Important compatibility info
Type | Mass Air Flow Sensor |
Weight | 0.04 kg |
Number of Connectors / Ports | 4 |
Function | Mass Air Flow Sensor |
Resistor Type | Hot-wire Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 22773 |
Combi Switch Function | with klaxon, with indicator function, with light dimmer function, with rear fog light function, with high beam function |
Function | Steering Column Switch |
Weight | 0.100 kg |
Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Drive Shaft |
Additional Information 2 | with bolts/screws |
Thread Size | M16x1,5 |
Additional Information | with grease |
Type | Drive Shaft |
Min. Length | 526 mm |
Bore Diameter | 10.6 mm |
Number of mounting bores | 6 |
Bolt Hole Circle Diameter | 94 mm |
External Teeth, Wheel Side | 38 |
Weight | 7.098 kg |
ABS Ring Diameter | 104 mm |
Wheel Sided Joint Diameter | 98 mm |
Transmission-side joint diameter | 108 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cylinder Head, air compressor |
Type | Cylinder Head, air compressor |
Weight | 1.3 kg |
Additional Information 2 | without spacer plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with fastening/mounting material |
Width | 50 mm |
Inner diameter | 49 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information 2 | with ABS sensor ring |
Weight | 1.824 kg |
Outer diameter | 92 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Sealing lip material | NBR (nitrile butadiene rubber) |
Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with bearing, with ball joint |
Placement on Vehicle | Front Axle Left, Front |
Material | Steel |
External Thread Size | M14 x 1,5 |
Weight | 4.635 kg |
Steering arm type | Control Arm |
Paired article numbers | 174786 |
Cone Size | 24 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.924 kg |
Height | 102 mm |
Additional Information | with holder |
Filter type | with filter heating, with housing cover |
Type | Cover, fuel filter |
Function | Cover, fuel filter |
Length | 120 mm |
Width | 135 mm |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Mounting points diameter | 17 mm |
Function | Control/Trailing Arm, wheel suspension |
Length | 509 mm |
Steering arm type | Trailing Arm |
Rod/Strut | Guide Rod |
Pipe Diameter | 41 mm |
Weight | 10.35 kg |
Type | Control/Trailing Arm, wheel suspension |
Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.8 kg |
Rated Power | 1.1 kW |
Function | Starter |
Type | Starter |
Voltage | 12 V |
Number of Teeth | 10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 30429 |
Material | Sheet Steel |
Steering arm type | Control Arm |
Weight | 3.88 kg |
Placement on Vehicle | Front Axle Left, Lower |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 19993 |
Steering arm type | Control Arm |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Right, Lower |
Weight | 3.150 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | without holder |
Additional Information 2 | with rubber mount, without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.44 kg |
Outer diameter | 78 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Width of castor bearing surface | 42 mm |
Type | Belt Tensioner, v-ribbed belt |
for OE number | 457 200 31 70 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Clutch Release Bearing |
Weight | 2.836 kg |
for OE number | 81.30550.0116 |
Type | Clutch Release Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.88 kg |
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 30430 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Expansion Tank, coolant |
Extra Description | ProKit |
Type | Expansion Tank, coolant |
Additional Information 2 | with lid |
Weight | 2.180 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.8 kg |
Outer diameter | 124 mm |
Inner diameter | 33 mm |
Bolt Hole Circle Diameter | 80 mm |
Thickness | 24 mm |
Function | Joint, propshaft |
Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Material | Sheet Steel |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Weight | 3.38 kg |
Cone Size | 19 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M24 x 1,5 |
Internal Thread Size | M30 x 1,5 RHT |
Weight | 6.7 kg |
Placement on Vehicle | Front Axle |
Length | 728 mm |
Rod/Strut | Push Rod |
Cone Size | 30 mm |
Pipe Diameter | 40 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Extra Description | ProKit |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.306 kg |
Number of Ribs | 5 |
Parameter | 6PK |
Function | Belt Pulley, crankshaft |
Type | Belt Pulley, crankshaft |
Width | 36 mm |
Outer diameter | 163 mm |
Inner diameter | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1420 mm |
Additional Information 2 | with tensioner element |
Number of Ribs | 8 |
Weight | 1.595 kg |
Type | V-Ribbed Belt Set |
Function | V-Ribbed Belt Set |
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Track rollers material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (29124)
- 1x Febi Belt Tensioner, v-ribbed belt (21027)
Important compatibility info
Extra Description | febi Plus |
Function | Sensor, fuel pressure |
Type | Sensor, fuel pressure |
Weight | 0.06 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.442 kg |
Material | Plastic |
Opening Temperature | 97 °C |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Additional Information | without gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Material | Aluminium |
Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
Function | Control/Trailing Arm, wheel suspension |
Weight | 1.5 kg |
Additional Information | with rubber mounts, with lock nut |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (36954)
- 1x Febi Nut (15902)
Important compatibility info
Length | 850 mm |
Outer diameter | 42 mm |
Rod/Strut | Push Rod |
Weight | 7.65 kg |
Pipe Diameter | 42 mm |
Driver Position | for right-hand drive vehicles |
Cone Size | 31.5 mm |
Function | Centre Rod Assembly |
Extra Description | ProKit |
External Thread Size | M24 x 1,5, M30 x 1,5 |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.746 kg |
Placement on Vehicle | Front Axle |
Length | 399 mm. 630 mm |
Outer diameter | 39 mm |
Eject Force | 450 N |
Function | Shock Absorber, steering |
Type | Shock Absorber, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Operating Mode | Mechanical |
Weight | 1.2 kg |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 225 mm |
Min. Length | 199 mm |
Pipe Diameter | 54 mm. 42 mm |
Mounting points diameter | 14 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front |
Operating Mode | Pneumatic |
Weight | 2.4 kg |
Shock Absorber Mounting Type | Top pin, Bottom Pin |
Max. Length | 418 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
External Thread Size | M12 x 1,75 |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower |
Weight | 3.150 kg |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Paired article numbers | 19991 |
Material | Sheet Steel |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | without holder |
Additional Information 2 | with rubber mount, without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Cone Size | 17.5 mm |
Function | Control/Trailing Arm, wheel suspension |
External Thread Size | M14 x 2 |
Weight | 5.755 kg |
Steering arm type | Semi-Trailing Arm |
Paired article numbers | 186639 |
Additional Information | with rubber mounts, with crown nut and split pin |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Right, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Weight | 1.725 kg |
Placement on Vehicle | Front |
Driver Position | for right-hand drive vehicles |
Function | Wiper Motor |
Additional Information 2 | with cable |
Type | Wiper Motor |
Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023