Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Length | 629 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1272 mm |
| Rod/Strut | Guide Rod |
| Driver Position | for right-hand drive vehicles |
| Cone Size | 27 mm. 30 mm |
| Pipe Diameter | 62 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| External Thread Size | M14 x 1,5, M12 x 1,5 |
| Operating Mode | Manual |
| Number of Connectors / Ports | 2 |
| Type | Tilt Pump, driver cab |
| Function | Tilt Pump, driver cab |
| Hole Spacing | 85 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 426 mm |
| Min. Length | 372 mm |
| Pipe Diameter | 45 mm |
| Mounting points diameter | 20 mm. 32 mm |
| Piston conrod diameter | 18 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| Replaces | 102018 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| Internal Thread Size | M30 x 1,5 |
| External Thread Size | M24 x 1,5 |
| Additional Information | with lock nut |
| Length | 895 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 42 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| Function | Wheel Bearing Kit |
| Outer diameter 2 | 154 mm |
| Outer diameter 1 | 72 mm |
| Width | 48.5 mm |
| Outer diameter | 92 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Inner diameter | 30 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 379 mm |
| Paired article numbers | 176304 |
| Operating Mode | Mechanical |
| Min. Length | 218 mm |
| Pipe Diameter | 42 mm. 101 mm |
| Mounting points diameter | 12 mm |
| Placement on Vehicle | Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| Number of Connectors / Ports | 13 |
| Combi Switch Function | with wipe interval function, with wipe-wash function, with board computer function, with rear wipe-wash function |
| Type | Steering Column Switch |
| Function | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| Diameter | 71 mm |
| Length | 358 mm |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Additional Information | with rubber-metal mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Transmission-side joint diameter | 108 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 98 mm |
| Min. Length | 608 mm |
| Number of mounting bores | 6 |
| External Teeth, Wheel Side | 36 |
| Bore Diameter | 10.5 mm |
| Bolt Hole Circle Diameter | 94 mm |
| Thread Size | M16x1,5 |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 37 |
| External Teeth, Wheel Side | 27 |
| Thread Size | M24x1,5 |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Left |
| Transmission-side joint diameter | 89 mm |
| Min. Length | 640 mm |
| Wheel Sided Joint Diameter | 98 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M33x1,5 |
| Wheel Sided Joint Diameter | 112 mm |
| Transmission-side joint diameter | 103.5 mm |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 41 |
| Min. Length | 1086 mm |
| External Teeth, Wheel Side | 35 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| External Teeth, Wheel Side | 28 |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M24x2,0 |
| External Teeth, Diff.Side | 36 |
| Min. Length | 1053 mm |
| ABS Ring Diameter | 105 mm |
| Wheel Sided Joint Diameter | 104.7 mm |
| Transmission-side joint diameter | 91 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| for OE number | 936 130 12 15 SK5 |
| Type | Sealing Set, air compressor |
| Function | Sealing Set, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| Placement on Vehicle | Front Axle, outer |
| Length | 980 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Pipe Diameter | 52 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Brake Type | Drum Brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| Additional Information 2 | with dryer |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 391 mm |
| Core Width | 647 mm |
| Core Depth | 16 mm |
| Refrigerant | R 134a |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M18x1,5 |
| External Teeth, Wheel Side | 27 |
| External Teeth, Diff.Side | 39 |
| Min. Length | 986 mm |
| Wheel Sided Joint Diameter | 90.9 mm |
| Transmission-side joint diameter | 87 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| Outer diameter | 75 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| for OE number | 906 200 22 70 |
| Width of castor bearing surface | 38 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| Function | Joint, propshaft |
| Bolt Hole Circle Diameter | 105 mm |
| Additional Information | with nuts |
| Number of Holes | 6 |
| Extra Description | ProKit |
| Additional Information 2 | with bolts/screws |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Assembly Kit, propshaft joint (43515)
£86.92
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Width | 25.4 mm |
| Number of Teeth | 137 |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Water Pump, engine cooling (09757)
- 1x Febi Timing Belt Kit (14626)
£86.92
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023