Important compatibility info
Function | Mounting, engine |
Placement on Vehicle | both sides |
for OE number | 967 241 02 13 |
Weight | 3.434 kg |
External Thread Size | M18 x 1,5 |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.76 kg |
Material | Cast Aluminium |
Number of Teeth | 6 |
Number of Wings | 6 |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Rubber/Metal |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.311 kg |
Placement on Vehicle | Left |
Paired article numbers | 26973 |
Colour | Green |
Bearing/Mounting Type | Hydro Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with rubber mounts |
Weight | 1.853 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Rear, Upper |
Material | Aluminium |
Steering arm type | Control Arm |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.1 kg |
Number of Teeth | 8 |
Voltage | 12 V |
Function | Starter |
Type | Starter |
Rated Power | 0.85 kW |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.150 kg |
Type | Clutch Release Bearing |
Function | Clutch Release Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 3 |
Voltage | 24 V |
Type | Solenoid Valve |
Weight | 0.427 kg |
Function | Solenoid Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner length 2 | 900 mm |
Inner length 1 | 850 mm |
Weight | 0.896 kg |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Outer length 1 | 1117 mm |
Outer length 2 | 1221 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 10.700 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 26454 |
Function | Control/Trailing Arm, wheel suspension |
Cone Size | 22 mm |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 47 mm |
Outer diameter | 165 mm |
Inner diameter | 100 mm |
Bearing Type | Tapered Roller Bearing |
Function | Wheel Bearing |
Weight | 3.891 kg |
Placement on Vehicle | Rear Axle Left, inner, Outer, Rear Axle Right |
Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M16 x 1,5 |
Weight | 2.1 kg |
Placement on Vehicle | Front Axle Right, Lower, Front |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 39979 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing, with ball joint |
Cone Size | 19 mm |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (39978)
- 1x Febi Nut (39976)
Important compatibility info
Weight | 0.566 kg |
Width of castor bearing surface | 29 mm |
Material | Metal |
Outer diameter | 80 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.088 kg |
Width | 25 mm |
Number of Teeth | 137 |
Surface | Coated |
for OE number | 028 198 119 A S1 |
Belts | with rounded tooth profile |
Type | Water Pump & Timing Belt Kit |
Function | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (14630)
- 1x Febi Water Pump, engine cooling (01286)
Important compatibility info
for OE number | C2Z 29118 |
Weight | 1.130 kg |
Additional Information 2 | with lid |
Additional Information | with coolant level sensor |
Type | Expansion Tank, coolant |
Function | Expansion Tank, coolant |
Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front |
Operating Mode | Pneumatic |
Weight | 2.253 kg |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 353 mm |
External Thread Size | M10 x 1 |
Pipe Diameter | 81 mm |
Mounting points diameter | 14 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Min. Length | 276 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with rolling bearing |
Type | Suspension, propshaft |
Function | Suspension, propshaft |
Bearing Type | Rolling Bearing |
Thickness | 182 mm |
Outer diameter | 55 mm |
Inner diameter | 35 mm |
Width | 36 mm |
Weight | 0.39 kg |
Hole Spacing | 163 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M20 x 1,5 |
Driver Position | for right-hand drive vehicles |
Length | 861 mm |
Cone Size | 28.6 mm |
Function | Centre Rod Assembly |
Pipe Diameter | 52 mm |
Rod/Strut | Push Rod |
Outer diameter | 52 mm |
Weight | 9.1 kg |
Extra Description | ProKit |
Internal Thread Size | M30 x 1,5 |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower |
Paired article numbers | 43047 |
Function | Control/Trailing Arm, wheel suspension |
Material | Sheet Steel |
Steering arm type | Control Arm |
Weight | 2.51 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Alternator Freewheel Clutch |
Inner diameter | 17 mm |
Outer diameter | 76 mm |
Weight | 0.6 kg |
Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.112 kg |
for OE number | 24355-23800 |
Number of Connectors / Ports | 2 |
Function | Control Valve, camshaft adjustment |
Extra Description | febi Plus |
Type | Control Valve, camshaft adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023