Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Thread Size | M27x1,5 |
| Bolt Hole Circle Diameter | 94 mm |
| Bore Diameter | 10.5 mm |
| External Teeth, Wheel Side | 30 |
| Weight | 7.630 kg |
| Number of mounting bores | 6 |
| Min. Length | 651 mm |
| Wheel Sided Joint Diameter | 94 mm |
| Transmission-side joint diameter | 108 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Placement on Vehicle | Front Axle |
| External Thread Size | M18 x 1,5 |
| Length | 1620 mm |
| Rod/Strut | Push Rod |
| Cone Size | 22 mm |
| Pipe Diameter | 36 mm |
| Internal Thread Size | M28 x 1,5 RHT, M28 x 1,5 LHT |
| Weight | 7.800 kg |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Internal Thread Size | M30 x 1,5 |
| External Thread Size | M24 x 1,5 |
| Weight | 7.4 kg |
| Placement on Vehicle | Front Axle Left |
| Length | 635 mm |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 48 mm |
| Type | Tie Rod |
| Function | Tie Rod |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Additional Information | with gasket/seal |
| Weight | 1.770 kg |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Rated Power | 1.7 kW |
| Weight | 3.76 kg |
| Number of Teeth | 10 |
| Type | Starter |
| Voltage | 12 V |
| Function | Starter |
| for OE number | 02E 911 023 HX |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Weight | 0.84 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 144 |
| Function | Timing Chain Kit |
| Timing Chain Size | G53HR |
| for OE number | 11 31 8 618 317 S3 |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (28719)
- 1x Febi Guide, timing chain (30448)
- 1x Febi Guide, timing chain (30453)
- 1x Febi Guide, timing chain (30446)
- 1x Febi Tensioner, timing chain (47638)
£82.95
Important compatibility info
| Additional Information 2 | with seal ring |
| Number of Connectors / Ports | 4 |
| Weight | 0.658 kg |
| for OE number | 4104 2851 |
| Type | Sender Unit, fuel tank |
| Function | Sender Unit, fuel tank |
| Screw length below head | 625 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| Mounting points diameter | 50 mm. 14 mm |
| Piston conrod diameter | 13 mm |
| Min. Length | 286 mm |
| Pipe Diameter | 48 mm |
| Operating Mode | Mechanical |
| Placement on Vehicle | Front |
| Max. Length | 346 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Weight | 1.5 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Additional Information 2 | with bearing, with ball joint |
| Steering arm type | Control Arm |
| Material | Cast Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 41067 |
| Weight | 5.0 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right, Lower |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Additional Information 2 | with seal ring |
| Number of Connectors / Ports | 2 |
| Weight | 0.80 kg |
| for OE number | 81.27203.6033 |
| Type | Sender Unit, fuel tank |
| Function | Sender Unit, fuel tank |
| Screw length below head | 613 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Additional Information 2 | with seal ring |
| Number of Connectors / Ports | 1 |
| Weight | 0.66 kg |
| for OE number | 74 82 158 843 |
| Type | Sender Unit, fuel tank |
| Function | Sender Unit, fuel tank |
| Screw length below head | 690 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Weight | 8.265 kg |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Length | 863 mm |
| Width | 42 mm |
| Thickness | 42 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Placement on Vehicle | Front Axle |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Weight | 3.85 kg |
| Bolt Hole Circle Diameter | 116 mm |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Width | 90 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bearing Type | Angular Ball Bearing |
| Inner diameter | 30 mm |
| Additional Information 2 | with ABS sensor ring |
| Outer diameter | 148 mm |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Internal Thread Size | M10 x 1 |
| Placement on Vehicle | Rear |
| Weight | 2.9 kg |
| Pressure | 400 bar |
| Type | Door Lock, driver cab |
| Function | Door Lock, driver cab |
| Additional Information 2 | without switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Weight | 0.303 kg |
| Function | Gasket Set, automatic transmission |
| Extra Description | febi Plus |
| Type | Gasket Set, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Bottom eye, Top pin |
| Max. Length | 384 mm |
| Min. Length | 272 mm |
| Pipe Diameter | 34 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber, driver cab suspension |
| Weight | 2.13 kg |
| External Thread Size | M12 x 1,75 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Left |
