Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 1.94 kg |
| Additional Information 2 | with bolts/screws, with washers |
| Material | Rubber/Metal |
| Bolt Hole Circle Diameter | 110 mm |
| Function | Joint, propshaft |
| Number of Holes | 6 |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (19795)
- 1x Febi Assembly Kit, propshaft joint (43435)
£81.96
Important compatibility info
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Function | Tie Rod |
| Placement on Vehicle | Front Axle, Centre |
| Additional Information 2 | with crown nut |
| Length | 1605 mm |
| Type | Tie Rod |
| Pipe Diameter | 40 mm |
| Weight | 9.010 kg |
| Cone Size | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Max. Length | 326 mm |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
| Mounting points diameter | 12 mm |
| Min. Length | 171 mm |
| Pipe Diameter | 41 mm. 101 mm |
| Weight | 3.8 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Operating Mode | Mechanical |
| Placement on Vehicle | Rear |
| Paired article numbers | 178446 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Length | 248 mm |
| Outer diameter | 165 mm |
| Weight | 7.02 kg |
| Function | Suspension Spring |
| Number of Coils | 6 |
| Placement on Vehicle | Rear Axle |
| Wire Diameter | 22 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Number of Wings | 10 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Paper, Rubber |
| Material | Grey Cast Iron |
| Weight | 5.1 kg |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M18x1,5 |
| External Teeth, Wheel Side | 25 |
| Weight | 4.534 kg |
| External Teeth, Diff.Side | 22 |
| Min. Length | 640 mm |
| Wheel Sided Joint Diameter | 80 mm |
| Transmission-side joint diameter | 69 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| Weight | 7.760 kg |
| External Teeth, Diff.Side | 37 |
| External Teeth, Wheel Side | 27 |
| Thread Size | M24x1,5 |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Left |
| Transmission-side joint diameter | 89 mm |
| Min. Length | 640 mm |
| Wheel Sided Joint Diameter | 98 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 24 mm |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M16 x 1,5 |
| Steering arm type | Control Arm |
| Weight | 1.941 kg |
| Additional Information 2 | with ball joint |
| Material | Aluminium |
| Placement on Vehicle | Rear, Lower, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Type | Drive Shaft |
| Transmission-side joint diameter | 101.5 mm |
| Wheel Sided Joint Diameter | 98 mm |
| External Teeth, Diff.Side | 26 |
| Min. Length | 860 mm |
| Function | Drive Shaft |
| Weight | 10.004 kg |
| External Teeth, Wheel Side | 38 |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| Paired article numbers | 182112 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Track rollers material | Metal |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Outer diameter | 74 mm |
| Function | Belt Tensioner, v-ribbed belt |
| Weight | 1.62 kg |
| Type | Belt Tensioner, v-ribbed belt |
| for OE number | 5 0407 2744 |
| Width of castor bearing surface | 39 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Length | 1675 mm |
| Number of Ribs | 7 |
| Weight | 0.962 kg |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Polyester |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (180079)
- 1x Febi Belt Tensioner, v-ribbed belt (36831)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (36826)
£81.96
Important compatibility info
| Paired article numbers | 177970 |
| Weight | 0.166 kg |
| Extra Description | febi Plus |
| Function | Control Valve, camshaft adjustment |
| Type | Control Valve, camshaft adjustment |
| Placement on Vehicle | Intake Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Additional Information | with slide rails, with chain tensioner |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 138 |
| Weight | 0.95 kg |
| Function | Timing Chain Kit |
| Replaces | 38196 |
| Type | Timing Chain Kit |
| Timing Chain Size | G53HR |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (29867)
- 1x Febi Tensioner, timing chain (21275)
- 1x Febi Guide, timing chain (29534)
- 1x Febi Guide, timing chain (29535)
£81.96
Important compatibility info
| Extra Description | febi Plus |
| Function | Control Valve, camshaft adjustment |
| for OE number | 271 050 05 78 |
| Type | Control Valve, camshaft adjustment |
| Weight | 0.106 kg |
| Placement on Vehicle | Exhaust Side, Intake Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Weight | 3.43 kg |
| Placement on Vehicle | Front |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 420 mm |
| Min. Length | 315 mm |
