Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Shock Absorber |
| Bore Diameter | 14 mm |
| Shock Absorber Design | Suspension Strut |
| External Thread Size | M12 x 1,25 |
| Pipe Diameter | 45 mm |
| Max. Length | 535 mm |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Min. Length | 350 mm |
| Shock Absorber Type | Gas Pressure |
| Piston conrod diameter | 20 mm |
| Mounting bores distance | 60 mm |
| Shock Absorber System | Twin-Tube |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.82
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 851 mm |
| Additional Information | with nuts |
| Type | Tie Rod |
| Function | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.83
Important compatibility info
| Number of Connectors / Ports | 5 |
| for OE number | 059 906 461 N |
| Type | Mass Air Flow Sensor |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.85
Important compatibility info
| Min. Length | 464 mm |
| Transmission-side joint diameter | 107.9 mm |
| Wheel Sided Joint Diameter | 97.9 mm |
| External Teeth, Wheel Side | 36 |
| Number of mounting bores | 6 |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Bore Diameter | 10.7 mm |
| Thread Size | M16x1,5 |
| Bolt Hole Circle Diameter | 94.1 mm |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.86
Important compatibility info
| Placement on Vehicle | Upper |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 74 |
| Timing Chain Size | G67AM, G67HP, G67HR |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Additional Information | with slide rails, with chain tensioner |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (21267)
- 1x Febi Guide, timing chain (24829)
- 1x Febi Guide, timing chain (24830)
- 1x Febi Tensioner, timing chain (21291)
£74.87
Important compatibility info
| Material | Rubber/Metal |
| Bolt Hole Circle Diameter | 90 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
| Outer diameter | 124 mm |
| Thickness | 23 mm |
| Number of Holes | 6 |
| Mounting points diameter | 14 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.89
Important compatibility info
| Rotor Style | Slotted/Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle Left |
| Outer diameter | 360 mm |
| Thickness | 52.3 mm |
| Brake Disc Thickness | 36 mm |
| Minimum thickness | 34 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Paired article numbers | 171598 |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
Technical Information
Attention, this is a sided brake disc.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.91
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information | with lock nut, with rubber mounts |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 193967 |
| Cone Size | 12 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.91
Important compatibility info
| Operating Mode | Hydraulic |
| Placement on Vehicle | Upper Left |
| Paired article numbers | 12511 |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.94
Important compatibility info
| Bolt Hole Circle Diameter | 90 mm |
| Function | Joint, propshaft |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| Additional Information | with nuts |
| Number of Holes | 6 |
| Additional Information 2 | with bolts/screws, with washers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (03601)
- 6x Febi Screw (03931)
- 1x Febi Assembly Kit, propshaft joint (22117)
£74.94
Important compatibility info
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
| Number of Connectors / Ports | 4 |
| Additional Information 2 | with sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.95
Important compatibility info
| Length | 341 mm |
| Placement on Vehicle | Lower |
| Type | Air Tank, compressed-air system |
| Operating Pressure | 20 bar |
| Capacity | 5 l |
| Material | Steel |
| Outer diameter | 154 mm |
| Number of Connectors / Ports | 4 |
| Internal Thread Size | M22 x 1,5 |
| Function | Air Tank, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.96
Important compatibility info
| Extra Description | Basic Short Kit |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 138 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | G53HR |
| Replaces | 38195 |
| Additional Information | with slide rails, with chain tensioner |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (29867)
- 1x Febi Guide, timing chain (29901)
- 1x Febi Guide, timing chain (29902)
- 1x Febi Guide, timing chain (29903)
- 1x Febi Tensioner, timing chain (47638)
£74.99
Important compatibility info
| Min. Length | 494 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Bolt Hole Circle Diameter | 104 mm |
| Additional Information 2 | with screw |
| Bore Diameter | 11 mm |
| External Teeth, Wheel Side | 42 |
