Proud to be a UK-based company
Contact us
Important compatibility info
| Additional Information 2 | with bolts/screws |
| Width | 30 mm |
| Outer diameter | 143 mm |
| Inner diameter | 30 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (30214)
- 4x Febi Centering Bolt, crankshaft pulley (33554)
£71.09
Important compatibility info
| Function | Clutch Release Bearing |
| Type | Clutch Release Bearing |
| for OE number | 1702 641 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.09
Important compatibility info
| Placement on Vehicle | after soot particulate filter |
| External Thread Size | M14 x 1,5 |
| Function | Sensor, exhaust gas temperature |
| Cable Length | 724 mm |
| Type | Sensor, exhaust gas temperature |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.09
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Steering arm type | Triangular Control Arm (CV) |
| Additional Information 2 | with ball joint |
| Cone Size 2 | 18 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left |
| Material | Sheet Steel |
| Additional Information | with rubber mounts |
| Paired article numbers | 181128 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.10
Important compatibility info
| Height | 200 mm |
| Outer diameter 1 | 87 mm |
| Outer diameter 2 | 85 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.12
Important compatibility info
| Width | 22 mm |
| Outer diameter | 508 mm |
| Inner diameter | 460 mm |
| Number of Teeth | 167 |
| Function | Ring Gear, flywheel |
| Type | Ring Gear, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.13
Important compatibility info
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 628 240 23 17 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.13
Important compatibility info
| Rim Hole Number | 6 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 300 mm |
| Thickness | 54 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 139.7 mm |
| Centering Diameter | 96 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.14
Important compatibility info
| Additional Information | with lock nut, with rubber mounts |
| Placement on Vehicle | Upper, Front Axle Right |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 107864 |
| Cone Size | 14 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| External Thread Size | M12 x 1,75 |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.14
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Rated Power | 348 W |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.15
Important compatibility info
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.6 mm |
| Function | Brake Disc |
| Surface | Coated |
| Number of mounting bores | 2 |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 302 mm |
| Thickness | 66 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 18 mm |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.17
Important compatibility info
| Minimum thickness | 17 mm |
| Placement on Vehicle | Rear Axle |
| Brake Disc Thickness | 20 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Function | Brake Disc |
| Number of mounting bores | 2 |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Outer diameter | 354 mm |
| Thickness | 74.8 mm |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.17
Important compatibility info
| Width | 47 mm |
| Material | Metal |
| Outer diameter | 70 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 29 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Inner diameter | 15 mm |
| Mounting points diameter | 15 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.19
Important compatibility info
| Driver Position | for right-hand drive vehicles |
| Inner Length | 922 mm |
| Outer Length | 1092 mm |
| Type | Cable Pull, clutch control |
| Function | Cable Pull, clutch control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.19
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 118 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | G53HC, G53HR |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (25371)
- 1x Febi Guide, timing chain (25468)
- 1x Febi Guide, timing chain (27060)
- 1x Febi Tensioner, timing chain (25412)
£71.20
Important compatibility info
| Thickness | 45 mm |
| Rim Hole Number | 5 -Hole |
| Brake Disc Thickness | 26 mm |
| Function | Brake Disc |
| Rotor Style | Vented |
| Minimum thickness | 23.8 mm |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
| Outer diameter | 280 mm |
| Centering Diameter | 61 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Number of mounting bores | 2 |
| Surface | Coated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.20
Important compatibility info
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 17318 |
| Placement on Vehicle | Front Axle Right, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with holder, with lock nut, with rubber mounts |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.21
Important compatibility info
| Number of Connectors / Ports | 6 |
| Type | Ignition Coil |
| Function | Ignition Coil |
| for OE number | 55200112 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.21
Important compatibility info
| Placement on Vehicle | Exhaust Side |
| Type | Control Valve, camshaft adjustment |
| Function | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.21
Important compatibility info
| Outer diameter | 160 mm |
| Thickness | 260 mm. 75 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| External Thread Size | M8 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.23
Important compatibility info
| Length | 395 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Diameter 1 | 38 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M24 x 1,5 |
| Material | Steel |
| Rod/Strut | Push Rod |
| Cone Size | 32 mm |
| Placement on Vehicle | Rear Axle |
| Additional Information | with nuts |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.23
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 276 mm |
| Min. Length | 237 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 14 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.24
Important compatibility info
| Additional Information | with rubber mounts |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 187797 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Material | Sheet Steel |
| Cone Size | 20 mm |
| Cone Size 1 | 15.7 mm |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.26
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Placement on Vehicle | Front Axle Right |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 173586 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Cone Size | 17.4 mm |
| Additional Information | with crown nut and split pin, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.27
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Placement on Vehicle | Front Axle Left |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 173585 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Cone Size | 17.4 mm |
