Proud to be a UK-based company
Contact us
Important compatibility info
| for OE number | 011 542 48 18 |
| Number of Connectors / Ports | 2 |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.77
Important compatibility info
| Number of Connectors / Ports | 2 |
| for OE number | 011 542 15 18 |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.77
Important compatibility info
| Bore Diameter | 8.5 mm |
| External Teeth, Wheel Side | 27 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 96.5 mm |
| Wheel Sided Joint Diameter | 83.0 mm |
| ABS Ring Diameter | 83 mm |
| Min. Length | 665 mm |
| Placement on Vehicle | Rear Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| Bolt Hole Circle Diameter | 79.9 mm |
| Number of mounting bores | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.80
Important compatibility info
| Material | Aluminium |
| Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bolts/screws |
| Additional Information | with rubber mounts, with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (30907)
- 1x Febi Nut (39199)
- 2x Febi Screw (32561)
- 2x Febi Nut (22263)
£71.81
Important compatibility info
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Type | Timing Belt Kit |
| Width | 20 mm |
| Number of Teeth | 163 |
| Units / Pulleys | incl. tensioner pulley, incl. deflection pulley |
| Function | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (47885)
- 1x Febi Tensioner Pulley, timing belt (45795)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (176535)
- 1x Febi Bolt, tensioner pulley (184719)
£71.81
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| for OE number | 238 240 20 00 |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.83
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 302 mm |
| Thickness | 70 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 24.5 mm |
| Bolt Hole Circle Diameter | 130 mm |
| Centering Diameter | 90 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.84
Important compatibility info
| Placement on Vehicle | Front Axle |
| Thickness | 54 mm |
| Outer diameter | 304 mm |
| Minimum thickness | 26 mm |
| Centering Diameter | 71.1 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Bolt Hole Circle Diameter | 108 mm |
| Brake Disc Thickness | 28 mm |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.84
Important compatibility info
| Placement on Vehicle | Left |
| Type | Mounting Bracket, shock absorber mounting (driver cab) |
| Function | Mounting Bracket, shock absorber mounting (driver cab) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.85
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right |
| External Thread Size | M10 x 1,5 |
| for OE number | 22 11 6 861 406 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.86
Important compatibility info
| Placement on Vehicle | Left, Right |
| Colour | Purple |
| Bearing/Mounting Type | Vacuum controlled hydro mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.89
Important compatibility info
| Surface | Coated |
| Placement on Vehicle | Front Axle |
| Thickness | 48.2 mm |
| Brake Disc Thickness | 28 mm |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Number of mounting bores | 2 |
| Rim Hole Number | 5 -Hole |
| Centering Diameter | 72 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Rotor Style | Internally Vented |
| Outer diameter | 320 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.90
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 32086 |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.91
Important compatibility info
| Type | Interior Blower |
| Function | Interior Blower |
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.91
Important compatibility info
| Outer diameter | 60 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Width of castor bearing surface | 31 mm |
| Type | Belt Tensioner, v-ribbed belt |
| for OE number | 82 00 761 531 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.92
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 52 mm |
| Outer diameter | 98 mm |
| Inner diameter | 33 mm |
| Bolt Hole Circle Diameter | 116 mm |
| Outer diameter 1 | 69 mm |
| Outer diameter 2 | 148 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.92
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 320 mm |
| Thickness | 78.2 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 18.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.96
Important compatibility info
| Placement on Vehicle | Left |
| Length | 114 mm |
| Width | 68 mm |
| Material | Rubber/Metal |
| Thickness | 126 mm |
| Paired article numbers | 107737 |
| Function | Mounting Bracket, shock absorber mounting (driver cab) |
| Type | Mounting Bracket, shock absorber mounting (driver cab) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.99
Important compatibility info
| Thickness | 126 mm |
| Paired article numbers | 107736 |
| Function | Mounting Bracket, shock absorber mounting (driver cab) |
| Material | Rubber/Metal |
| Width | 68 mm |
| Length | 114 mm |
| Placement on Vehicle | Right |
| Type | Mounting Bracket, shock absorber mounting (driver cab) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.99
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| External Thread Size | M10 x 1,5 |
| Type | Mounting, engine |
| for OE number | 22 11 6 873 704 |
| Driver Position | for right-hand drive vehicles |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.00
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 120 mm |
| Outer diameter | 120 mm |
| Inner diameter | 30 mm |
| Bolt Hole Circle Diameter | 98 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.01
Important compatibility info
| Voltage | 12 V |
| Placement on Vehicle | Front |
| Driver Position | for right-hand drive vehicles |
| Function | Wiper Motor |
| Additional Information 2 | with cable |
| Type | Wiper Motor |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.02
Important compatibility info
| Paired article numbers | 22125 |
| Combi Switch Function | with indicator function, with rear fog light function, with light dimmer function, with high beam function |
