Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 181745 |
| Material | Aluminium |
| Additional Information 2 | without ball joint |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.89
Important compatibility info
| for OE number | 24321-03000 S2 |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 160 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (176113)
- 1x Febi Tensioner, timing chain (108339)
- 1x Febi Guide, timing chain (181876)
- 1x Febi Guide, timing chain (177613)
- 1x Febi Guide, timing chain (108342)
- 1x Febi Guide, timing chain (108343)
£89.89
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Aluminium |
| Additional Information 2 | without ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 181748 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.89
Important compatibility info
| Outer diameter | 38 mm |
| Operating Mode | Electronic |
| Opening Temperature | 105 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.90
Important compatibility info
| Surface | Coated |
| Centering Diameter | 70 mm |
| Bolt Hole Circle Diameter | 115 mm |
| Minimum thickness | 20 mm |
| Brake Disc Thickness | 23 mm |
| Thickness | 45 mm |
| Outer diameter | 315 mm |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | perforated/vented |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.90
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 27 |
| External Teeth, Diff.Side | 37 |
| Number of Teeth, ABS ring | 48 |
| Min. Length | 954 mm |
| ABS Ring Diameter | 99 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Transmission-side joint diameter | 88.8 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.91
Important compatibility info
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 900 mm |
| Inner length 2 | 873 mm |
| Outer length 1 | 1168 mm |
| Outer length 2 | 1166 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.91
Important compatibility info
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Additional Information 2 | with tensioner element |
| Number of Ribs | 8 |
| Length | 880 mm |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (29037)
- 1x Febi Belt Tensioner, v-ribbed belt (22852)
£89.93
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 500 mm |
| Min. Length | 350 mm |
| Pipe Diameter | 51 mm. 45 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.93
Important compatibility info
| Min. Length | 230 mm |
| Pipe Diameter | 40 mm |
| Function | Shock Absorber, driver cab suspension |
| Placement on Vehicle | Left Front, Right Front |
| Mounting points diameter | 12 mm. 18 mm |
| Max. Length | 264 mm |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Piston conrod diameter | 12 mm |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.97
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Thread Size | M27x1,5 |
| Bolt Hole Circle Diameter | 86 mm |
| Bore Diameter | 10.5 mm |
| External Teeth, Wheel Side | 30 |
| Number of mounting bores | 6 |
| Min. Length | 652 mm |
| Wheel Sided Joint Diameter | 90 mm |
| Transmission-side joint diameter | 100 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.97
Important compatibility info
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 345 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Thickness | 52.1 mm |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.98
Important compatibility info
| External Teeth, Diff.Side | 28 |
| Placement on Vehicle | Front Axle Left |
| Type | Drive Shaft |
| Min. Length | 592 mm |
| Transmission-side joint diameter | 86 mm |
| Wheel Sided Joint Diameter | 92.2 mm |
| Function | Drive Shaft |
| Thread Size | M10x1,5 |
| Additional Information 2 | with screw |
| External Teeth, Wheel Side | 40 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.98
Important compatibility info
| Additional Information | with piston |
| Outer diameter | 286 mm. 259 mm |
| Thickness | 640 mm. 240 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Steel |
| External Thread Size | M22, M12 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.99
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Rated Power | 204 W |
| for OE number | 77 01 205 899 |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.99
Important compatibility info
| Parameter | 6 PK |
| Function | Belt Pulley, crankshaft |
| Outer diameter | 153 mm |
| Inner diameter | 14 mm |
| Number of Ribs | 5 |
| Extra Description | ProKit |
| Additional Information 2 | with screw, with seal ring |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (103826)
- 1x Febi Bolt, crankshaft gear (39116)
- 1x Febi Shaft Seal, oil pump (31144)
£89.99
Important compatibility info
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 26642 |
| Placement on Vehicle | Front Axle Left, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.00
Important compatibility info
| Shock Absorber Type | Gas Pressure |
| Bore Diameter | 16 mm |
| Min. Length | 382 mm |
| Pipe Diameter | 51 mm |
| Mounting bores distance | 64.5 mm |
