Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 2.35 kg |
| Width | 20 mm. 16 mm |
| Material | Cast Steel |
| Outer diameter | 137 mm |
| Inner diameter | 25 mm |
| Number of Ribs | 7 |
| Parameter | 5PK + 4PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.98
Important compatibility info
| Additional Information | with gasket/seal, with nuts |
| Material | Aluminium |
| Inner diameter | 20.64 mm |
| Weight | 0.464 kg |
| Type | Brake Master Cylinder |
| Function | Brake Master Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.99
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Left |
| Weight | 1.340 kg |
| Type | Mounting, engine |
| Additional Information 2 | with splash protection cover |
| for OE number | 253 240 10 00 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.00
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 120 mm |
| Outer diameter | 120 mm |
| Inner diameter | 30 mm |
| Bolt Hole Circle Diameter | 98 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Weight | 2.0 kg |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.01
Important compatibility info
| Weight | 0.198 kg |
| Additional Information | with fastening/mounting material |
| Number of Connectors / Ports | 4 |
| Cable Length | 1350 mm |
| Function | Sensor, boost pressure |
| Type | Sensor, boost pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.01
Important compatibility info
| Additional Information 2 | with seal ring |
| Weight | 0.84 kg |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Number of Wings | 6 |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.02
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| Weight | 2.82 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Height | 104 mm |
| Outer diameter | 139 mm |
| Inner diameter | 38 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 118 mm |
| Type | Wheel Hub |
| Function | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.02
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right, Left |
| Weight | 1.48 kg |
| Type | Mounting, engine |
| Additional Information 2 | with splash protection cover |
| Replaces | 31079 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.02
Important compatibility info
| Weight | 1.19 kg |
| Number of Teeth | 136 |
| Function | Timing Belt Kit |
| Track rollers material | Metal |
| Type | Timing Belt Kit |
| Width | 26 mm |
| Belts | with trapezoidal tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (11000)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (06983)
- 1x Febi Tensioner Pulley, timing belt (04751)
£72.02
Important compatibility info
| Inner diameter | 25.4 mm |
| Function | Brake Master Cylinder |
| Weight | 0.595 kg |
| Material | Aluminium |
| Additional Information | with gasket/seal |
| Type | Brake Master Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.02
Important compatibility info
| Weight | 0.040 kg |
| Number of Connectors / Ports | 2 |
| Function | Sensor, camshaft position |
| Type | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.02
Important compatibility info
| Weight | 0.060 kg |
| Type | Sensor, speed |
| Function | Sensor, speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.04
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 308 mm |
| Thickness | 57.1 mm |
| Brake Disc Thickness | 16 mm |
| Minimum thickness | 14 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62 mm |
| Surface | Coated |
| Number of mounting bores | 3 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Weight | 6.460 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.05
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 44621 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 3.89 kg |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bolts/screws |
| Additional Information | with nuts, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (38701)
- 2x Febi Screw (44617)
- 2x Febi Nut (44618)
- 1x Febi Clamping Bolt, ball joint (17532)
- 1x Febi Nut (24361)
£72.06
Important compatibility info
| Weight | 4.6 kg |
| Brake Pad | without lining |
| Function | Brake Shoe |
| Width | 200 mm |
| Material | Steel |
| for OE number | 05.091.14.19.0 |
| Additional Information | with fastening/mounting material |
| Type | Brake Shoe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| Paired article numbers | 184797 |
| External Teeth, Wheel Side | 29 |
| Weight | 6.568 kg |
| External Teeth, Diff.Side | 26 |
| Min. Length | 692 mm |
| Wheel Sided Joint Diameter | 86.2 mm |
| Transmission-side joint diameter | 77 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Length | 501 mm |
| Colour | Black |
| Function | Oil sump |
| Wet Sump Material | Sheet Steel |
| Weight | 2.89 kg |
| Internal Thread Size | M12 x 1,5 |
| Type | Oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Placement on Vehicle | Left Rear |
| Length | 555 mm |
| Paired article numbers | 179826 |
| Weight | 0.46 kg |
| Housing Diameter | 18 mm |
| Eject Force | 480 N |
| Stroke | 210 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 310 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Weight | 3.567 kg |
| Type | Starter |
| Function | Starter |
| Voltage | 12 V |
| Rated Power | 1.4 kW |
| Number of Teeth | 10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Function | Drive Shaft |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Right |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 28 |
| Weight | 10.248 kg |
| External Teeth, Diff.Side | 37 |
| Min. Length | 972 mm |
| Wheel Sided Joint Diameter | 98.0 mm |
| Transmission-side joint diameter | 88.9 mm |
| Type | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Weight | 6.610 kg |
| Rod/Strut | Push Rod |
| Length | 895 mm |
| Cone Size | 24 mm |
| Function | Centre Rod Assembly |
| External Thread Size | M20 x 1,5 |
| Outer diameter | 40 mm |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Placement on Vehicle | Left |
| Paired article numbers | 107121 |
| Function | Cable Repair Kit, tailgate |
| Number of circuits | 12 |
| Cable Length | 1250 mm |
| Extra Description | febi Plus |
| Type | Cable Repair Kit, tailgate |
| Additional Information | with squeeze connector |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Additional Information 2 | with lid |
| Weight | 1.396 kg |
| Function | Expansion Tank, coolant |
| Number of Connectors / Ports | 2 |
| Type | Expansion Tank, coolant |
| Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Weight | 3.3 kg |
| Voltage | 12 V |
| for OE number | 020 911 023 FX |
| Rated Power | 1.1 kW |
| Number of Teeth | 9 |
| Function | Starter |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Wear Warning Contact | prepared for wear warning indicator |
| Placement on Vehicle | Rear Axle |
| Width | 92.2 mm |
| Length | 210 mm |
| Additional Information 2 | with fastening material |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 30.2 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
| Weight | 0.846 kg |
| Fill Medium | Brake Fluid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Paired article numbers | 173714 |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint, with bearing |
| Material | Aluminium |
| Placement on Vehicle | Lower, Front Axle Left |
| Weight | 2.298 kg |
| Type | Control/Trailing Arm, wheel suspension |
| External Thread Size | M14 x 1,5 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Weight | 1.6 kg |
| Width | 30 mm |
| Outer diameter | 180 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Function | Brake Shoe Set |
| Placement on Vehicle | Rear Axle |
| Piston Diameter | 20.6 mm |
| Type | Brake Shoe Set |
| Additional Information | with accessories, with wheel brake cylinder, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Chain Type | Duplex, Closed chain |
| Additional Information 2 | Requires special tools for mounting |
| Weight | 0.93 kg |
| Function | Timing Chain |
| Timing Chain Size | D67ZN |
| Number of Chain Links | 124 |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Weight | 5.320 kg |
| Outer diameter | 480 mm |
| Number of Teeth | 158 |
| Type | Ring Gear, flywheel |
| Function | Ring Gear, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023