter | 175 mm |
| Surface | Coated |
| Function | Brake Disc |
| Minimum thickness | 28 mm |
| Number of Holes | 12 |
| Brake Disc Type | Internally Vented |
| Thickness | 119 mm |
| Brake Disc Thickness | 34 mm |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 330 mm |
| Internal Thread Size | M12 x 1,75 |
| Type | Brake Disc |
| Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.07
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| for OE number | 1S0 199 262 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.07
Important compatibility info
| Placement on Vehicle | Right |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 22 11 6 856 184 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.07
Important compatibility info
| Placement on Vehicle | Right Front |
| Additional Information | without electric motor |
| Operating Mode | Electric |
| Type | Window Regulator |
| Paired article numbers | 177821 |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.07
Important compatibility info
| Placement on Vehicle | Left Front |
| Operating Mode | Electric |
| Paired article numbers | 177819 |
| Type | Window Regulator |
| Function | Window Regulator |
| Additional Information | without electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.07
Important compatibility info
| Piston Diameter | 19.1 mm |
| Placement on Vehicle | Rear Axle |
| Width | 32 mm |
| Outer diameter | 180 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Function | Brake Shoe Set |
| Type | Brake Shoe Set |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Outer diameter | 86 mm |
| Width | 62 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| Inner diameter | 30 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Pipe Diameter | 42 mm |
| Additional Information | with nuts |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Length | 785 mm |
| Placement on Vehicle | Rear |
| Cone Size | 26 mm |
| Extra Description | ProKit |
| Rod/Strut | Push Rod |
| Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Type | Oil Cooler, automatic transmission |
| Function | Oil Cooler, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Outer diameter | 89 mm |
| Width | 48 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Inner diameter | 33 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Outer diameter 1 | 96 mm |
| Outer diameter 2 | 161 mm. 140 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (174797)
£70.08
Important compatibility info
| Placement on Vehicle | Lower Front Axle, Left |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 06793 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without bearing, with ball joint |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (08570)
- 1x Febi Ball Joint (08571)
£70.09
Important compatibility info
| Placement on Vehicle | Left Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.09
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 120 mm |
| Outer diameter | 120 mm |
| Inner diameter | 30 mm |
| Bolt Hole Circle Diameter | 98 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.09
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 145 mm. 49 mm |
| Number of Holes | 6 |
| Number of Teeth | 30 |
| Type | Wheel Hub |
| Function | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.09
Important compatibility info
| Assignment plan scheme number | 1 |
| Working length | 4.0 m |
| DIN / ISO | 12098, 1185, 3731 |
| Type | Adaptor, electric filament |
| Temperature range from | -40 °C |
| Material | PU (Polyurethane) |
| Voltage | 24 V |
| Additional Information 2 | with plug |
| Function | Adaptor, electric filament |
| Port / Connector type | 15 to 2x7 |
| Number of Connectors / Ports | 15. 7 |
| Version | Aftermarket |
| Connecting plug material | Plastic |
| Temperature range to | 85 °C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.09
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right |
| Number of Connectors / Ports | 6 |
| for OE number | 11 21 013 51R |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.09
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.09
Important compatibility info
| Placement on Vehicle | Left |
| Paired article numbers | 194828 |
| Bearing/Mounting Type | Vacuum controlled hydro mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.09
Important compatibility info
| Additional Information 2 | with dryer |
| Type | Condenser, air conditioning |
| Core Depth | 16 mm |
| Refrigerant | R 134a |
| Core Length | 461 mm |
| Core Width | 593 mm |
| Function | Condenser, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.09
Important compatibility info
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 328 mm |
| Min. Length | 167 mm |
| Pipe Diameter | 41.5 mm |
| Mounting points diameter | 12 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.12
Important compatibility info
| Function | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 91 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Inner diameter | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.12
Important compatibility info
| Number of Connectors / Ports | 10 |
| Function | Steering Angle Sensor |
| Voltage | 12 V |
| Type | Steering Angle Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.13
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023