| Pipe Diameter | 82 mm. 44 mm |
| Mounting points diameter | 20 mm. 32 mm |
| Piston conrod diameter | 13 mm |
| Function | Shock Absorber, driver cab suspension |
| External Thread Size | M6 x 1 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Transmission-side joint diameter | 108 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 98 mm |
| Min. Length | 608 mm |
| Number of mounting bores | 6 |
| Weight | 6.830 kg |
| External Teeth, Wheel Side | 36 |
| Bore Diameter | 10.5 mm |
| Bolt Hole Circle Diameter | 94 mm |
| Thread Size | M16x1,5 |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Weight | 2.56 kg |
| Placement on Vehicle | Right |
| Operating Mode | Manual |
| Number of Connectors / Ports | 2 |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M14 x 1,5 |
| Suction side external thread size | M14 x 1,5 |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Outer diameter | 73 mm |
| Number of Ribs | 6 |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Weight | 0.54 kg |
| Width of castor bearing surface | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Function | Solenoid Valve, shift cylinder |
| Number of Holes | 2 |
| Type | Solenoid Valve, shift cylinder |
| Weight | 0.319 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information | with rubber mounts, with lock nut |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 184530 |
| Weight | 6.864 kg |
| Cone Size | 16 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 2 | 24 mm |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Weight | 0.385 kg |
| Additional Information 2 | Requires special tools for mounting |
| Function | Timing Chain |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 152 |
| Type | Timing Chain |
| Number of markings | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Width | 27 mm |
| Parameter | 7PK |
| Function | Belt Pulley, crankshaft |
| Number of Ribs | 6 |
| Inner diameter | 15 mm |
| Outer diameter | 155 mm. 30 mm |
| Thickness | 60 mm |
| Type | Belt Pulley, crankshaft |
| Weight | 2.580 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.97
Important compatibility info
| Weight | 0.767 kg |
| Belts | with trapezoidal tooth profile |
| Number of Teeth | 194 |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (47728)
- 1x Febi Tensioner Pulley, timing belt (10298)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (23654)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (178793)
£81.97
Important compatibility info
| Weight | 0.950 kg |
| Function | Clutch, radiator fan |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.97
Important compatibility info
| for OE number | 213 240 06 00 |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 1.440 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.97
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 2.39 kg |
| Paired article numbers | 177731 |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint |
| Placement on Vehicle | Front Axle Right |
| Material | Aluminium |
| Additional Information | with hydro mount, with lock nut |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (102986)
- 1x Febi Nut (43739)
£81.99
Important compatibility info
| Chain Type | Duplex, with chain lock |
| Number of Chain Links | 110 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | D67HP |
| Weight | 1.444 kg |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Guide, timing chain (19079)
- 1x Febi Guide, timing chain (19078)
- 1x Febi Guide, timing chain (19077)
- 1x Febi Timing Chain (25211)
- 1x Febi Tensioner, timing chain (17773)
£81.99
Important compatibility info
| Weight | 0.230 kg |
| Operating Mode | Hydraulic |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.00
Important compatibility info
| Weight | 0.839 kg |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Upper, Lower |
| Type | Mounting and Bolting Kit, control/trailing arm |
| Function | Mounting and Bolting Kit, control/trailing arm |
| for OE number | 110 586 00 33 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Nut (01031)
- 2x Febi Springwasher (01075)
- 2x Febi Camber Correction Screw (01248)
- 2x Febi Camber Correction Screw (01249)
- 2x Febi Mounting, control/trailing arm (01400)
- 2x Febi Eccentric Bush, steering knuckle (01401)
- 2x Febi Castle Nut (01402)
- 2x Febi Camber Correction Screw (01403)
- 2x Febi Washer (01404)
- 8x Febi Seal Ring, steering knuckle (01405)
- 2x Febi Split Pin (01710)
£82.05
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 8 |
| Rated Power | 0.7 kW |
| Weight | 3.0 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.07
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023