Important compatibility info
Housing Type | with housing |
Type | Mass Air Flow Sensor |
Resistor Type | Hot-wire Sensor |
Function | Mass Air Flow Sensor |
Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 341 mm |
Placement on Vehicle | Lower |
Type | Air Tank, compressed-air system |
Operating Pressure | 20 bar |
Capacity | 5 l |
Material | Steel |
Outer diameter | 154 mm |
Number of Connectors / Ports | 4 |
Internal Thread Size | M22 x 1,5 |
Function | Air Tank, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | Basic Short Kit |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 138 |
Function | Timing Chain Kit |
Type | Timing Chain Kit |
Timing Chain Size | G53HR |
Replaces | 38195 |
Additional Information | with slide rails, with chain tensioner |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (29867)
- 1x Febi Guide, timing chain (29901)
- 1x Febi Guide, timing chain (29902)
- 1x Febi Guide, timing chain (29903)
- 1x Febi Tensioner, timing chain (47638)
Important compatibility info
Placement on Vehicle | Left |
Bearing/Mounting Type | Hydro Mount |
Type | Mounting, engine |
Function | Mounting, engine |
for OE number | 212 240 00 00 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | EGR Valve |
Function | EGR Valve |
Additional Information | with gaskets/seals |
for OE number | 038 131 501 AQ |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Master Cylinder, clutch |
Fill Medium | Brake Fluid |
Bore Diameter | 26 mm |
Function | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | before catalytic converter |
Number of Connectors / Ports | 2 |
Cable Length | 307 mm |
Type | Sensor, exhaust gas temperature |
Function | Sensor, exhaust gas temperature |
External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Sensor, compressed-air system |
Function | Sensor, compressed-air system |
Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 31.5 mm |
Outer diameter | 70 mm |
Operating Mode | Automatic |
Type | Belt Tensioner, v-ribbed belt |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Material | Plastic |
Width of castor bearing surface | 25.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Disc |
Minimum thickness | 28 mm |
Bolt Hole Circle Diameter | 154 mm |
Surface | Coated |
Inner diameter | 132 mm |
Brake Disc Thickness | 30.2 mm |
Brake Disc Type | Internally Vented |
Thickness | 90 mm |
Placement on Vehicle | Front Axle |
Outer diameter | 322 mm |
Rim Hole Number | 8 -Hole |
Internal Thread Size | M14 x 2 |
Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Tilt Pump, driver cab |
Suction side external thread size | M12 x 1,5 |
Pressure side external thread size | M12 x 1,5 |
Number of Connectors / Ports | 2 |
Operating Mode | Manual |
Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 136 mm |
Additional Information 2 | with switch |
Function | Gear Lever Knob |
Type | Gear Lever Knob |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M16 x 1,5 |
Placement on Vehicle | Front Axle Left, Rear |
Material | Aluminium |
Inner diameter | 14 mm |
Steering arm type | Control Arm |
Paired article numbers | 43762 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with lock nut |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Cone Size | 19 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (43759)
- 1x Febi Nut (39976)
Important compatibility info
External Thread Size | M14 x 1,5 |
Placement on Vehicle | Front Axle Left, Rear, Lower |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | 38058 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Placement on Vehicle | Front Axle Right, Rear, Lower |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | 38057 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with lock nut, with rubber mounts |
External Thread Size | M16 x 1,5 |
Placement on Vehicle | Front Axle Right, Rear |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 43761 |
Inner diameter | 14 mm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Cone Size | 19 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (43760)
- 1x Febi Nut (39976)
Important compatibility info
Placement on Vehicle | Lower, Front Axle Left, Front, Front Axle Right |
Material | Aluminium |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Parts Set, maintenance service |
Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Air Filter (28245)
- 1x Febi Oil Filter (24665)
- 1x Febi Fuel filter (24663)
