Important compatibility info
Operating Mode | Electric |
Paired article numbers | 106071 |
Placement on Vehicle | Right Front |
Function | Window Regulator |
Weight | 1.5 kg |
Type | Window Regulator |
Additional Information | with electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 7.842 kg |
Width | 200 mm |
Material | Steel |
Colour | Black |
Surface | Zinc-coated |
Brake Pad | without lining |
Inner Bow Length | 440 mm |
Function | Brake Shoe |
Additional Information | with fastening/mounting material |
Type | Brake Shoe |
for OE number | 05.091.27.54.2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Brake Shoe (07247)
- 1x Febi Brake Shoe Sleeve (07266)
- 1x Febi Split Pin (07243)
- 2x Febi Circlip, brake anchor pin (07275)
Important compatibility info
Water pump impeller material | Plastic |
Function | Water Pump, engine cooling |
Seal Material | Metal, NBR (nitrile butadiene rubber) |
Additional Information | with gasket/seal |
Material | Cast Steel |
Additional Information 2 | non-switchable water pump |
Type | Water Pump, engine cooling |
Number of Wings | 9 |
Weight | 1.57 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Fan, engine cooling |
Number of Wings | 11 |
Rated Power | 200 W |
Operating Mode | Electric |
Outer diameter | 280 mm |
Width | 70 mm |
Placement on Vehicle | Right |
Weight | 1.65 kg |
Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 36329 |
Inner diameter 1 | 14 mm |
Inner diameter 2 | 14 mm |
Placement on Vehicle | Front Axle Left, Rear |
Weight | 2.93 kg |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
External Thread Size | M14 x 1,5 |
Additional Information 2 | with ball joint |
Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (34175)
- 1x Febi Mounting, control/trailing arm (34176)
- 1x Febi Nut (36331)
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower, Rear |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | 40853 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 3.122 kg |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with fastening/mounting material |
Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (40822)
- 1x Febi Ball Joint (40845)
- 1x Febi Nut (34653)
- 1x Febi Bolt, control arm (40852)
Important compatibility info
Type | Thermostat, coolant |
Opening Temperature | 91 °C |
Outer diameter | 73 mm |
Additional Information 2 | with seal ring |
Weight | 0.21 kg |
Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 3 |
Weight | 0.320 kg |
for OE number | 22448-4M500 |
Type | Ignition Coil |
Function | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 136 mm |
Additional Information | with fastening/mounting material |
Outer diameter | 136 mm |
Additional Information 2 | with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Inner diameter | 37 mm |
Bolt Hole Circle Diameter | 108 mm |
Weight | 2.725 kg |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Replaces | 31686 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Disc |
Minimum thickness | 28 mm |
Bolt Hole Circle Diameter | 154 mm |
Surface | Coated |
Inner diameter | 132 mm |
Brake Disc Thickness | 30.2 mm |
Brake Disc Type | Internally Vented |
Thickness | 90 mm |
Placement on Vehicle | Front Axle |
Outer diameter | 322 mm |
Weight | 14.0 kg |
Rim Hole Number | 8 -Hole |
Internal Thread Size | M14 x 2 |
Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Tensioner, timing chain |
Length | 91 mm |
Function | Tensioner, timing chain |
Outer diameter | 27 mm |
Operating Mode | Hydraulic |
Spanner Size | 17 |
Weight | 0.081 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, Right |
Additional Information | with rubber mounts |
Material | Aluminium |
Steering arm type | Control Arm |
Weight | 2.123 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 194329 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Window Regulator |
Type | Window Regulator |
Operating Mode | Electric |
Paired article numbers | 177098 |
Weight | 0.821 kg |
Placement on Vehicle | Left Front |
Additional Information | without electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Ribs | 7 |
Inner diameter | 17 mm |
Weight | 0.377 kg |
Additional Information 2 | with lid |
Type | Alternator Freewheel Clutch |
Function | Alternator Freewheel Clutch |
Outer diameter | 55 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.4 kg |
Placement on Vehicle | Rear, both sides |
Operating Mode | Mechanical |
Shock Absorber Mounting Type | Top eye, Bottom Yoke |
Max. Length | 297 mm |
Min. Length | 212 mm |
Pipe Diameter | 45 mm |
Mounting points diameter | 14 mm |
Function | Shock Absorber, driver cab suspension |
Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.386 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 59 mm |
Outer diameter | 90 mm |
Inner diameter | 22 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Additional Information 2 | with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (172328)
- 1x Febi Axle Bolt, drive shaft (104750)
Important compatibility info
Additional Information 2 | with seal ring |
Number of Connectors / Ports | 2 |
Weight | 0.750 kg |
for OE number | 009 542 17 18 |
Type | Sender Unit, fuel tank |
Function | Sender Unit, fuel tank |
Screw length below head | 672 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.52 kg |
Operating Mode | Electric |
Voltage | 12 V |
Height | 70 mm |
Function | Fan, engine cooling |
Number of Wings | 11 |
Rated Power | 140 W |
Number of Connectors / Ports | 2 |
Outer diameter | 404 mm |
Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.427 kg |
Function | Timing Chain |
Timing Chain Size | Z67 |
Number of Chain Links | 180 |
Chain Type | Silent Chain, Closed chain |
Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Material | Sheet Steel |
Steering arm type | Control Arm |
Placement on Vehicle | Lower, Rear Axle Left, Rear Axle Right |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Weight | 3.210 kg |
Placement on Vehicle | Front Axle Right, Rear, Lower |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | 38057 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Exhaust Side |
Weight | 0.136 kg |
Type | Control Valve, camshaft adjustment |
Function | Control Valve, camshaft adjustment |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.475 kg |
Width | 42.3 mm |
Outer diameter | 55 mm |
Inner diameter | 17 mm |
Number of Ribs | 6 |
Tightening Torque | 85 Nm |
Function | Alternator Freewheel Clutch |
Additional Information 2 | with lid |
Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Shock Absorber, driver cab suspension |
Max. Length | 378 mm |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Weight | 2.4 kg |
Operating Mode | Mechanical |
Placement on Vehicle | Rear |
Type | Shock Absorber, driver cab suspension |
Piston conrod diameter | 16 mm |
Mounting points diameter | 14 mm |
Min. Length | 332 mm |
Pipe Diameter | 58 mm. 63 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Weight | 0.854 kg |
Steering arm type | Control Arm |
Placement on Vehicle | Rear Axle Left, Upper, Front, Rear Axle Right |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing |
Material | Sheet Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 28 mm |
Material | Aluminium |
Operating Mode | Automatic |
Function | Belt Tensioner, v-ribbed belt |
Weight | 0.907 kg |
Outer diameter | 60 mm |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Automatic |
Width of castor bearing surface | 32 mm |
Function | Belt Tensioner, V-ribbed belt |
Type | Belt Tensioner, V-ribbed belt |
Weight | 1.783 kg |
Outer diameter | 75 mm |
Material | Metal |
Width | 83 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.603 kg |
Length | 1480 mm |
Number of Ribs | 8 |
Function | V-Ribbed Belt Set |
Type | V-Ribbed Belt Set |
Additional Information 2 | with tensioner element |
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (29125)
- 1x Febi Belt Tensioner, v-ribbed belt (21027)
Important compatibility info
Weight | 1.7 kg |
Function | Brake Valve, service brake |
Type | Brake Valve, service brake |
Internal Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Weight | 0.21 kg |
Additional Information 2 | with seal ring |
Opening Temperature | 87 °C |
Outer diameter | 73 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023