Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 10.3 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 316 mm |
| Thickness | 56.5 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 58.1 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.87
Important compatibility info
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Number of Connectors / Ports | 4 |
| Type | Mass Air Flow Sensor |
| Weight | 0.03 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.89
Important compatibility info
| Function | Hydraulic Hose, steering |
| Weight | 0.789 kg |
| Type | Hydraulic Hose, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.93
Important compatibility info
| Weight | 0.23 kg |
| Operating Mode | Hydraulic |
| Placement on Vehicle | Upper Left |
| Paired article numbers | 12511 |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.93
Important compatibility info
| Function | Wiper Motor |
| Number of Connectors / Ports | 4 |
| Placement on Vehicle | Rear |
| Voltage | 12 V |
| Weight | 0.9 kg |
| Type | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.93
Important compatibility info
| Additional Information 2 | with bolts/screws |
| Weight | 2.780 kg |
| Parameter | 7PK |
| Width | 26 mm |
| Outer diameter | 168 mm |
| Inner diameter | 59 mm |
| Number of Ribs | 6 |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (31212)
£80.93
Important compatibility info
| for OE number | 03G 115 105 |
| Additional Information 2 | with gear |
| Weight | 0.610 kg |
| Type | Oil Pump |
| Function | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.93
Important compatibility info
| Hole Spacing | 90 mm |
| Function | Brake Master Cylinder |
| Weight | 0.53 kg |
| for OE number | 004 430 75 01 |
| Type | Brake Master Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.93
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 62 mm |
| Outer diameter | 91 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Inner diameter | 33 mm |
| Weight | 5.130 kg |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Outer diameter 1 | 67 mm |
| Outer diameter 2 | 169 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.93
Important compatibility info
| Weight | 0.236 kg |
| Number of Connectors / Ports | 5 |
| Combi Switch Function | with wash function, with indicator function, with high beam function, with wipe interval function |
| Type | Steering Column Switch |
| Function | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.93
Important compatibility info
| Additional Information 2 | with rolling bearing |
| Inner diameter | 30 mm |
| Weight | 0.479 kg |
| Bearing Type | Rolling Bearing |
| Hole Spacing | 138 mm |
| Type | Suspension, propshaft |
| Length | 178 mm |
| Function | Suspension, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.93
Important compatibility info
| Function | EGR Valve |
| Weight | 0.68 kg |
| Type | EGR Valve |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.93
Important compatibility info
| Thickness | 47 mm |
| Brake Disc Thickness | 28 mm |
| Centering Diameter | 64.1 mm |
| Surface | Coated |
| Bolt Hole Circle Diameter | 114.3 mm |
| Minimum thickness | 26 mm |
| Number of mounting bores | 2 |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Weight | 9.0 kg |
| Outer diameter | 320 mm |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.95
Important compatibility info
| Internal Thread Size | M30 x 1,5 |
| External Thread Size | M24 x 1,5 |
| Weight | 9.05 kg |
| Placement on Vehicle | Front Axle |
| Length | 1320 mm |
| Rod/Strut | Push Rod |
| Cone Size | 26 mm |
| Pipe Diameter | 40 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.97
Important compatibility info
| Weight | 3.685 kg |
| Length | 1318 mm |
| Rod/Strut | Push Rod |
| Cone Size | 16 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.97
Important compatibility info
| Function | Clutch Release Bearing |
| Weight | 2.500 kg |
| Type | Clutch Release Bearing |
| Replaces | 105257 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.97
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Weight | 2.366 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Additional Information 2 | without ball joint |
| Material | Steel |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.97
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 22 mm |
| Weight | 5.582 kg |
| Paired article numbers | 181050 |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.97
Important compatibility info
| Weight | 2.708 kg |
| for OE number | 003 250 69 15 |
| Type | Clutch Release Bearing |
| Function | Clutch Release Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.97
Important compatibility info
| Function | Chain Kit, oil pump drive |
| Timing Chain Size | Z53 |
| Type | Chain Kit, oil pump drive |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 52 |
| Additional Information 2 | Requires special tools for mounting |
| Weight | 0.322 kg |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (172276)
- 1x Febi Tensioner, timing chain (179357)
- 1x Febi Rail, oil pump drive chain (178541)
£80.97
Important compatibility info
| Additional Information 2 | with dryer |
| Weight | 1.683 kg |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 353 mm |
| Core Width | 644 mm |
| Core Depth | 12 mm |
| Refrigerant | R 134a |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.97
Important compatibility info
| Weight | 3.8 kg |
| Placement on Vehicle | Left Front |
| Operating Mode | Electric |
| Paired article numbers | 106302 |
| Type | Window Regulator |
| Function | Window Regulator |
| Additional Information | with electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.97
Important compatibility info
| Type | Cable Pull, manual transmission |
| Inner length 1 | 873 mm |
| Weight | 0.832 kg |
| Inner length 2 | 870 mm |
| Function | Cable Pull, manual transmission |
| Outer length 1 | 1100 mm |
| Outer length 2 | 1167 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.97
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 1.1 kW |
| Weight | 4.0 kg |
| for OE number | 02M 911 023 G |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.97
Important compatibility info
| Weight | 0.12 kg |
| Length | 178 mm |
| Material | Plastic |
| Number of Connectors / Ports | 2 |
| Function | Slave Cylinder, seat adjustment |
| Type | Slave Cylinder, seat adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.97
Important compatibility info
| Weight | 4.1 kg |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Paired article numbers | 179736 |
| Placement on Vehicle | Front |
| Max. Length | 372 mm |
| Pipe Diameter | 45 mm |
| Mounting points diameter | 14 mm. 35 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.97
Important compatibility info
| Mounting points diameter | 6.85 mm |
| Function | Coolant Control Valve |
| Inner diameter | 10 mm. 5.75 mm |
| Operating Mode | Mechanical |
| Weight | 0.14 kg |
| Type | Coolant Control Valve |
| for OE number | 1 868 457 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.97
Important compatibility info
| Operating Mode | Pneumatic |
| Placement on Vehicle | Front |
| Weight | 2.77 kg |
| Function | Shock Absorber, driver cab suspension |
| Min. Length | 254 mm |
| External Thread Size | M12 x 1,5 |
| Max. Length | 353 mm |
| Mounting points diameter | 14 mm. 25 mm |
| Type | Shock Absorber, driver cab suspension |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Piston conrod diameter | 15 mm |
| Replaces | 19560 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.97
Important compatibility info
| Weight | 1.27 kg |
| Chain Type | Duplex, Closed chain |
| Number of Chain Links | 168 |
| Timing Chain Size | D67ZN |
| Function | Timing Chain |
| Additional Information 2 | Requires special tools for mounting |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.97
Important compatibility info
| Number of Connectors / Ports | 9 |
| Weight | 0.164 kg |
| Type | Control Unit, glow time |
| Function | Control Unit, glow time |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.97
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023