Important compatibility info
Function | Clutch Release Bearing |
Type | Clutch Release Bearing |
for OE number | 1702 641 |
Weight | 0.779 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Stroke | 196 mm |
Eject Force | 985 N |
Placement on Vehicle | both sides |
Weight | 0.3 kg |
Length | 711 mm |
Housing Diameter | 22 mm |
Housing length | 395.5 mm |
Mounting points diameter | 17.8 mm |
Piston conrod diameter | 10 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Starter |
Number of Teeth | 9 |
Voltage | 12 V |
Rated Power | 0.9 kW |
Weight | 3.15 kg |
Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Cone Size | 26 mm |
Weight | 1.535 kg |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 175620 |
Steering arm type | Control Arm |
Material | Aluminium |
Placement on Vehicle | Front Axle Right, Lower, Front |
Additional Information | with rubber mounts |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.478 kg |
Operating Mode | Electric |
Number of Connectors / Ports | 3 |
Valve type | Solenoid Valve |
Type | Coolant Control Valve |
Function | Coolant Control Valve |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Tensioner Pulley, timing belt |
Outer diameter | 62 mm |
Width | 34 mm |
Weight | 0.852 kg |
Type | Tensioner Pulley, timing belt |
Replaces | 26718 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Function | Tie Rod End |
Thickness | 79 mm |
Placement on Vehicle | Front Axle Right |
Length | 156 mm |
Spanner Size | 22 |
Weight | 0.98 kg |
Type | Tie Rod End |
Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 19993 |
Steering arm type | Control Arm |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Right, Lower |
Weight | 3.150 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | without holder |
Additional Information 2 | without ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.472 kg |
Operating Mode | Electric |
Number of Connectors / Ports | 2 |
Valve type | Solenoid Valve |
Type | Coolant Control Valve |
Function | Coolant Control Valve |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.71 kg |
Placement on Vehicle | Rear, both sides |
Operating Mode | Mechanical |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 328 mm |
Min. Length | 252 mm |
Pipe Diameter | 63 mm |
Mounting points diameter | 14 mm |
Piston conrod diameter | 12.5 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bolt Hole Circle Diameter | 64 mm |
Inner diameter | 29 mm |
Weight | 3.4 kg |
Outer diameter | 136 mm |
Width | 88 mm |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing Kit |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Type | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Drive Shaft |
Function | Drive Shaft |
Weight | 10.596 kg |
External Teeth, Wheel Side | 31 |
Paired article numbers | 182815 |
Placement on Vehicle | Front Axle Right |
Additional Information 2 | with nut |
Thread Size | M24 x 1,5 |
Transmission-side joint diameter | 88.9 mm |
Wheel Sided Joint Diameter | 98 mm |
External Teeth, Diff.Side | 39 |
Min. Length | 1072 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.343 kg |
Type | Oil sump |
Function | Oil sump |
Extra Description | febi Plus |
External Thread Size | M6 x 1 |
Length | 457 mm |
Additional Information | with oil drain plug |
Additional Information 2 | with oil sump gasket |
Spanner Size | 22 |
Additionally Required Parts | 11137603830 (2x), 11137603833 (20x) |
Additional Information
Technical Information
New fastening bolts, oil pan gasket and an appropriate sealing compound should be used in case of replacement.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Type | Sensor, exhaust gas temperature |
Cable Length | 235 mm |
Weight | 0.058 kg |
Number of Connectors / Ports | 2 |
Placement on Vehicle | before soot particulate filter |
Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Pump |
Type | Oil Pump |
Weight | 1.09 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.7 kg |
Brake caliper piston diameter | 41 mm |
Function | Brake Caliper |
Type | Brake Caliper |
Paired article numbers | 181543 |
Brake Caliper Type | Brake Caliper (1 piston) |
Material | Cast Iron |
Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Caliper |
Brake caliper piston diameter | 41 mm |
Weight | 2.7 kg |
Type | Brake Caliper |
Paired article numbers | 181542 |
Placement on Vehicle | Rear Axle Right |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.314 kg |
Width | 22 mm |
Outer diameter | 508 mm |
Inner diameter | 460 mm |
Number of Teeth | 167 |
Function | Ring Gear, flywheel |
Type | Ring Gear, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.821 kg |
Paired article numbers | 177099 |
Operating Mode | Electric |
Additional Information | without electric motor |
Placement on Vehicle | Right Front |
Type | Window Regulator |
Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Additional Information 2 | with nut, with bolts/screws |
Thread Size | M20x1,5 |
External Teeth, Wheel Side | 36 |
Weight | 7.250 kg |
Min. Length | 804 mm |
Transmission-side joint diameter | 93.2 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023