Important compatibility info
Placement on Vehicle | Rear, both sides |
Operating Mode | Mechanical |
Shock Absorber Mounting Type | Top eye, Bottom Yoke |
Max. Length | 297 mm |
Min. Length | 212 mm |
Pipe Diameter | 45 mm |
Mounting points diameter | 14 mm |
Function | Shock Absorber, driver cab suspension |
Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Colour Coding | Green |
Type | EGR Valve |
Function | EGR Valve |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Centre Rod Assembly |
Pipe Diameter | 40 mm |
Rod/Strut | Coupling Rod |
Internal Thread Size | M30 x 1,5 |
Function | Centre Rod Assembly |
Additional Information | with lock nut |
External Thread Size | M24 x 1,5 |
Length | 935 mm |
Extra Description | ProKit |
Cone Size | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Min. Length | 228 mm |
Function | Shock Absorber, driver cab suspension |
Max. Length | 310 mm |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Operating Mode | Mechanical |
Placement on Vehicle | Rear |
Type | Shock Absorber, driver cab suspension |
Mounting points diameter | 12 mm |
Pipe Diameter | 42 mm. 69 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Type | Pipe, EGR valve |
Function | Pipe, EGR valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | 177731 |
Steering arm type | Control Arm |
Additional Information 2 | with ball joint |
Placement on Vehicle | Front Axle Right |
Material | Aluminium |
Additional Information | with lock nut, with hydro mount |
External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (102986)
- 1x Febi Nut (43739)
Important compatibility info
Function | Brake Valve, service brake |
Type | Brake Valve, service brake |
Internal Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Timing Chain |
Timing Chain Size | Z67 |
Number of Chain Links | 180 |
Chain Type | Silent Chain, Closed chain |
Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Chain Links | 94 |
Function | Chain Kit, oil pump drive |
Type | Chain Kit, oil pump drive |
Chain Type | Silent Chain, Closed chain |
Additional Information 2 | Requires special tools for mounting |
Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (45053)
- 1x Febi Chain Tensioner, oil pump drive (177614)
- 1x Febi Guide, timing chain (177314)
- 1x Febi Guide, timing chain (179206)
Important compatibility info
Type | Drive Shaft |
Transmission-side joint diameter | 74.5 mm |
Paired article numbers | 182854 |
Placement on Vehicle | Front Axle Right |
Thread Size | M22x1,5 |
External Teeth, Wheel Side | 26 |
Function | Drive Shaft |
Additional Information 2 | with nut |
Wheel Sided Joint Diameter | 79 mm |
Min. Length | 884 mm |
External Teeth, Diff.Side | 22 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with screw, with seal ring |
Inner diameter | 30 mm |
Number of Ribs | 6 |
Parameter | 7PK |
Type | Belt Pulley, crankshaft |
Function | Belt Pulley, crankshaft |
Outer diameter | 157 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (107196)
- 1x Febi Pulley Bolt (177692)
Important compatibility info
Type | Drive Shaft |
Function | Drive Shaft |
External Teeth, Wheel Side | 31 |
Paired article numbers | 182815 |
Placement on Vehicle | Front Axle Right |
Additional Information 2 | with nut |
Thread Size | M24 x 1,5 |
Transmission-side joint diameter | 88.9 mm |
Wheel Sided Joint Diameter | 98 mm |
External Teeth, Diff.Side | 39 |
Min. Length | 1072 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Drive Shaft |
Function | Drive Shaft |
Transmission-side joint diameter | 100 mm |
Wheel Sided Joint Diameter | 89 mm |
Additional Information 2 | with nut |
Thread Size | M16x1,5 |
External Teeth, Wheel Side | 36 |
Min. Length | 546 mm |
Placement on Vehicle | Front Axle Left |
Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Drive Shaft |
Additional Information 2 | with nut |
Placement on Vehicle | Front Axle Right |
Thread Size | M24x1,5 |
External Teeth, Wheel Side | 28 |
External Teeth, Diff.Side | 37 |
Min. Length | 972 mm |
Wheel Sided Joint Diameter | 98.0 mm |
Transmission-side joint diameter | 88.9 mm |
Type | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Teeth, Wheel Side | 29 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Drive Shaft |
External Teeth, Diff.Side | 27 |
Min. Length | 631 mm |
Wheel Sided Joint Diameter | 100 mm |
Transmission-side joint diameter | 92.6 mm |
Thread Size | M24x1,5 |
