Proud to be a UK-based company
Contact us
Important compatibility info
| Inner length 2 | 700 mm |
| Function | Cable Pull, manual transmission |
| Weight | 0.858 kg |
| Driver Position | for right-hand drive vehicles |
| Type | Cable Pull, manual transmission |
| Inner length 1 | 680 mm |
| Outer length 2 | 970 mm |
| Outer length 1 | 962 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£94.66
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Weight | 0.050 kg |
| Cable Length | 740 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.095 kg |
| Material | Rubber/Metal |
| Outer diameter | 40 mm. 24 mm |
| Thickness | 49 mm |
| Inner diameter | 12 mm |
| Placement on Vehicle | Front Axle Left, Lower, Front, Outer, Front Axle Right |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.58
Important compatibility info
| Function | Seal, injector holder |
| Weight | 0.003 kg |
| Height | 2.5 mm |
| Material | Steel |
| Outer diameter | 20.2 mm |
| Inner diameter | 7.6 mm |
| Type | Seal, injector holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.90
Important compatibility info
| Weight | 0.32 kg |
| Length | 409 mm |
| Height | 37 mm |
| Width | 201 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.38
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bolt Hole Circle Diameter | 108 mm |
| Number of Holes | 5 |
| Inner diameter | 27.3 mm |
| Outer diameter | 129.5 mm |
| Thickness | 78.5 mm |
| Function | Wheel Hub |
| Weight | 1.97 kg |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.24
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Extra Description | ProKit |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Thread Length | 29.2 mm |
| Rod/Strut | Coupling Rod |
| Thickness | 62.5 mm |
| Outer diameter | 14 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 260 mm |
| Material | Steel |
| Weight | 0.54 kg |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.35
Important compatibility info
| Weight | 0.09 kg |
| Function | Mounting, stabiliser bar |
| Inner diameter | 20.3 mm |
| Thickness | 49.5 mm |
| Outer diameter | 48.2 mm |
| Material | Rubber |
| Width | 45 mm |
| Length | 45.9 mm |
| Placement on Vehicle | Front Axle |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.56
Important compatibility info
| Weight | 0.14 kg |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
| Extra Description | febi Plus |
| Type | Oil Line, charger |
| for OE number | 0379.68 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.59
Important compatibility info
| Colour | Black |
| Outer diameter | 74 mm |
| Function | Sealing Cap, oil filler neck |
| Weight | 0.045 kg |
| Additional Information | with gasket/seal |
| Extra Description | febi Plus |
| Type | Sealing Cap, oil filler neck |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.53
Important compatibility info
| Weight | 1.020 kg |
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| External Thread Size | M10 x 1,5 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.09
Important compatibility info
| Type | Ignition Coil |
| Function | Ignition Coil |
| for OE number | 27301-04000 |
| Weight | 0.195 kg |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.04
Important compatibility info
| Weight | 0.146 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Resistance | 1150 Ohm |
| Cable Length | 1455 mm |
| Function | Sensor, wheel speed |
| Number of Connectors / Ports | 2 |
| Length | 1535 mm |
| Type | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.19
Important compatibility info
| for OE number | 33220-50G02 |
| Weight | 0.080 kg |
| Number of Connectors / Ports | 3 |
| Function | Sensor, camshaft position |
| Type | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.32
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 4.250 kg |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 279 mm |
| Thickness | 30.3 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8.5 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 55.1 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.29
Important compatibility info
| Brake Type | Disc Brake |
| Parameter | Typ 24 |
| Stroke | 64 mm |
| Distance of fastening bolts | 120 mm |
| Piston Rod Length | 15 mm |
| Function | Diaphragm Brake Cylinder |
| Internal Thread Size | M16 x 1,5 |
| Weight | 3.37 kg |
| Type | Diaphragm Brake Cylinder |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.25
Important compatibility info
| Weight | 0.240 kg |
| Length | 274 mm |
| Pipe Diameter | 9 mm |
| Type | Fuel filter |
| Function | Fuel filter |
| Height | 274 mm |
| Width | 55 mm |
| Outer diameter | 55 mm |
| Filter type | In-Line Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Placement on Vehicle | Centre |
| Length | 435 mm |
| Additional Information 2 | with ball bearing |
| Inner diameter | 30 mm |
| Weight | 0.993 kg |
| Bearing Type | Ball Bearing |
| Type | Suspension, propshaft |
| Function | Suspension, propshaft |
| Hole Spacing | 397 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.81
Important compatibility info
| Function | Spring-loaded Cylinder |
| Brake Type | Disc Brake |
| Stroke | 64 mm |
| Weight | 6.9 kg |
| Distance of fastening bolts | 120 mm |
| Piston Rod Length | 15 mm |
| Internal Thread Size | M16 x 1,5 |
| Type | Spring-loaded Cylinder |
| Additional Information | with fastening/mounting material |
| Parameter | Typ 20 / 24 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.87
Important compatibility info
| Weight | 1.500 kg |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.53
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023