Proud to be a UK-based company
Contact us
Important compatibility info
| Tensile Cord Material | Aramid |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt Set |
| Length | 1162 mm |
| Number of Ribs | 8 |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | V-Ribbed Belt Set |
| Weight | 1.377 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (184924)
- 1x Febi Belt Tensioner, v-ribbed belt (175906)
£77.91
Important compatibility info
| Operating Mode | Hydraulic |
| Spanner Size | 19 |
| Function | Tensioner, timing chain |
| Weight | 0.160 kg |
| for OE number | 271 050 09 11 |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.91
Important compatibility info
| Type | Shock Absorber |
| Bore Diameter | 14 mm |
| Shock Absorber Design | Suspension Strut |
| External Thread Size | M12 x 1,25 |
| Pipe Diameter | 45 mm |
| Max. Length | 535 mm |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Min. Length | 350 mm |
| Shock Absorber Type | Gas Pressure |
| Piston conrod diameter | 20 mm |
| Mounting bores distance | 60 mm |
| Weight | 3.900 kg |
| Shock Absorber System | Twin-Tube |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.93
Important compatibility info
| External Teeth, Wheel Side | 29 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 8.014 kg |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 27 |
| Min. Length | 631 mm |
| Wheel Sided Joint Diameter | 100 mm |
| Transmission-side joint diameter | 92.6 mm |
| Thread Size | M24x1,5 |
| Function | Drive Shaft |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.96
Important compatibility info
| Type | Starter |
| Weight | 2.989 kg |
| Function | Starter |
| Rated Power | 1.1 kW |
| Number of Teeth | 10 |
| Voltage | 12 V |
| for OE number | 02T 911 024 N |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.96
Important compatibility info
| Function | Oil Separator, crankcase ventilation |
| Number of hoses | 3 |
| Weight | 0.32 kg |
| Extra Description | febi Plus |
| Type | Oil Separator, crankcase ventilation |
| Additional Information | with venting hoses |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Separator, crankcase ventilation (44158)
- 1x Febi Hose, crankcase ventilation (100647)
- 1x Febi Hose, crankcase ventilation (100453)
- 1x Febi Hose, crankcase ventilation (100452)
£77.96
Important compatibility info
| Weight | 1.63 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 212 240 01 00 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.96
Important compatibility info
| Length | 1666 mm |
| Number of Ribs | 7 |
| Weight | 0.970 kg |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Polyester |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (186518)
- 1x Febi Belt Tensioner, v-ribbed belt (36831)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (36826)
£77.96
Important compatibility info
| Function | Oil Pump |
| Type | Oil Pump |
| Weight | 1.75 kg |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.96
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 0.9 kW |
| Weight | 2.86 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.96
Important compatibility info
| Weight | 0.120 kg |
| Number of Connectors / Ports | 3 |
| Cable Length | 545 mm |
| Type | Sensor, crankshaft pulse |
| Function | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.96
Important compatibility info
| Type | Cylinder Head, air compressor |
| Weight | 1.3 kg |
| Function | Cylinder Head, air compressor |
| Additional Information 2 | without spacer plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.96
Important compatibility info
| Weight | 1.82 kg |
| Additional Information | with gaskets/seals |
| Type | Seal Kit, multi-valve |
| Function | Seal Kit, multi-valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.96
Important compatibility info
| Type | Belt Tensioner, v-ribbed belt |
| Weight | 0.731 kg |
| Width of castor bearing surface | 26 mm |
| Width | 43 mm |
| Material | Metal |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Function | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.96
Important compatibility info
| Weight | 2.39 kg |
| Placement on Vehicle | Rear Axle |
| Width | 32 mm |
| Outer diameter | 180 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Function | Brake Shoe Set |
| Piston Diameter | 20.6 mm |
| Type | Brake Shoe Set |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.99
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Weight | 0.119 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 52 |
| Timing Chain Size | G44-AMD1 |
| Type | Chain Kit, oil pump drive |
| Function | Chain Kit, oil pump drive |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (184970)
- 1x Febi Chain Tensioner, oil pump drive (178958)
£78.00
Important compatibility info
| Weight | 0.625 kg |
| Length | 1050 mm |
| Material | Rubber |
| Thickness | 18 mm |
| Function | Gasket, oil sump |
| Type | Gasket, oil sump |
| Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Additional Information | with Thrust Bearing |
| Placement on Vehicle | Front Axle, Right |
| Length | 229 mm |
| Outer diameter | 45 mm |
| Function | Repair Kit, kingpin |
| Weight | 3.66 kg |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (19164)
- 2x Febi Split Sleeve (19162)
- 2x Febi Seal Ring, steering knuckle (19166)
- 1x Febi Seal Ring, steering knuckle (19167)
- 1x Febi Bush, steering knuckle (19168)
- 3x Febi Bush, steering knuckle (19169)
- 1x Febi Spacer Ring (19163)
- 1x Febi Lock Ring, steering knuckle (19165)
£78.00
Important compatibility info
| Weight | 8.4 kg |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
| Length | 910 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30.2 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 50 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Weight | 0.764 kg |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Width of castor bearing surface | 30 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Weight | 2.45 kg |
| Operating Mode | Manual |
| Function | Tilt Pump, driver cab |
| Number of Connectors / Ports | 2 |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Weight | 0.294 kg |
| Type | Tensioner, timing chain |
| Function | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Weight | 2.630 kg |
| Placement on Vehicle | Right Rear |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 339 mm |
| Min. Length | 242 mm |
| Pipe Diameter | 44.5 mm |
| Mounting points diameter | 12 mm |
| Piston conrod diameter | 12.5 mm |
| Function | Shock Absorber, driver cab suspension |
| External Thread Size | M6 x 1 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Weight | 3.660 kg |
| Outer diameter 1 | 62 mm |
| Width | 55 mm |
| Outer diameter | 74 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with integrated ABS sensor |
| Placement on Vehicle | Front Axle Left |
| Outer diameter 2 | 140 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 2 kW |
| Weight | 4.0 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Voltage | 12 V |
| for OE number | 12 41 7 501 738 |
| Weight | 3.9 kg |
| Rated Power | 1.4 kW |
| Type | Starter |
| Number of Teeth | 9 |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 330 mm |
| Thickness | 129 mm |
| Function | Brake Disc |
| Surface | Coated |
| Bolt Hole Circle Diameter | 177 mm |
| Minimum thickness | 26 mm |
| Number of Holes | 8 |
| Brake Disc Type | Internally Vented |
| Brake Disc Thickness | 34 mm |
| Weight | 16.8 kg |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Weight | 1.9 kg |
| Type | Seal Kit, multi-valve |
| Function | Seal Kit, multi-valve |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Thickness | 62.5 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Length | 330 mm |
| Placement on Vehicle | Front Axle |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with rubber-metal mounts |
| Weight | 1.86 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Outer diameter | 327 mm |
| Inner diameter | 217 mm |
| Height | 605 mm |
| Filter type | Filter Insert |
| Weight | 5.570 kg |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023