Important compatibility info
| Function | Housing, oil filter |
| Extra Description | febi Plus |
| Type | Housing, oil filter |
| Additional Information | with gasket/seal, with oil filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
| Transmission-side joint diameter | 84.1 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 92.2 mm |
| External Teeth, Wheel Side | 40 |
| External Teeth, Diff.Side | 26 |
| Min. Length | 947 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Cylinder Head, Left |
| Additional Information | with gasket/seal |
| Material | Plastic |
| Paired article numbers | 188253 |
| Colour | Grey |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with bolts/screws, with washers |
| Material | Rubber/Metal |
| Bolt Hole Circle Diameter | 110 mm |
| Function | Joint, propshaft |
| Number of Holes | 6 |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (19795)
- 1x Febi Assembly Kit, propshaft joint (43435)
Important compatibility info
| Additional Information 2 | with seal ring |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Number of Wings | 6 |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M27x1,5 |
| External Teeth, Wheel Side | 30 |
| External Teeth, Diff.Side | 27 |
| Min. Length | 620 mm |
| ABS Ring Diameter | 83 mm |
| Wheel Sided Joint Diameter | 83 mm |
| Transmission-side joint diameter | 79 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 24 mm |
| Number of Teeth | 146 |
| Belts | with rounded tooth profile |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (23445)
- 1x Febi Tensioner Pulley, timing belt (27792)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (27819)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (178777)
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 8 |
| Lock System | with double sealing |
| Placement on Vehicle | Left Rear |
| Additional Information | with adjuster |
| Paired article numbers | 178393 |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 26454 |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 22 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 26453 |
| Cone Size | 22 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Hydraulic |
| Placement on Vehicle | Upper Right |
| Paired article numbers | 12510 |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 18803 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut, with hydro mount, with holder |
| Additional Information 2 | with ball joint |
| Additionally Required Parts | 7 12 9 906 196, 31 10 6 772 199, 31 10 6 757 145 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (12528)
- 1x Febi Mounting, control/trailing arm (18687)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (104977)
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 18802 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with holder, with lock nut, with hydro mount |
| Additional Information 2 | with ball joint |
| Additionally Required Parts | 31 10 6 757 145, 31 10 6 772 199, 7 12 9 906 196 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (12529)
- 1x Febi Mounting, control/trailing arm (18688)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (104977)
Important compatibility info
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Min. Length | 316 mm |
| Max. Length | 379 mm |
| Pipe Diameter | 41.5 mm |
| Mounting points diameter | 12 mm |
| Piston conrod diameter | 40 mm |
| Function | Shock Absorber, driver cab suspension |
| Paired article numbers | 176295 |
| Placement on Vehicle | Front |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Placement on Vehicle | Front Axle |
| Length | 980 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Drive Shaft |
| Function | Drive Shaft |
| Min. Length | 973 mm |
| Additional Information 2 | with nut |
| Thread Size | M27x1,5 |
| External Teeth, Wheel Side | 27 |
| External Teeth, Diff.Side | 30 |
| Placement on Vehicle | Front Axle Right |
| Wheel Sided Joint Diameter | 98 mm |
| Transmission-side joint diameter | 81.5 mm |
| Paired article numbers | 184556 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Teeth | 39 |
| Type | Gear, air compressor |
| Function | Gear, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 617 mm |
| Min. Length | 377 mm |
| Pipe Diameter | 54 mm. 63 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 15 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with dryer |
| Refrigerant | R 134a |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 374 mm |
| Core Width | 583 mm |
| Core Depth | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with dryer |
| Refrigerant | R 134a, R 1234yf |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 619 mm |
| Core Width | 410 mm |
| Core Depth | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 1035 mm |
| Inner length 2 | 955 mm |
| Outer length 1 | 1322 mm |
| Outer length 2 | 1229 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 5WA 199 262 BE |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating pressure to | 3.5 bar |
| Operating Pressure | 10 bar |
| Internal Thread Size | M22 x 1,5 |
| Function | Pressure Limiting Valve |
| Type | Pressure Limiting Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front, Front Axle Left |
| Additional Information | with fastening/mounting material |
| Paired article numbers | 175035 |
| Cone Size | 24 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Additional Information 2 | with bearing, with ball joint |
| Steering arm type | Control Arm |
| Material | Steel |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (174785)
- 1x Febi Screw (37673)
- 1x Febi Nut (34653)
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Right, Front |
| Additional Information 2 | with ball joint, with bearing |
| Additional Information | with fastening/mounting material |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 175034 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 24 mm |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (174786)
- 1x Febi Screw (37673)
- 1x Febi Nut (34653)
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 182030 |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint, with rubber mount |
| Material | Aluminium |
| Placement on Vehicle | Upper, Rear Axle Right, Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 550 mm |
| Width | 250 mm |
| Material | Metal |
| Thickness | 1.4 mm |
| Function | Gasket, cylinder head |
| Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with splash protection cover |
| Placement on Vehicle | Right |
| for OE number | 253 240 11 00 |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Paired article numbers | 177221 |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Paper |
| Type | Water Pump, engine cooling |
| Housing material | Cast Aluminium |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





























