Proud to be a UK-based company
Contact us
Important compatibility info
| Width | 143 mm |
| Outer diameter | 84 mm |
| Bearing Type | Angular Ball Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.86
Important compatibility info
| Type | Oil Cooler, engine oil |
| Core Width | 76 mm |
| Function | Oil Cooler, engine oil |
| Core Length | 149 mm |
| Core Depth | 75 mm |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.86
Important compatibility info
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.86
Important compatibility info
| Function | Timing Belt Kit |
| Width | 21 mm |
| Number of Teeth | 110 |
| Type | Timing Belt Kit |
| for OE number | 11 31 1 734 608 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (11024)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (02560)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (02561)
- 1x Febi Tensioner Pulley, timing belt (03370)
£87.86
Important compatibility info
| Placement on Vehicle | before soot particulate filter |
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.89
Important compatibility info
| Parameter | VL120R |
| Function | Clutch, radiator fan |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Placement on Vehicle | Lower Front Axle, Left |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 21740 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut |
| Additional Information 2 | with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (21735)
£87.90
Important compatibility info
| Number of Wings | 4 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Housing material | Cast Aluminium |
| for OE number | 104 200 33 01 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Placement on Vehicle | Rear |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 13 mm |
| Function | Shock Absorber, driver cab suspension |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 329 mm |
| Min. Length | 253 mm |
| Pipe Diameter | 44 mm. 53 mm |
| External Thread Size | M10 x 1 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Sensor, engine oil level |
| Material | Plastic |
| Colour | Black |
| Additional Information | with gasket/seal |
| Extra Description | febi Plus |
| Type | Sensor, engine oil level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Function | Clutch Release Bearing |
| Type | Clutch Release Bearing |
| Additional Information 2 | with mounting kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clutch Release Bearing (105416)
- 1x Febi Repair Kit, clutch release bearing (105270)
£87.90
Important compatibility info
| Function | Clutch Release Bearing |
| Type | Clutch Release Bearing |
| Additional Information 2 | with mounting kit |
| for OE number | 20571928 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1340 mm |
| Rod/Strut | Push Rod |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 |
| External Thread Size | M20 x 1,5 |
| Cone Size | 26 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 40 mm |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Function | EGR Valve |
| Placement on Vehicle | Right |
| Additional Information | with gaskets/seals |
| Type | EGR Valve |
| Paired article numbers | 174957 |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Function | Belt Tensioner, V-ribbed belt |
| Type | Belt Tensioner, V-ribbed belt |
| Operating Mode | Automatic |
| Material | Metal |
| Width | 86 mm |
| Outer diameter | 75 mm |
| Width of castor bearing surface | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Additional Information | with fastening/mounting material, without electric motor |
| Placement on Vehicle | Left Rear |
| Operating Mode | Electric |
| Paired article numbers | 179231 |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Function | Window Regulator |
| Type | Window Regulator |
| Paired article numbers | 179232 |
| Placement on Vehicle | Right Rear |
| Additional Information | with fastening/mounting material, without electric motor |
| Operating Mode | Electric |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Extra Description | ProKit |
| Placement on Vehicle | Front Axle |
| Length | 895 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Cone Size | 22 mm |
| Pipe Diameter | 38 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| External Thread Size | M18 x 1,5, M30 x 1,5 LHT |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Thread Size | M22x1,5 |
| External Teeth, Diff.Side | 34 |
| Transmission-side joint diameter | 79 mm |
| Min. Length | 591 mm |
| External Teeth, Wheel Side | 26 |
| Additional Information 2 | with nut |
| Wheel Sided Joint Diameter | 82.1 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Thread Size | M10x1,5 |
| Additional Information 2 | with screw |
| External Teeth, Diff.Side | 26 |
| Min. Length | 943 mm |
| Wheel Sided Joint Diameter | 82 mm |
| External Teeth, Wheel Side | 36 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 82 mm |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Type | Drive Shaft |
| Transmission-side joint diameter | 75.3 mm |
| Function | Drive Shaft |
| Paired article numbers | 183389 |
| Thread Size | M22x1,5 |
| Wheel Sided Joint Diameter | 84 mm |
| Min. Length | 956 mm |
| External Teeth, Diff.Side | 25 |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| External Teeth, Wheel Side | 27 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Type | Drive Shaft |
| Transmission-side joint diameter | 81 mm |
| Wheel Sided Joint Diameter | 91 mm |
| Min. Length | 960 mm |
| Thread Size | M10x1,5 |
| External Teeth, Wheel Side | 36 |
| External Teeth, Diff.Side | 26 |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with screw |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Transmission-side joint diameter | 77 mm |
| Paired article numbers | 183590 |
| External Teeth, Wheel Side | 23 |
| External Teeth, Diff.Side | 26 |
| Min. Length | 624 mm |
| Wheel Sided Joint Diameter | 79 mm |
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Thread Size | M20x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 9 |
| Rated Power | 1 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 11 |
| Rated Power | 1.5 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Type | Electric Motor, window regulator |
| Additional Information 2 | with bolts/screws |
| Number of Connectors / Ports | 6 |
| Placement on Vehicle | Left |
| Function | Electric Motor, window regulator |
| Paired article numbers | 179337 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Placement on Vehicle | non-steered leading axle |
| Function | Bellow, air suspension |
| External Thread Size | M16 x 1,5, M24 x 1,5, M10 x 1,5 |
| Outer diameter | 229 mm. 198 mm |
| Thickness | 249 mm. 565 mm |
| Type | Bellow, air suspension |
| Additional Information | with piston, with piston rod |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Operating Mode | Mechanical |
| Placement on Vehicle | Rear |
| Type | Shock Absorber, driver cab suspension |
| Piston Diameter | 12 mm |
| Mounting points diameter | 14 mm |
| Min. Length | 284 mm |
| Pipe Diameter | 51 mm. 44.5 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Function | Shock Absorber, driver cab suspension |
| Max. Length | 364 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Voltage | 24 V |
| Number of Connectors / Ports | 5 |
| Additional Information 2 | with bolts/screws, with nut, with cable |
| Type | Wiper Motor |
| Function | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023