| Additional Information | with rubber-metal mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 179987 |
| Weight | 4.55 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Length | 550 mm |
| Width | 250 mm |
| Material | Metal |
| Thickness | 1.4 mm |
| Function | Gasket, cylinder head |
| Weight | 0.421 kg |
| Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Weight | 1.270 kg |
| Width of castor bearing surface | 30 mm |
| Outer diameter | 65 mm |
| Operating Mode | Mechanical |
| Type | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Rod/Strut | Push Rod |
| Length | 1490 mm |
| Additional Information 2 | with crown nut |
| Pipe Diameter | 38 mm |
| Cone Size | 26 mm |
| Extra Description | ProKit |
| Function | Tie Rod |
| Type | Tie Rod |
| Replaces | 24002 |
| Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
| External Thread Size | M20 x 1,5 |
| Outer diameter | 38 mm |
| Placement on Vehicle | Front Axle |
| Weight | 9.660 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Piston conrod diameter | 10 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Weight | 0.3 kg |
| Length | 316 mm |
| Eject Force | 2010 N |
| Housing Diameter | 35 mm |
| Stroke | 71 mm |
| Mounting points diameter | 19 mm |
| Housing length | 195 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Weight | 3.513 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 57 mm |
| Outer diameter | 96 mm |
| Inner diameter | 35 mm |
| Bearing Type | Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (172392)
- 1x Febi Axle Bolt, drive shaft (104750)
£82.95
Important compatibility info
| Weight | 0.717 kg |
| Function | Cylinder Head Gasket Set, air compressor |
| Type | Cylinder Head Gasket Set, air compressor |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Weight | 0.885 kg |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Additional Information 2 | with seal ring |
| Weight | 0.69 kg |
| for OE number | 20746637 |
| Type | Sender Unit, fuel tank |
| Function | Sender Unit, fuel tank |
| Screw length below head | 615 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Material | Cast Aluminium |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Weight | 0.866 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Cone Size | 30 mm |
| Pipe Diameter | 36 mm |
| Function | Centre Rod Assembly |
| Weight | 5.45 kg |
| Placement on Vehicle | Front Axle |
| Length | 860 mm |
| Width | 62 mm |
| Thickness | 115 mm |
| Rod/Strut | Push Rod |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Operating Mode | Hydraulic |
| Weight | 0.27 kg |
| Placement on Vehicle | Upper Right |
| Paired article numbers | 12510 |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Internal Thread Size | M30 x 1,5 RHT |
| Weight | 9.005 kg |
| Placement on Vehicle | Front Axle |
| Length | 966 mm |
| Outer diameter | 50 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Function | Centre Rod Assembly |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| External Thread Size | M24 x 1,5 |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Weight | 6.510 kg |
| Function | Centre Rod Assembly |
| Outer diameter | 40 mm |
| Cone Size | 26.2 mm |
| Driver Position | for right-hand drive vehicles |
| Rod/Strut | Push Rod |
| Length | 730 mm |
| Placement on Vehicle | Front Axle |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M20 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Placement on Vehicle | Front Axle |
| Length | 776 mm. 726 mm |
| Rod/Strut | Push Rod |
| Weight | 6.6 kg |
| Cone Size | 28.6 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Transmission-side joint diameter | 77 mm |
| Paired article numbers | 183590 |
| External Teeth, Wheel Side | 23 |
| Weight | 5.242 kg |
| External Teeth, Diff.Side | 26 |
| Min. Length | 624 mm |
| Wheel Sided Joint Diameter | 79 mm |
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Thread Size | M20x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Additional Information 2 | with seal ring |
| Number of Connectors / Ports | 3 |
| Weight | 0.72 kg |
| for OE number | 74 82 158 841 |
| Type | Sender Unit, fuel tank |
| Function | Sender Unit, fuel tank |
| Screw length below head | 690 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Length | 290 mm |
| Outer diameter | 53 mm |
| Additional Information 2 | with pressure switch (high pressure side), with pressure switch (low pressure side), with pressure switch |
| Number of Connectors / Ports | 3 |
| Weight | 0.8 kg |
| Number of mounting bores | 2 |
| Mounting points diameter | 10 mm |
| Type | Dryer, air conditioning |
| Function | Dryer, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Function | Ignition Coil |