Function | Drive Shaft |
Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bolt Hole Circle Diameter | 116 mm |
Type | Wheel Bearing Kit |
Sealing lip material | NBR (nitrile butadiene rubber) |
Width | 90 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Bearing Type | Angular Ball Bearing |
Inner diameter | 30 mm |
Additional Information 2 | with ABS sensor ring |
Outer diameter | 148 mm |
Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with seal ring |
Number of Connectors / Ports | 2 |
for OE number | 009 542 17 18 |
Type | Sender Unit, fuel tank |
Function | Sender Unit, fuel tank |
Screw length below head | 672 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, Left |
Additional Information | with rubber mounts |
Material | Aluminium |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 194333 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, Right |
Additional Information | with rubber mounts |
Material | Aluminium |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 194329 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Additional Information 2 | with screw |
Thread Size | M16x1,5 |
Bolt Hole Circle Diameter | 78 mm |
Bore Diameter | 8.5 mm |
External Teeth, Wheel Side | 36 |
Number of mounting bores | 6 |
Min. Length | 764 mm |
Wheel Sided Joint Diameter | 81.4 mm |
Transmission-side joint diameter | 94 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Water pump impeller material | Plastic |
Function | Water Pump, engine cooling |
Seal Material | Metal, NBR (nitrile butadiene rubber) |
Additional Information | with gasket/seal |
Additional Information 2 | non-switchable water pump |
Type | Water Pump, engine cooling |
Number of Wings | 9 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Paired article numbers | 24546 |
Placement on Vehicle | Front Axle Left, Lower, Rear |
Material | Cast Steel |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (21540)
- 1x Febi Mounting, control/trailing arm (21410)
- 1x Febi Ball Joint (27145)
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower, Rear |
Steering arm type | Control Arm |
Paired article numbers | 24545 |
Material | Cast Steel |
Additional Information 2 | with ball joint |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (21540)
- 1x Febi Mounting, control/trailing arm (21410)
- 1x Febi Ball Joint (27145)
Important compatibility info
Units / Pulleys | incl. tensioner pulley, incl. deflection pulley |
Function | Timing Belt Kit |
Surface | Coated |
Number of Teeth | 131 |
Width | 25 mm |
Type | Timing Belt Kit |
for OE number | 16 06 389 SK |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (23411)
- 1x Febi Tensioner Pulley, timing belt (21652)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (28450)
Important compatibility info
Width | 24 mm |
Number of Teeth | 83 |
Surface | Coated |
Function | Timing Belt Kit |
Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (40563)
- 1x Febi Tensioner Pulley, timing belt (30221)
Important compatibility info
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Placement on Vehicle | Right |
External Thread Size | M10 x 1,5 |
for OE number | 22 11 6 856 406 |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower Right |
Function | Mounting, engine |
Bearing/Mounting Type | Hydro Mount |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 176816 |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Length | 1677 mm |
Placement on Vehicle | Left Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 179988 |
Type | Control/Trailing Arm, wheel suspension |
Material | Sheet Steel |
Placement on Vehicle | Lower, Front Axle Right |
Additional Information | with rubber-metal mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Cone Size | 22 mm |
Paired article numbers | 181052 |
Steering arm type | Control Arm |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Right, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
for OE number | 22 11 6 883 513 |
Bearing/Mounting Type | Hydro Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of mounting bores | 2 |
Function | Brake Disc |
Outer diameter | 312 mm |
Thickness | 63 mm |
Centering Diameter | 61 mm |
Minimum thickness | 26 mm |
Brake Disc Thickness | 28 mm |
Placement on Vehicle | Front Axle |
Rotor Style | Internally Vented |
Surface | Coated |
Bolt Hole Circle Diameter | 108 mm |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023