Important compatibility info
| Paired article numbers | 180543 |
| Additional Information 2 | with ball joint |
| Placement on Vehicle | Front Axle Left, Lower |
| Additional Information | with lock nut, with rubber mounts |
| External Thread Size | M12 x 1,25 |
| Cone Size | 22 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1125 mm |
| Number of Ribs | 7 |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (38434)
- 1x Febi Belt Tensioner, v-ribbed belt (27445)
Important compatibility info
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 1573 mm |
| Inner length 2 | 1252 mm |
| Outer length 1 | 1880 mm |
| Outer length 2 | 1604 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 25 |
| External Teeth, Diff.Side | 33 |
| Min. Length | 916 mm |
| Wheel Sided Joint Diameter | 77.4 mm |
| Transmission-side joint diameter | 75 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Inner diameter | 30 mm |
| Bearing Type | Angular Ball Bearing |
| Outer diameter | 90 mm |
| Placement on Vehicle | Front Axle |
| Width | 44 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 73 mm |
| Number of Ribs | 6 |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 29 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 11 36 8 617 694 |
| Function | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
| Type | Control Valve, camshaft adjustment |
| Placement on Vehicle | Intake Side, Exhaust Side |
| Spanner Size | 22 |
| External Thread Size | M22 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer length 1 | 1164 mm |
| Type | Cable Pull, manual transmission |
| Inner length 1 | 940 mm |
| Function | Cable Pull, manual transmission |
| Inner length 2 | 887 mm |
| Outer length 2 | 1237 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Parts Set, maintenance service |
| Function | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (35395)
- 1x Febi Fuel filter (171330)
- 1x Febi Air Filter (40548)
- 1x Febi Filter, cabin air (23581)
- 1x Febi Air Filter, compressor intake (38976)
Important compatibility info
| Function | Starter |
| Type | Starter |
| Rated Power | 2.0 kW |
| Number of Teeth | 10 |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Control Valve, camshaft adjustment |
| Type | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
| Placement on Vehicle | Intake Side |
| Additional Information | with gasket/seal |
| Additional Information 2 | with screw set |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Paired article numbers | 197780 |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left |
| Paired article numbers | 197779 |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower Front Axle, Left |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 21467 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with holder, with lock nut, with rubber mounts |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (07965)
- 1x Febi Mounting, control/trailing arm (21463)
Important compatibility info
| Colour | Black |
| Function | Steering Column Switch |
| Number of Connectors / Ports | 3 |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, engine |
| Width | 250 mm |
| Placement on Vehicle | Rear, both sides |
| Internal Thread Size | M20 x 2,5 |
| Hole Spacing | 200 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 96 |
| for OE number | 06H 109 158 N S1 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (45955)
- 1x Febi Tensioner, timing chain (46275)
- 1x Febi Guide, timing chain (49535)
- 1x Febi Guide, timing chain (49533)
- 1x Febi Guide, timing chain (49534)
Important compatibility info
| Housing material | Grey Cast Iron |
| Number of Wings | 9 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| for OE number | 904 200 49 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 61 mm |
| Additional Information | with nuts |
| Outer diameter | 93 mm |
| Additional Information 2 | with integrated ABS sensor |
| Inner diameter | 37 mm |
| Outer diameter 1 | 68 mm |
| Outer diameter 2 | 140 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Operating Mode | Manual |
| Number of Connectors / Ports | 2 |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M14 x 1,5 |
| Suction side external thread size | M14 x 1,5 |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front, Right |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with screw |
| Thread Size | M16x1,5 |
| External Teeth, Wheel Side | 37 |
| External Teeth, Diff.Side | 27 |
| Min. Length | 574 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Transmission-side joint diameter | 82 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Bellow, air suspension |
| Thickness | 143 mm. 340 mm |
| Outer diameter | 286 mm. 200 mm |
| External Thread Size | M22 x 1,5, M12 x 1,75 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 345 mm |
| Thickness | 78.2 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 22.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Surface | Coated |
| Mounting points diameter | 14.5 mm |
| Bolt Hole Circle Diameter | 111 mm |
| Centering Diameter | 83 mm |
| Outer diameter | 301 mm |
| Minimum thickness | 27 mm |
| Thickness | 59 mm |
| Brake Disc Thickness | 30 mm |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Rim Hole Number | 9 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right Rear |
| Additional Information | with adjuster |
| Paired article numbers | 197581 |
| Number of Connectors / Ports | 6 |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Right |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 39351 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with holder, with rubber mounts |
| Additional Information 2 | with ball joint |
Additional Information
Technical Information
After mounting the screw of the back-end control arm bush has to be tightened with 55 Nm + 90° + 15°
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (36595)
Important compatibility info
| Width | 47 mm |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 290 mm |
| Thickness | 56.3 mm |
| Inner diameter | 254 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 66 mm |
| Number of mounting bores | 2 |
| Max.skimmed drum measure | 256 mm |
| Rim Hole Number | 5 -Hole |
| Type | Brake Drum |
| Function | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| for OE number | 22 11 6 864 828 |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





