| Additional Information | with crown nut and split pin, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.27
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M20 x 1,5 |
| External Teeth, Wheel Side | 33 |
| External Teeth, Diff.Side | 34 |
| Min. Length | 618 mm |
| ABS Ring Diameter | 78 mm |
| Wheel Sided Joint Diameter | 84 mm |
| Transmission-side joint diameter | 82 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.28
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| for OE number | 21950-A5000 |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.28
Important compatibility info
| Function | Alternator Freewheel Clutch |
| Inner diameter | 17 mm |
| Outer diameter | 76 mm |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.30
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Rear, outer |
| Additional Information | with rubber mounts |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 185590 |
| Cone Size | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.32
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
| Steering arm type | Control Arm |
| Material | Aluminium |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.34
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right, Left |
| Type | Mounting, engine |
| Additional Information 2 | with splash protection cover |
| Replaces | 31079 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.36
Important compatibility info
| Number of Connectors / Ports | 10 |
| Function | Steering Angle Sensor |
| Voltage | 12 V |
| Type | Steering Angle Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.36
Important compatibility info
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
| Opening Temperature | 87 °C |
| Outer diameter | 73 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.36
Important compatibility info
| Type | Thermostat, coolant |
| Opening Temperature | 91 °C |
| Outer diameter | 73 mm |
| Additional Information 2 | with seal ring |
| Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.36
Important compatibility info
| Number of Teeth | 122 |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
| Replaces | 14638 |
| Width | 26.5 mm |
| Belts | with rounded tooth profile |
| Units / Pulleys | incl. tensioner pulley |
Additional Information
Technical Information
The diamond-coated washer included in this kit has to be used to replace the formerly fitted washer.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (14370)
- 1x Febi Tensioner Pulley, timing belt (11560)
- 1x Febi Pulley Bolt (17232)
- 1x Febi Washer, crankshaft pulley (31815)
£71.38
Important compatibility info
| Width of castor bearing surface | 48 mm |
| Outer diameter | 81 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.38
Important compatibility info
| Extra Description | ProKit |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 23.7 mm |
| Paired article numbers | 176677 |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint, with bearing |
| Material | Aluminium |
| Additional Information | with fastening/mounting material |
| Placement on Vehicle | Front Axle Right, Lower, Front |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (174778)
- 1x Febi Bolt, control arm (40158)
- 2x Febi Washer (21558)
- 1x Febi Nut (21557)
£71.39
Important compatibility info
| Additional Information 2 | with bearing, with ball joint |
| Type | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 23.7 mm |
| Paired article numbers | 176678 |
| Steering arm type | Control Arm |
| Material | Aluminium |
| Placement on Vehicle | Front Axle Left, Lower, Front |
| Additional Information | with fastening/mounting material |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (174777)
- 1x Febi Bolt, control arm (40158)
- 2x Febi Washer (21558)
- 1x Febi Nut (21557)
£71.39
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Function | Brake Disc |
| Brake Disc Thickness | 33 mm |
| Surface | Coated |
| Centering Diameter | 93 mm |
| Bolt Hole Circle Diameter | 116 mm |
| Minimum thickness | 30 mm |
| Type | Brake Disc Rotor |
| Thickness | 55 mm |
| Outer diameter | 288 mm |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.41
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 2.0 kW |
| Function | Starter |
| Type | Starter |
| for OE number | 02Z 911 023 FX |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.42
Important compatibility info
| Placement on Vehicle | engine sided |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.43
Important compatibility info
| Material | Steel |
| Outer diameter | 276 mm |
| Length | 411.5 mm |
| Capacity | 20 l |
| Operating Pressure | 15.5 bar |
| Function | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
| Type | Air Tank, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.43
Important compatibility info
| Placement on Vehicle | Front Axle, Rear Axle |
| Number of Connectors / Ports | 2 |
| Function | Sensor, pneumatic suspension level |
| Type | Sensor, pneumatic suspension level |
| Internal Thread Size | M6 x 1 |
| Replaces | 45397 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.45
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 27 |
| External Teeth, Diff.Side | 26 |
| Min. Length | 679 mm |
| Wheel Sided Joint Diameter | 79.4 mm |
| Transmission-side joint diameter | 75.5 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.45
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1206 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.45
Important compatibility info
| Additional Information 2 | with dryer |
| for OE number | 1 716 734 |
| Refrigerant | R 134a |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 471 mm |
| Core Width | 602 mm |
| Core Depth | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.45
Important compatibility info
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with rolling bearing |
| Hole Spacing | 221 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Bearing Type | Rolling Bearing |
| Inner diameter | 75 mm |
| Length | 260 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.47
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bore Diameter | 16 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 354 mm |
| Min. Length | 236 mm |
| Pipe Diameter | 53 mm. 45 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.48
Important compatibility info
| Function | Clutch, radiator fan |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.49
Important compatibility info
| Belts | with rounded tooth profile |
| Width | 28 mm |
| Number of Teeth | 132 |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (28588)
- 1x Febi Tensioner Pulley, timing belt (21627)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (15492)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (178778)
£71.49
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023