| Function | Steering Column Switch |
| Number of Connectors / Ports | 11 |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.02
Important compatibility info
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.02
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Sensor, camshaft position |
| Type | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.02
Important compatibility info
| Surface | Coated |
| Centering Diameter | 67 mm |
| Number of mounting bores | 1 |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 330 mm |
| Thickness | 54 mm |
| Rim Hole Number | 5 -Hole |
| Brake Disc Thickness | 14 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Minimum thickness | 12.3 mm |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Rotor Style | solid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.02
Important compatibility info
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| External Thread Size | M10 x 1,5 |
| Type | Mounting, engine |
| Additional Information 2 | with splash protection cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.03
Important compatibility info
| Additional Information 2 | with seal ring |
| Operating Mode | Electric |
| Number of Connectors / Ports | 4. 2 |
| Type | Fuel Feed Unit |
| Function | Fuel Feed Unit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.03
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 42 mm |
| Outer diameter | 92 mm |
| Inner diameter | 49 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with bolts/screws |
| Bearing Type | Rolling Bearing |
| Replaces | 34739 |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.04
Important compatibility info
| Type | Sensor, speed |
| Function | Sensor, speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.04
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 418 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| External Thread Size | M12 x 1,75 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.05
Important compatibility info
| Placement on Vehicle | Front Axle Left, Upper |
| Additional Information | with rubber mounts, with lock nut |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 195980 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.05
Important compatibility info
| Placement on Vehicle | Lower Front Axle, Left |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 07966 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, without bearing |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (03822)
- 1x Febi Ball Joint (03825)
£72.06
Important compatibility info
| Paired article numbers | 07965 |
| Placement on Vehicle | Lower Front Axle, Right |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, without bearing |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (03822)
- 1x Febi Ball Joint (03825)
£72.06
Important compatibility info
| Additional Information 2 | with switch, with bolts/screws |
| Function | Steering Lock |
| Type | Steering Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Placement on Vehicle | Lower |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 188 |
| Timing Chain Size | G68VCO, G68V-1 |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Outer diameter | 160 mm |
| Bolt Hole Circle Diameter | 147 mm |
| Function | Clutch, radiator fan |
| Type | Clutch, radiator fan |
| Replaces | 17995 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Steering arm type | Control Arm |
| Material | Aluminium |
| Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with lock nut |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (36954)
- 1x Febi Nut (15902)
£72.06
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 30429 |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Left, Lower |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 30430 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 399 mm. 630 mm |
| Outer diameter | 39 mm |
| Eject Force | 450 N |
| Function | Shock Absorber, steering |
| Type | Shock Absorber, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Stabiliser Diameter | 18 mm |
| Placement on Vehicle | Front Axle |
| Length | 950 mm |
| Additional Information | with rubber mounts |
| Function | Stabiliser Bar, suspension |
| Extra Description | ProKit |
| Type | Stabiliser Bar, suspension |
| Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (37071)
- 1x Febi Repair Kit, stabiliser bush (37076)
£72.06
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Additional Information | with gaskets/seals |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Length | 850 mm |
| Outer diameter | 42 mm |
| Rod/Strut | Push Rod |
| Pipe Diameter | 42 mm |
| Driver Position | for right-hand drive vehicles |
| Cone Size | 31.5 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5, M30 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1005 mm |
| Outer diameter | 42 mm |
| Rod/Strut | Push Rod |
| Cone Size | 26 mm. 30 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M20 x 1,5, M24 x 1,5 |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Rod/Strut | Push Rod |
| Length | 895 mm |
| Cone Size | 24 mm |
| Function | Centre Rod Assembly |
| External Thread Size | M20 x 1,5 |
| Outer diameter | 40 mm |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Placement on Vehicle | Front Axle |
| Length | 728 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 44621 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bolts/screws |
| Additional Information | with rubber mounts, with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (38701)
- 2x Febi Screw (44617)
- 2x Febi Nut (44618)
- 1x Febi Clamping Bolt, ball joint (17532)
- 1x Febi Nut (24361)
£72.06
Important compatibility info
| Type | Starter |
| Function | Starter |
| Voltage | 12 V |
| Rated Power | 1.4 kW |
| Number of Teeth | 10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Length | 501 mm |
| Colour | Black |
| Function | Oil sump |
| Wet Sump Material | Sheet Steel |
| Internal Thread Size | M12 x 1,5 |
| Type | Oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023