| Number of Connectors / Ports | 6 |
| Ignition Coil | 4 Spark |
| Weight | 0.80 kg |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Weight | 5.3 kg |
| Placement on Vehicle | Front Axle |
| Length | 380 mm |
| Thickness | 55.43 mm |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Additional Information | with rubber-metal mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Weight | 4.600 kg |
| Width | 20 mm |
| Outer diameter | 490 mm |
| Inner diameter | 440 mm |
| Number of Teeth | 161 |
| Type | Ring Gear, flywheel |
| Function | Ring Gear, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Transmission-side joint diameter | 92.5 mm |
| External Teeth, Diff.Side | 31 |
| Min. Length | 542 mm |
| Wheel Sided Joint Diameter | 92.2 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
| External Teeth, Wheel Side | 40 |
| Weight | 7.078 kg |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Operating Mode | Automatic |
| Width of castor bearing surface | 40 mm |
| Weight | 1.902 kg |
| for OE number | 906 200 43 70 |
| Outer diameter | 75 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Additional Information 2 | with ball joint |
| Placement on Vehicle | Front Axle Right |
| Material | Aluminium |
| Steering arm type | Triangular Control Arm (CV) |
| Paired article numbers | 179106 |
| Weight | 4.850 kg |
| Cone Size | 24 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.96
Important compatibility info
| Weight | 2.14 kg |
| Placement on Vehicle | Rear Axle |
| Width | 38 mm |
| Outer diameter | 203 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Function | Brake Shoe Set |
| Piston Diameter | 20.6 mm |
| Type | Brake Shoe Set |
| Additional Information | with accessories, with wheel brake cylinder, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.96
Important compatibility info
| Weight | 2.245 kg |
| Placement on Vehicle | Rear Axle |
| Width | 38 mm |
| Outer diameter | 203.2 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Function | Brake Shoe Set |
| Piston Diameter | 20.6 mm |
| Type | Brake Shoe Set |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.96
Important compatibility info
| Length | 760 mm |
| Width | 56 mm |
| Thickness | 38 mm |
| Weight | 0.06 kg |
| Function | Switch, steering column adjustment |
| Type | Switch, steering column adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.99
Important compatibility info
| Weight | 0.065 kg |
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| Housing Type | without housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.99
Important compatibility info
| Function | Brake Disc |
| Centering Diameter | 56 mm |
| Surface | Oiled |
| Minimum thickness | 7 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Thickness | 69.2 mm |
| Brake Disc Thickness | 9 mm |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 248 mm |
| Rim Hole Number | 4 -Hole |
| Weight | 5.56 kg |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
| Additional Information 2 | with ABS sensor ring, with grease cap |
| Hub external diameter | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.00
Important compatibility info
| Weight | 1.7 kg |
| Number of Wings | 9 |
| Function | Water Pump, engine cooling |
| Seal Material | Metal |
| Water pump impeller material | Metal |
| Material | Cast Aluminium |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| Vehicle Equipment | for vehicles with start-stop function |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.00
Important compatibility info
| Weight | 10.38 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 340 mm |
| Thickness | 34.3 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 71.1 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.02
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 2.002 kg |
| Placement on Vehicle | Front Axle Left, Front |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 29254 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 16 mm |
| Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (23359)
£83.03
Important compatibility info
| Placement on Vehicle | Front Axle Right, Front |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 29253 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 2.002 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
| External Thread Size | M14 x 1,5 |
| Cone Size | 27 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (23359)
£83.03
Important compatibility info
| Material | Cast Aluminium |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Seal Material | Metal |
| Weight | 0.901 kg |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.07
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023