Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 27 |
| Weight | 5.561 kg |
| External Teeth, Diff.Side | 23 |
| Min. Length | 655 mm |
| Wheel Sided Joint Diameter | 82.4 mm |
| Transmission-side joint diameter | 75 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Cone Size | 28.6 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Pipe Diameter | 40 mm |
| Width | 40 mm |
| Thickness | 115 mm |
| Length | 743 mm |
| Weight | 7.05 kg |
| Internal Thread Size | M30 x 1,5 RHT |
| Function | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5 |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Pipe Diameter | 40 mm |
| Rod/Strut | Push Rod |
| Length | 850 mm |
| Function | Centre Rod Assembly |
| Cone Size | 26 mm |
| Weight | 7.2 kg |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Length | 809 mm |
| Outer diameter | 50 mm |
| Rod/Strut | Push Rod |
| Weight | 8.355 kg |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Function | Centre Rod Assembly |
| Cone Size | 30 mm |
| Pipe Diameter | 50 mm |
| Additional Information | with castellated nut and split pins |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Combi Switch Function | with indicator function, with wipe-wash function, with high beam function |
| Function | Steering Column Switch |
| Weight | 0.403 kg |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Weight | 0.14 kg |
| Colour | Black |
| Number of Connectors / Ports | 4 |
| Combi Switch Function | with wipe-wash function, with rear wipe-wash function, with wipe interval function |
| Type | Steering Column Switch |
| Function | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Weight | 4.1 kg |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Paired article numbers | 179736 |
| Placement on Vehicle | Front |
| Max. Length | 372 mm |
| Pipe Diameter | 45 mm |
| Mounting points diameter | 14 mm. 35 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Function | Centre Rod Assembly |
| Cone Size | 31.5 mm |
| Driver Position | for right-hand drive vehicles |
| Rod/Strut | Push Rod |
| Outer diameter | 50 mm |
| Length | 823 mm |
| Weight | 8.3 kg |
| Pipe Diameter | 50 mm |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5, M30 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Weight | 1.7 kg |
| Placement on Vehicle | Rear |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 310 mm |
| Min. Length | 224 mm |
| Pipe Diameter | 38 mm. 52 mm |
| Mounting points diameter | 12 mm |
| Piston conrod diameter | 12.5 mm |
| Function | Shock Absorber, driver cab suspension |
| Replaces | 45924 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Weight | 4.574 kg |
| Bearing Type | Angular Ball Bearing |
| Inner diameter | 34 mm |
| Placement on Vehicle | Front Axle |
| Width | 92 mm |
| Additional Information | with fastening/mounting material |
| Outer diameter | 102 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Weight | 0.590 kg |
| Placement on Vehicle | Right Rear |
| Operating Mode | Electric |
| Paired article numbers | 27347 |
| Function | Window Regulator |
| Type | Window Regulator |
| Additional Information | without electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Weight | 0.590 kg |
| Placement on Vehicle | Left Rear |
| Operating Mode | Electric |
| Paired article numbers | 27348 |
| Function | Window Regulator |
| Type | Window Regulator |
| Additional Information | without electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Weight | 0.217 kg |
| Number of Connectors / Ports | 3 |
| Type | Level switch, condensation water level |
| Function | Level switch, condensation water level |
| Cable Length | 850 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Weight | 2.025 kg |
| for OE number | 11 21 000 62R |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.99
Important compatibility info
| Number of Connectors / Ports | 4 |
| Ignition Coil | 4 Spark |
| Fastening Type | Four-point attachment |
| Function | Ignition Coil |
| Weight | 0.831 kg |
| Type | Ignition Coil |
| Additional Information 2 | with plug, with cable |
| for OE number | 82 00 360 911 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.99
Important compatibility info
| Weight | 4.340 kg |
| Placement on Vehicle | Lower Front Axle, Right |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 21466 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut, with rubber mounts, with holder |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (07966)
- 1x Febi Mounting, control/trailing arm (21464)
£79.99
Important compatibility info
| Outer diameter | 118 mm |
| Type | Filter, crankcase ventilation |
| Function | Filter, crankcase ventilation |
| Height | 138 mm |
| Additional Information | with gasket/seal |
| Weight | 0.230 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.02
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 2.39 kg |
| Paired article numbers | 177731 |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint |
| Placement on Vehicle | Front Axle Right |
| Material | Aluminium |
| Additional Information | with hydro mount, with lock nut |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (102986)
- 1x Febi Nut (43739)
£80.04
Important compatibility info
| Width | 24 mm |
| Number of Teeth | 146 |
| Belts | with rounded tooth profile |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
| Weight | 1.030 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (23445)
- 1x Febi Tensioner Pulley, timing belt (27792)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (27819)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (178777)
£80.04
Important compatibility info
| Type | Centre Rod Assembly |
| Length | 1023 mm |
| Placement on Vehicle | Front Axle |
| Rod/Strut | Push Rod |
| Function | Centre Rod Assembly |
| Adjustable | Adjustable on both sides |
| Weight | 8.800 kg |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
| Pipe Diameter | 42 mm |
| External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.05
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023