Important compatibility info
Outer diameter | 52 mm |
Additional Information 2 | with cable |
Voltage | 12 V |
Operating Mode | Electric |
Number of Connectors / Ports | 2 |
Weight | 0.8 kg |
Pipe Diameter | 8 mm |
Type | Fuel Pump |
Function | Fuel Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Width | 43 mm |
Outer diameter | 266 mm |
Thickness | 73 mm |
Bolt Hole Circle Diameter | 130 mm |
Centering Diameter | 85 mm |
Number of mounting bores | 1 |
Max.skimmed drum measure | 231 mm |
Inner Brake Drum Diameter | 230 mm |
Function | Brake Drum |
Rim Hole Number | 5 -Hole |
Weight | 6.5 kg |
Type | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.125 kg |
Placement on Vehicle | Right |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing Type | with housing |
Type | Mass Air Flow Sensor |
Resistor Type | Hot-wire Sensor |
Function | Mass Air Flow Sensor |
Weight | 0.18 kg |
Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Master Cylinder, clutch |
Type | Master Cylinder, clutch |
Weight | 0.196 kg |
Number of Connectors / Ports | 4 |
Additional Information 2 | with sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Placement on Vehicle | Right |
External Thread Size | M10 x 1,5 |
Weight | 0.620 kg |
for OE number | 22 11 6 856 406 |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.597 kg |
Material | Aluminium |
Inner diameter | 23.81 mm |
Function | Brake Master Cylinder |
Type | Brake Master Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Additional Information | with Split Pin |
Additional Information 2 | with nut |
Thread Size | M24x2,0 |
External Teeth, Wheel Side | 28 |
Weight | 9.354 kg |
External Teeth, Diff.Side | 36 |
Min. Length | 797 mm |
ABS Ring Diameter | 105 mm |
Wheel Sided Joint Diameter | 100 mm |
Transmission-side joint diameter | 92.2 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Inner diameter | 36.6 mm |
Weight | 5.930 kg |
Outer diameter | 87.5 mm |
Function | Wheel Bearing Kit |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 78 mm |
Additional Information | with fastening/mounting material |
Type | Wheel Bearing Kit |
Sealing lip material | NBR (nitrile butadiene rubber) |
Bearing Type | Tapered Roller Bearing |
Outer diameter 1 | 65 mm |
Outer diameter 2 | 210 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.826 kg |
Extra Description | Basic Short Kit |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 138 |
Function | Timing Chain Kit |
Type | Timing Chain Kit |
Timing Chain Size | G53HR |
Replaces | 38195 |
Additional Information | with slide rails, with chain tensioner |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (29867)
- 1x Febi Guide, timing chain (29901)
- 1x Febi Guide, timing chain (29902)
- 1x Febi Guide, timing chain (29903)
- 1x Febi Tensioner, timing chain (47638)
Important compatibility info
Function | Mounting, engine |
Paired article numbers | 180772 |
Placement on Vehicle | Left |
Weight | 2.12 kg |
Bearing/Mounting Type | Hydro Mount |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
Bearing/Mounting Type | Hydro Mount |
Placement on Vehicle | Left |
Weight | 0.84 kg |
Type | Mounting, engine |
for OE number | 22 11 6 862 549 |
External Thread Size | M8 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
Bearing/Mounting Type | Hydro Mount |
Placement on Vehicle | Left |
Weight | 0.600 kg |
External Thread Size | M10 x 1,5 |
Type | Mounting, engine |
for OE number | 22 11 6 856 405 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Weight | 1.050 kg |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Function | Mounting, engine |
Type | Mounting, engine |
Bearing/Mounting Type | Hydro Mount |
Weight | 1.600 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.05 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Outer diameter | 145 mm. 49 mm |
Number of Holes | 6 |
Number of Teeth | 30 |
Type | Wheel Hub |
Function | Wheel Hub |
Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.68 kg |
Paired article numbers | 174782 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Material | Aluminium |
Steering arm type | Control Arm |
Additional Information | with rubber mounts |
Placement on Vehicle | Rear Axle Left, Upper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Weight | 7.550 kg |
Paired article numbers | 174693 |
Steering arm type | Control Arm |
Inner diameter | 16 mm |
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Left, Lower |
Material | Sheet Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with rubber mounts |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 187797 |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Material | Sheet Steel |
Weight | 3.047 kg |
Cone Size | 20 mm |
Cone Size 1 | 15.7 mm |
Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 223 mm |
Height | 55 mm |
Width | 55 mm |
Type | Repair Kit, kingpin |
Function | Repair Kit, kingpin |
Weight | 4.590 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (10557)
Important compatibility info
Type | Fuel filter |
Gasket outer diameter | 109.9 mm |
Weight | 2.410 kg |
Function | Fuel filter |
Filter type | without water separator, Spin-on Filter |
Height | 304 mm |
Outer diameter | 136 mm |
Housing material | Metal |
Internal Thread Size | M39 x 1,5 |
Gasket inner diameter | 98.9 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Surface | Coated |
Function | Timing Belt Kit |
Type | Timing Belt Kit |
Number of Teeth | 122 |
Width | 26.5 mm |
Weight | 0.517 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (14370)
- 1x Febi Tensioner Pulley, timing belt (11559)
Important compatibility info
Extra Description | febi Plus |
Weight | 0.317 kg |
Type | Pipe, EGR valve |
Function | Pipe, EGR valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.35 kg |
Placement on Vehicle | Front Axle Right |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 32071 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.17 kg |
Function | Oil Pump |
Type | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Operating Mode | Mechanical |
Weight | 1.2 kg |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 225 mm |
Min. Length | 199 mm |
Pipe Diameter | 54 mm. 42 mm |
Mounting points diameter | 14 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 9.66 kg |
Length | 915 mm |
Material | Steel |
Function | Centre Rod Assembly |
Pipe Diameter | 40 mm. 50 mm |
Cone Size | 30 mm |
Thickness | 118 mm |
Spanner Size | 36 |
Rod/Strut | Push Rod |
Colour | Black |
Driver Position | for right-hand drive vehicles |
Thread Length | 27.2 mm. 80 mm |
External Thread Size | M24 x 1,5 |
Internal Thread Size | M30 x 1,5 RHT |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 1.021 kg |
Steering arm type | Control Arm |
Material | Aluminium |
Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (45377)
- 1x Febi Nut, stabiliser bar (22264)
Important compatibility info
Number of Connectors / Ports | 9 |
Extra Description | febi Plus |
Weight | 0.056 kg |
for OE number | 55271957 |
Type | Control Unit, glow time |
Function | Control Unit, glow time |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Cone Size | 22 mm |
Additional Information | with lock nut, with rubber mounts |
Paired article numbers | 181051 |
Weight | 7.051 kg |
External Thread Size | M16 x 1,5 |
Material | Sheet Steel |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023