| External Thread Size | M14 x 1,5 |
| Function | Shock Absorber |
| Piston conrod diameter | 22 mm |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Shock Absorber Design | Suspension Strut |
| Type | Shock Absorber |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Max. Length | 541 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.02
Important compatibility info
| Length | 171 mm |
| Voltage | 4.4 V |
| External Thread Size | M10 x 1 |
| Glow Plug Type | Metal glow plug |
| Function | Glow Plug |
| Type | Glow Plug |
| Spanner Size | 10 |
| Fitting Depth | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.02
Important compatibility info
| Number of Connectors / Ports | 3 |
| Type | Sensor, engine oil level |
| Function | Sensor, engine oil level |
| Extra Description | febi Plus |
| Additional Information 2 | with seal ring |
| Replaces | 40787 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.03
Important compatibility info
| Function | Air Tank, compressed-air system |
| Material | Steel |
| Outer diameter | 276 mm |
| Internal Thread Size | M22 x 1,5 |
| Capacity | 30 l |
| Operating Pressure | 15.5 bar |
| Length | 584 mm |
| Type | Air Tank, compressed-air system |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.06
Important compatibility info
| Thread Size | M22x1,5 |
| External Teeth, Diff.Side | 34 |
| Transmission-side joint diameter | 79 mm |
| Min. Length | 591 mm |
| External Teeth, Wheel Side | 26 |
| Additional Information 2 | with nut |
| Wheel Sided Joint Diameter | 82.1 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.06
Important compatibility info
| Width of castor bearing surface | 38 mm |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Units / Pulleys | incl. deflection pulley |
| Function | V-Ribbed Belt Set |
| Length | 1512 mm |
| Number of Ribs | 10 |
| Type | V-Ribbed Belt Set |
| Additional Information | with belt tensioner for V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Tensioner, v-ribbed belt (35534)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (30646)
- 1x Febi V-Ribbed Belt (40706)
£90.07
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 325 mm |
| Thickness | 48 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 69 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | internally vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.08
Important compatibility info
| Function | Oil Pump |
| Type | Oil Pump |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.10
Important compatibility info
| Cone Size | 19 mm |
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Right, Lower, Front |
| Material | Aluminium |
| Inner diameter | 14 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 38271 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with hydro mount, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (38393)
- 1x Febi Nut (39976)
£90.11
Important compatibility info
| Placement on Vehicle | Right |
| for OE number | 1K0 199 262 CB |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.12
Important compatibility info
| for OE number | 03L 253 039 G |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.13
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 2.2 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.13
Important compatibility info
| Extra Description | Basic Short Kit |
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 154 |
| Type | Timing Chain Kit |
| Part number of the recommended special tools | 193083 |
| Function | Timing Chain Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (186214)
- 1x Febi Tensioner, timing chain (181992)
- 1x Febi Guide, timing chain (181668)
- 1x Febi Guide, timing chain (181626)
- 1x Febi Guide, timing chain (187690)
£90.14
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 356 mm |
| Thickness | 36.2 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.14
Important compatibility info
| Additional Information | without solenoid valve, with gaskets/seals |
| Number of Wings | 7 |
| Additional Information 2 | switchable water pump |
| Water pump impeller material | Plastic |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.17
Important compatibility info
| Additional Information | with hose |
| Additional Information 2 | with clamps |
| Housing Colour | Black |
| Type | Repair Kit, oil separator (crankcase ventilation) |
| Housing material | Plastic |
| Function | Repair Kit, oil separator (crankcase ventilation) |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Separator, crankcase ventilation (38773)
- 1x Febi Hose, crankcase ventilation (181755)
- 2x Febi Hose Clamp (48348)
£90.17
Important compatibility info
| Type | Oil Cooler, engine oil |
| Core Width | 76 mm |
| Function | Oil Cooler, engine oil |
| Core Length | 149 mm |
| Core Depth | 75 mm |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.17
Important compatibility info
| Type | Mounting, automatic transmission / Mounting, manual transmission |
