Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 2.35 kg |
| Width | 20 mm. 16 mm |
| Material | Cast Steel |
| Outer diameter | 137 mm |
| Inner diameter | 25 mm |
| Number of Ribs | 7 |
| Parameter | 5PK + 4PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.27
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M20 x 1,5 |
| External Teeth, Wheel Side | 33 |
| Weight | 0.001 kg |
| External Teeth, Diff.Side | 34 |
| Min. Length | 618 mm |
| ABS Ring Diameter | 78 mm |
| Wheel Sided Joint Diameter | 84 mm |
| Transmission-side joint diameter | 82 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.28
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information | with rubber mounts, with crown nut and split pin |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 184518 |
| Weight | 5.755 kg |
| Cone Size | 17.5 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 2 | 20 mm |
| External Thread Size | M14 x 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.29
Important compatibility info
| Type | Mass Air Flow Sensor |
| Weight | 0.04 kg |
| Number of Connectors / Ports | 4 |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.32
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Left |
| Weight | 1.700 kg |
| Type | Mounting, manual transmission |
| Function | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.35
Important compatibility info
| Placement on Vehicle | Left |
| Weight | 1.647 kg |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.35
Important compatibility info
| for OE number | 22 11 6 777 382 |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 1.200 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.36
Important compatibility info
| Weight | 0.020 kg |
| Number of Connectors / Ports | 10 |
| Function | Steering Angle Sensor |
| Voltage | 12 V |
| Type | Steering Angle Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.36
Important compatibility info
| Weight | 1.07 kg |
| Additional Information 2 | with screw |
| Width of castor bearing surface | 30 mm |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| for OE number | 11 28 7 582 946 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.38
Important compatibility info
| Weight | 1.64 kg |
| Placement on Vehicle | Left Front |
| Length | 183 mm |
| Width | 121 mm |
| Thickness | 131 mm |
| Paired article numbers | 30628 |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Replaces | 27415 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.38
Important compatibility info
| Weight | 0.4 kg |
| Number of Connectors / Ports | 2 |
| Function | Coolant Control Valve |
| Extra Description | febi Plus |
| Type | Coolant Control Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.39
Important compatibility info
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with rolling bearing |
| Hole Spacing | 221 mm |
| Weight | 3.400 kg |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Bearing Type | Rolling Bearing |
| Inner diameter | 75 mm |
| Length | 260 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.39
Important compatibility info
| Type | Piston, air compressor |
| Outer diameter | 100 mm |
| Function | Piston, air compressor |
| Weight | 0.42 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.41
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Function | Brake Disc |
| Brake Disc Thickness | 33 mm |
| Weight | 9.8 kg |
| Surface | Coated |
| Centering Diameter | 93 mm |
| Bolt Hole Circle Diameter | 116 mm |
| Minimum thickness | 30 mm |
| Type | Brake Disc Rotor |
| Thickness | 55 mm |
| Outer diameter | 288 mm |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.41
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 2.0 kW |
| Function | Starter |
| Weight | 3.46 kg |
| Type | Starter |
| for OE number | 02Z 911 023 FX |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.42
Important compatibility info
| Placement on Vehicle | after soot particulate filter |
| External Thread Size | M14 x 1,5 |
| Function | Sensor, exhaust gas temperature |
| Cable Length | 724 mm |
| Type | Sensor, exhaust gas temperature |
| Number of Connectors / Ports | 2 |
| Weight | 0.058 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.47
Important compatibility info
| Weight | 1.610 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.47
Important compatibility info
| Weight | 1.26 kg |
| Additional Information 2 | with bolts/screws, with washers |
| Outer diameter | 132 mm |
| Placement on Vehicle | Front |
| Bolt Hole Circle Diameter | 90 mm |
| Inner diameter | 37 mm |
| Thickness | 24 mm |
| Function | Joint, propshaft |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| Number of Holes | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (01976)
- 3x Febi Screw (03931)
- 3x Febi Screw (09110)
- 1x Febi Assembly Kit, propshaft joint (22117)
£71.47
Important compatibility info
| Placement on Vehicle | Lower |
| Length | 709 mm |
| Material | Steel |
| Capacity | 30 l |
| Operating Pressure | 15.5 bar |
| Function | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
| Outer diameter | 246 mm |
| Weight | 10.00 kg |
| Number of Connectors / Ports | 4 |
| Type | Air Tank, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.47
Important compatibility info
| Weight | 1.05 kg |
| Belts | with rounded tooth profile |
| Width | 28 mm |
| Number of Teeth | 132 |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (28588)
- 1x Febi Tensioner Pulley, timing belt (21627)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (15492)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (178778)
£71.49
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023