| Thread Size | M16x1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of hub fastening holes | 6 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 81.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.00
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M27x1,5 |
| External Teeth, Wheel Side | 30 |
| External Teeth, Diff.Side | 27 |
| Min. Length | 605 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Transmission-side joint diameter | 85 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.02
Important compatibility info
| Additional Information | with gasket/seal |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Housing material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Length | 915 mm |
| Material | Steel |
| Function | Centre Rod Assembly |
| Pipe Diameter | 40 mm. 50 mm |
| Cone Size | 30 mm |
| Thickness | 118 mm |
| Spanner Size | 36 |
| Rod/Strut | Push Rod |
| Colour | Black |
| Driver Position | for right-hand drive vehicles |
| Thread Length | 27.2 mm. 80 mm |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Material | Sheet Steel |
| Steering arm type | Triangular Control Arm (CV) |
| Paired article numbers | 37611 |
| Placement on Vehicle | Front Axle Left, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 630 mm |
| Min. Length | 399 mm |
| Stroke | 231 mm |
| Pipe Diameter | 32 mm. 28 mm |
| Piston conrod diameter | 15 mm |
| Function | Shock Absorber, steering |
| Type | Shock Absorber, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Length | 850 mm |
| Outer diameter | 42 mm |
| Rod/Strut | Push Rod |
| Pipe Diameter | 42 mm |
| Driver Position | for right-hand drive vehicles |
| Cone Size | 31.5 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5, M30 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| External Thread Size | M24 x 1,5 |
| Rod/Strut | Push Rod |
| Placement on Vehicle | Front Axle |
| Length | 878 mm |
| Pipe Diameter | 36 mm |
| Function | Centre Rod Assembly |
| Cone Size | 30 mm |
| Internal Thread Size | M30 x 1,5 RHT |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Function | Shock Absorber, driver cab suspension |
| Mounting points diameter | 12 mm |
| Piston conrod diameter | 19 mm |
| Pipe Diameter | 70 mm. 42 mm |
| Max. Length | 380 mm |
| Min. Length | 320 mm |
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Paired article numbers | 24419 |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Rod/Strut | Push Rod |
| Outer diameter | 53 mm |
| Length | 846 mm |
| Cone Size | 26 mm |
| Pipe Diameter | 48 mm |
| Function | Centre Rod Assembly |
| Driver Position | for right-hand drive vehicles |
| Internal Thread Size | M30 x 1,5 RHT |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| External Thread Size | M20 x 1,5 |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Function | Fifth Wheel Kingpin |
| Diameter | 2 Inch |
| Fulfils ECE norm | E1 R55 |
| Type | Fifth Wheel Kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 144 |
| Function | Timing Chain Kit |
| Timing Chain Size | G53HR |
| for OE number | 11 31 8 618 317 S3 |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (28719)
- 1x Febi Guide, timing chain (30448)
- 1x Febi Guide, timing chain (30453)
- 1x Febi Guide, timing chain (30446)
- 1x Febi Tensioner, timing chain (47638)
£75.03
Important compatibility info
| Operating Mode | Mechanical |
| Placement on Vehicle | Rear |
| Piston conrod diameter | 19 mm |
| External Thread Size | M16 x 2 |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 381 mm |
| Min. Length | 331 mm |
| Pipe Diameter | 52 mm |
| Mounting points diameter | 16 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Function | Centre Rod Assembly |
| Cone Size | 26 mm |
| Pipe Diameter | 40 mm |
| Rod/Strut | Push Rod |
| Length | 940 mm |
| Placement on Vehicle | Front Axle |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Type | Parts Set, maintenance service |
| Function | Parts Set, maintenance service |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Air Filter (30443)
- 1x Febi Oil Filter (45320)
- 1x Febi Fuel filter (31397)
- 1x Febi Air Dryer Cartridge, compressed-air system (34322)
- 1x Febi Seal Ring (40687)
- 1x Febi Filter, cabin air (18541)
£75.03
Important compatibility info
| Function | Suspension, propshaft |
| Inner diameter | 35 mm |
| Thickness | 180 mm |
| Outer diameter | 55 mm |
| Width | 37 mm |
| Type | Suspension, propshaft |
| Additional Information 2 | with rolling bearing |
| Bearing Type | Rolling Bearing |
| Hole Spacing | 160 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Spanner Size | 17 |
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Type | Sensor, exhaust gas temperature |
| Placement on Vehicle | before soot particulate filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023