Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
| External Teeth, Wheel Side | 36 |
| External Teeth, Diff.Side | 26 |
| Min. Length | 581 mm |
| Wheel Sided Joint Diameter | 82.4 mm |
| Transmission-side joint diameter | 82 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.67
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Paired article numbers | 178748 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 44 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.68
Important compatibility info
| Placement on Vehicle | Front Axle, Left |
| Additional Information | with rubber mounts |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 194333 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.68
Important compatibility info
| Width | 41 mm |
| Outer diameter | 59 mm |
| Function | Alternator Freewheel Clutch |
| Inner diameter | 15 mm |
| Number of Ribs | 4 |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.71
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 3 |
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.72
Important compatibility info
| Additional Information 2 | with seal ring |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Number of Wings | 6 |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.72
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Left, Rear |
| Material | Aluminium |
| Inner diameter | 14 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 43762 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with lock nut |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Cone Size | 19 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (43759)
- 1x Febi Nut (39976)
£76.73
Important compatibility info
| Core Length | 387 mm |
| Core Width | 739 mm |
| Function | Condenser, air conditioning |
| Core Depth | 16 mm |
| Type | Condenser, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.73
Important compatibility info
| Placement on Vehicle | Front Axle, Rear Axle |
| Length | 244.5 mm |
| Width | 113.9 mm |
| Brake System | Knorr |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 29.3 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.76
Important compatibility info
| Placement on Vehicle | Left |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 6Q0 199 555 AS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.78
Important compatibility info
| Thickness | 45.2 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 22.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Function | Brake Disc |
| Outer diameter | 330 mm |
| Placement on Vehicle | Front Axle |
| Surface | Coated |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.78
Important compatibility info
| Centering Diameter | 67 mm |
| Surface | Coated |
| Bolt Hole Circle Diameter | 112 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 330 mm |
| Thickness | 46.7 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.79
Important compatibility info
| Placement on Vehicle | Upper, Front Axle Left |
| Additional Information | with lock nut, with rubber mounts |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 198026 |
| Cone Size | 13.5 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 2 | 17 mm |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.79
Important compatibility info
| Transmission Type | 5-Speed Manual Transmission |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 1036 mm |
| Inner length 2 | 955 mm |
| Outer length 1 | 1329 mm |
| Outer length 2 | 1219 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.80
Important compatibility info
| Pressure | 7 bar |
| Type | Oil Pump |
| Function | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.81
Important compatibility info
| Type | Drive Shaft |
| Function | Drive Shaft |
| Transmission-side joint diameter | 100 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Additional Information 2 | with nut |
| Thread Size | M16x1,5 |
| External Teeth, Wheel Side | 36 |
| Min. Length | 546 mm |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.81
Important compatibility info
| Function | Brake Shoe Set |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Placement on Vehicle | Rear Axle |
| Piston Diameter | 19.1 mm |
| Width | 38 mm |
| Outer diameter | 203 mm |
| Type | Brake Shoe Set |
| Additional Information | with accessories, with wheel brake cylinder, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.82
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Paired article numbers | 182583 |
| Bearing/Mounting Type | Hydro Mount |
| for OE number | 22 11 6 860 488 |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.85
Important compatibility info
| External Teeth, Wheel Side | 30 |
| Thread Size | M30x1,5 |
| Min. Length | 720 mm |
| ABS Ring Diameter | 114 mm |
| Wheel Sided Joint Diameter | 98.1 mm |
| Type | Drive Shaft |
| Transmission-side joint diameter | 89.1 mm |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 30 |
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.86
Important compatibility info
| Replaces | 19461 |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Placement on Vehicle | both sides |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.87
Important compatibility info
| Function | Shock Absorber, driver cab suspension |
| Mounting points diameter | 12 mm |
| Piston conrod diameter | 19 mm |
| Pipe Diameter | 70 mm. 42 mm |
| Max. Length | 380 mm |
| Min. Length | 320 mm |
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Paired article numbers | 24419 |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.87
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 356 mm |
| Thickness | 36.3 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.87
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 350 mm |
| Thickness | 62 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 18 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.87
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 953 mm |
| Outer diameter | 52.0 mm |
| Rod/Strut | Push Rod |
| Outer thread | M24 x 1,5 mm |
| Colour | red/brown |
| Driver Position | for left-hand drive vehicles |
| Weight | 10.000 kg |
| Inner thread | M30 x 1,5 mm |
| Cone Size | 30 mm |
| Pipe Diameter | 52 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
£76.93
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.94
Important compatibility info
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 630 mm |
| Min. Length | 399 mm |
| Stroke | 231 mm |
| Pipe Diameter | 32 mm. 28 mm |
| Piston conrod diameter | 15 mm |
| Function | Shock Absorber, steering |
| Type | Shock Absorber, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.96
Important compatibility info
| Mounting bores distance | 78 mm |
| Internal Thread Size | M16 x 1,5 |
| Function | Solenoid Valve, shift cylinder |
| Type | Solenoid Valve, shift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.96
Important compatibility info
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Thickness | 380 mm |
| Outer diameter | 228 mm. 130 mm |
| Additional Information | without piston |
| Placement on Vehicle | Front Axle Left |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.96
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Teeth | 6 |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber/Metal |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.97
Important compatibility info
| Placement on Vehicle | Left |
| Width | 60 mm |
| Outer diameter | 383 mm |
| Operating Mode | Electric |
| Rated Power | 400 W |
| Number of Wings | 11 |
| Function | Fan, engine cooling |
| Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.97
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023