Proud to be a UK-based company
Contact us
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Additional Information | with gaskets/seals |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Length | 850 mm |
| Outer diameter | 42 mm |
| Rod/Strut | Push Rod |
| Pipe Diameter | 42 mm |
| Driver Position | for right-hand drive vehicles |
| Cone Size | 31.5 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5, M30 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Placement on Vehicle | Front Axle |
| Length | 728 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 44621 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bolts/screws |
| Additional Information | with rubber mounts, with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (38701)
- 2x Febi Screw (44617)
- 2x Febi Nut (44618)
- 1x Febi Clamping Bolt, ball joint (17532)
- 1x Febi Nut (24361)
£75.03
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 773 mm |
| Min. Length | 480 mm |
| Pipe Diameter | 76 mm. 63 mm |
| Mounting points diameter | 20 mm. 30 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Paired article numbers | 193433 |
| Outer diameter 2 | 153 mm |
| Outer diameter 1 | 72 mm |
| Placement on Vehicle | Front Axle Right |
| Width | 53.7 mm |
| Outer diameter | 100 mm |
| Inner diameter | 29 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Left, Upper |
| Paired article numbers | 176071 |
| Cone Size | 18 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Top fork |
| Function | Shock Absorber, driver cab suspension |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 12.5 mm |
| Max. Length | 380 mm |
| Type | Shock Absorber, driver cab suspension |
| Pipe Diameter | 43 mm |
| External Thread Size | M14 x 2 |
| Min. Length | 278 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Type | Oil Pump |
| Function | Oil Pump |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 225 mm |
| Min. Length | 199 mm |
| Pipe Diameter | 54 mm. 42 mm |
| Mounting points diameter | 14 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| External Teeth, Wheel Side | 30 |
| Thread Size | M30x1,5 |
| Min. Length | 720 mm |
| ABS Ring Diameter | 114 mm |
| Wheel Sided Joint Diameter | 98.1 mm |
| Type | Drive Shaft |
| Transmission-side joint diameter | 89.1 mm |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 30 |
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 27 |
| External Teeth, Diff.Side | 25 |
| Min. Length | 769 mm |
| Wheel Sided Joint Diameter | 84 mm |
| Transmission-side joint diameter | 82 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 76 mm |
| Additional Information 2 | with integrated ABS sensor |
| Bolt Hole Circle Diameter | 114 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information | with rubber mounts |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 193294 |
| Cone Size | 20 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Length | 1420 mm |
| Additional Information 2 | with tensioner element |
| Number of Ribs | 8 |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Track rollers material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (29124)
- 1x Febi Belt Tensioner, v-ribbed belt (21027)
£75.03
Important compatibility info
| Paired article numbers | 181129 |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Material | Sheet Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 144 |
| Function | Timing Chain Kit |
| Timing Chain Size | G53HR |
| for OE number | 11 31 8 618 317 S3 |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (28719)
- 1x Febi Guide, timing chain (30448)
- 1x Febi Guide, timing chain (30453)
- 1x Febi Guide, timing chain (30446)
- 1x Febi Tensioner, timing chain (47638)
£75.04
Important compatibility info
| Function | Shaft Seal, crankshaft |
| Inner diameter | 85 mm |
| Outer diameter | 105 mm |
| Material | PTFE (polytetrafluoroethylene) |
| Width | 160 mm |
| Placement on Vehicle | transmission sided |
| Type | Shaft Seal, crankshaft |
| Additional Information 2 | with flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.04
Important compatibility info
| Width | 82 mm |
| Parameter | 7PK |
| Number of Ribs | 6 |
| Function | Belt Pulley, crankshaft |
| Outer diameter | 169 mm |
| Inner diameter | 32 mm |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.04
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023