| Extra Description | febi Plus |
| Placement on Vehicle | outer |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, automatic transmission / Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.18
Important compatibility info
| Voltage | 24 V |
| Number of Connectors / Ports | 5 |
| Additional Information 2 | with bolts/screws, with nut, with cable |
| Type | Wiper Motor |
| Function | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.18
Important compatibility info
| Placement on Vehicle | Front Axle Right, Front |
| Additional Information | with lock nut |
| Material | Steel |
| Additional Information 2 | with bearing, with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 194291 |
| Cone Size | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.18
Important compatibility info
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Left |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.21
Important compatibility info
| Placement on Vehicle | Right Front |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.22
Important compatibility info
| Transmission-side joint diameter | 77 mm |
| Paired article numbers | 183590 |
| External Teeth, Wheel Side | 23 |
| External Teeth, Diff.Side | 26 |
| Min. Length | 624 mm |
| Wheel Sided Joint Diameter | 79 mm |
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Thread Size | M20x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.23
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Lower Right, Front |
| Material | Cast Steel |
| Inner diameter | 12 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 40603 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (36838)
- 1x Febi Screw (37673)
- 1x Febi Nut (34653)
£90.25
Important compatibility info
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M33x1,5 |
| Wheel Sided Joint Diameter | 112 mm |
| Transmission-side joint diameter | 103.5 mm |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 41 |
| Min. Length | 1086 mm |
| External Teeth, Wheel Side | 35 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.28
Important compatibility info
| Outer diameter 1 | 72.4 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Inner diameter | 30 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Outer diameter | 85 mm |
| Width | 48 mm |
| Placement on Vehicle | Rear Axle |
| Outer diameter 2 | 161.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.29
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 183208 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 41 mm |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Vehicle Equipment | for vehicles with electric parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.30
Important compatibility info
| for OE number | 2 252 075 |
| Control Type | Rotary Operation |
| Type | Switch, headlight |
| Function | Switch, headlight |
| Combi Switch Function | with hazard warning light function, with light dimmer function, Headlight Levelling |
| Number of Connectors / Ports | 11 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.32
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 25 |
| External Teeth, Diff.Side | 33 |
| Min. Length | 916 mm |
| Wheel Sided Joint Diameter | 77.4 mm |
| Transmission-side joint diameter | 75 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.32
Important compatibility info
| Type | Shock Absorber |
| Max. Length | 571 mm |
| Piston conrod diameter | 25 mm |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Pipe Diameter | 58 mm |
| External Thread Size | M14 x 1,5 |
| Shock Absorber System | Twin-Tube |
| Function | Shock Absorber |
| Min. Length | 322 mm |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber Mounting Type | Top pin, bottom steering knuckle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.32
Important compatibility info
| Fill quantity | 11.5 l |
| Function | Expansion Tank, coolant |
| Thickness | 147 mm |
| Number of Connectors / Ports | 2 |
| Material | PP (Polypropylene) |
| Width | 174 mm |
| Length | 477 mm |
| Extra Description | ProKit |
| Type | Expansion Tank, coolant |
| Additional Information | with coolant level sensor, with lids |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.34
Important compatibility info
| Placement on Vehicle | Rear |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 13 mm |
| Function | Shock Absorber, driver cab suspension |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 329 mm |
| Min. Length | 253 mm |
| Pipe Diameter | 44 mm. 53 mm |
| External Thread Size | M10 x 1 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.35
Important compatibility info
| Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
| Length | 330 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Cone Size | 36 mm |
| Pipe Diameter | 36 mm |
| Mounting points diameter | 15 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 80 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.35
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023