Important compatibility info
| Number of Connectors / Ports | 4 |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 29 mm. 40 mm |
| Outer diameter | 166 mm. 152 mm |
| Inner diameter | 31 mm. 57 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Additional Information 2 | with screw |
| Type | Belt Pulley, crankshaft |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (31483)
- 1x Febi Pulley Bolt (33697)
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 618 mm |
| Min. Length | 385 mm |
| Pipe Diameter | 73 mm. 63.5 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thread Type | with right-hand thread |
| Cone Size | 28.6 mm |
| Length | 1728 mm |
| Rod/Strut | Guide Rod |
| Placement on Vehicle | Front Axle |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M20 x 1,5 |
| Pipe Diameter | 48 mm |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with dryer |
| for OE number | 1 710 241 |
| Refrigerant | R 134a |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 471 mm |
| Core Width | 602 mm |
| Core Depth | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 25 |
| External Teeth, Diff.Side | 24 |
| Min. Length | 935 mm |
| Wheel Sided Joint Diameter | 84 mm |
| Transmission-side joint diameter | 82 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Cable Pull, manual transmission |
| Outer Length | 3371 mm |
| Inner Length | 2940 mm |
| Type | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right, Upper |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 39840 |
| Additional Information | with lock nut, with rubber mounts |
| External Thread Size | M10 x 1,5 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 39 mm |
| Outer diameter | 110 mm |
| Inner diameter | 55 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing |
| Function | Wheel Bearing |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Vehicle Equipment | for vehicles with electric parking brake |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Placement on Vehicle | Rear Axle Left |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 44 mm |
| Paired article numbers | 186528 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Function | Brake Caliper |
| Paired article numbers | 186527 |
| Material | Cast Iron |
| Brake caliper piston diameter | 44 mm |
| Type | Brake Caliper |
| Vehicle Equipment | for vehicles with electric parking brake |
| Additional Information | with electric motor |
| Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 5 |
| Housing Type | with housing |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| for OE number | 113 094 00 48 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Automatic |
| Width of castor bearing surface | 30 mm |
| Material | Metal |
| Type | Belt Tensioner, v-ribbed belt |
| Function | Belt Tensioner, V-ribbed belt |
| Outer diameter | 65 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| External Thread Size | M18 x 1,5 |
| Length | 1620 mm |
| Rod/Strut | Push Rod |
| Cone Size | 22 mm |
| Pipe Diameter | 36 mm |
| Internal Thread Size | M28 x 1,5 RHT, M28 x 1,5 LHT |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing material | Grey Cast Iron |
| Number of Wings | 8 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 5 |
| Type | Quick Release Valve |
| Function | Quick Release Valve |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 4 |
| Type | Sensor, urea supply |
| Function | Sensor, urea supply |
| Screw length below head | 515 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with rubber mounts |
| Material | Cast Steel |
| Placement on Vehicle | Front Axle Right, Lower |
| Steering arm type | Control Arm |
| Paired article numbers | 38285 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| not for OE number | 7H8 407 152 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (38282)
- 1x Febi Mounting, control/trailing arm (28335)
- 1x Febi Mounting, control/trailing arm (26573)
Important compatibility info
| Additional Information | with rubber mounts |
| Material | Cast Steel |
| Placement on Vehicle | Front Axle Left, Lower |
| Steering arm type | Control Arm |
| Paired article numbers | 38284 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| not for OE number | 7H8 407 151 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (38283)
- 1x Febi Mounting, control/trailing arm (28335)
- 1x Febi Mounting, control/trailing arm (26573)
Important compatibility info
| Function | Diaphragm Brake Cylinder |
| Distance of fastening bolts | 120 mm |
| Piston Rod Length | 15 mm |
| Parameter | Typ 16 / 24 |
| Brake Type | Disc Brake |
| Additional Information | with fastening/mounting material |
| Type | Diaphragm Brake Cylinder |
| Stroke | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 31 mm |
| Outer diameter | 120 mm |
| Inner diameter | 11 mm |
| Number of Teeth | 40 |
| Additional Information 2 | with nut |
| Function | Gear/Sprocket, camshaft |
| Adjustable | Adjustable |
| Extra Description | febi Plus |
| Type | Gear/Sprocket, camshaft |
| Engine Management | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 11 36 8 617 694 |
| Function | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
| Type | Control Valve, camshaft adjustment |
| Placement on Vehicle | Intake Side, Exhaust Side |
| Spanner Size | 22 |
| External Thread Size | M22 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Electronic |
| Type | Accelerator Pedal |
| Function | Accelerator Pedal |
| for OE number | 970 300 03 04 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M16 x 1,5, M16 x 2 |
| Function | Bellow, air suspension |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 260 mm |
| Additional Information | with piston |
| Outer diameter | 228 mm. 170 mm |
| Thickness | 137 mm |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Additional Information | with nuts |
| Rod/Strut | Push Rod |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 46 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
| for turbocharger (art. no.) | 186662 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with fastening/mounting material, without electric motor |
| Placement on Vehicle | Left Rear |
| Operating Mode | Electric |
| Paired article numbers | 179231 |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Window Regulator |
| Type | Window Regulator |
| Paired article numbers | 179232 |
| Placement on Vehicle | Right Rear |
| Additional Information | with fastening/mounting material, without electric motor |
| Operating Mode | Electric |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 82 mm |
| Outer diameter | 169 mm |
| Inner diameter | 32 mm |
| Function | Belt Pulley, crankshaft |
| Parameter | 7 PK |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
| Additional Information 2 | with spacer disc, with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (108069)
- 1x Febi Centering Bolt, crankshaft pulley (33626)
- 1x Febi Washer, crankshaft pulley (33599)
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 76 |
| Function | Chain Kit, oil pump drive |
| Type | Chain Kit, oil pump drive |
| Timing Chain Size | G53HR, G53HP |
| Wet Boiling Point | 55 °C |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (25229)
- 1x Febi Chain Tensioner, oil pump drive (25180)
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





























