Proud to be a UK-based company
Contact us
Important compatibility info
| Refrigerant | R 134a |
| Type | Condenser, air conditioning |
| Core Length | 451 mm |
| Function | Condenser, air conditioning |
| Core Depth | 16 mm |
| Additional Information 2 | with dryer |
| Core Width | 560 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.96
Important compatibility info
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| Housing Type | without housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.99
Important compatibility info
| Function | Brake Disc |
| Centering Diameter | 56 mm |
| Surface | Oiled |
| Minimum thickness | 7 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Thickness | 69.2 mm |
| Brake Disc Thickness | 9 mm |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 248 mm |
| Rim Hole Number | 4 -Hole |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
| Additional Information 2 | with ABS sensor ring, with grease cap |
| Hub external diameter | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.00
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Wings | 9 |
| Function | Water Pump, engine cooling |
| Seal Material | Metal |
| Water pump impeller material | Metal |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| Vehicle Equipment | for vehicles with start-stop function |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.00
Important compatibility info
| Width | 46 mm |
| Outer diameter | 59 mm |
| Inner diameter | 15 mm |
| Number of Ribs | 6 |
| Type | Alternator Freewheel Clutch |
| Function | Alternator Freewheel Clutch |
| Additional Information 2 | with lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.00
Important compatibility info
| Max. Length | 326 mm |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
| Mounting points diameter | 12 mm |
| Min. Length | 171 mm |
| Pipe Diameter | 41 mm. 101 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Operating Mode | Mechanical |
| Placement on Vehicle | Rear |
| Paired article numbers | 178446 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.01
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 340 mm |
| Thickness | 34.3 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 71.1 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.02
Important compatibility info
| Type | Cable Pull, manual transmission |
| Inner length 2 | 780 mm |
| Inner length 1 | 802 mm |
| Function | Cable Pull, manual transmission |
| Outer length 1 | 1121 mm |
| Outer length 2 | 1102 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.02
Important compatibility info
| Placement on Vehicle | Left |
| Number of Connectors / Ports | 2 |
| Paired article numbers | 176645 |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.06
Important compatibility info
| Length | 248 mm |
| Outer diameter | 165 mm |
| Function | Suspension Spring |
| Number of Coils | 6 |
| Placement on Vehicle | Rear Axle |
| Wire Diameter | 22 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.07
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Seal Material | Metal |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.07
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 118 |
| Timing Chain Size | G53HR |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (25371)
- 1x Febi Tensioner, timing chain (49496)
- 1x Febi Guide, timing chain (49504)
- 1x Febi Guide, timing chain (49503)
- 1x Febi Guide, timing chain (49499)
- 1x Febi Seal Ring (05552)
£83.07
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 335 mm |
| Thickness | 45.1 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.11
Important compatibility info
| Length | 760 mm |
| Width | 56 mm |
| Thickness | 38 mm |
| Function | Switch, steering column adjustment |
| Type | Switch, steering column adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.15
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 61 mm |
| Additional Information | with nuts |
| Outer diameter | 93 mm |
| Additional Information 2 | with integrated ABS sensor |
| Inner diameter | 37 mm |
| Outer diameter 1 | 68 mm |
| Outer diameter 2 | 140 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.15
Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 150 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| for OE number | 03F 109 158 G S2 |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary. The special tool must be used for installation / removal.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (45052)
- 1x Febi Tensioner, timing chain (46274)
- 1x Febi Guide, timing chain (102139)
- 1x Febi Guide, timing chain (102138)
- 1x Febi Gear/Sprocket, camshaft (107796)
- 1x Febi Bolt, camshaft gear (46364)
- 1x Febi Pulley Bolt (32025)
- 1x Febi Shaft Seal, crankshaft (38238)
£83.17
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 365 mm |
| Thickness | 48.6 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 22 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.17
Important compatibility info
| Number of Chain Links | 130 |
| Chain Type | Silent Chain, Closed chain |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (40390)
- 1x Febi Tensioner, timing chain (100671)
- 1x Febi Guide, timing chain (36085)
- 1x Febi Guide, timing chain (36224)
- 1x Febi Sprocket, crankshaft (173749)
- 1x Febi Shaft Seal, crankshaft (32471)
- 4x Febi Sliding Rail Bolts, timing chain (101126)
- 3x Febi Screw (102039)
- 1x Febi Pulley Bolt (32025)
- 2x Febi Bolt, camshaft gear (32183)
£83.17
Important compatibility info
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Housing material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.18
Important compatibility info
| Length | 1675 mm |
| Number of Ribs | 7 |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Polyester |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (180079)
- 1x Febi Belt Tensioner, v-ribbed belt (36831)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (36826)
£83.18
Important compatibility info
| Function | Repair Kit, suspension strut support mount |
| Outer diameter | 177 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
| Inner diameter | 14 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.19
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 300 mm |
| Thickness | 55.7 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 19.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Machining | High-carbon |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.21
Important compatibility info
| External Thread Size | M16 x 1,5, M10 x 1,5 |
| Additional Information | with piston |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 225 mm. 259 mm |
| Thickness | 268 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.23
Important compatibility info
| for OE number | 4M0 199 372 FM |
| Placement on Vehicle | Right |
| Type | Mounting, engine |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Function | Mounting, engine |
| Replaces | 172199 |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.23
Important compatibility info
| Rotor Style | perforated/vented |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Outer diameter | 320 mm |
| Thickness | 51.1 mm |
| Brake Disc Thickness | 30 mm |
| Placement on Vehicle | Front Axle |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.24
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 210.4 mm |
| Width | 92.4 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 28.7 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.26
Important compatibility info
| Operating Mode | Vacuum-controlled |
| Function | Water Pump, engine cooling |
| Seal Material | Rubber |
| Water pump impeller material | Plastic |
| Number of Wings | 7 |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| Housing material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.27
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 69 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Minimum thickness | 26.4 mm |
| Brake Disc Thickness | 28 mm |
| Thickness | 49.1 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 321 mm |
| Type | Brake Disc Rotor |
| for OE number | 51712-2B700 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.28
Important compatibility info
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Water pump impeller material | Plastic |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Belts | with trapezoidal tooth profile |
| Width | 25.4 mm |
| Number of Teeth | 141 |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Units / Pulleys | incl. tensioner pulley, incl. deflection pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (39203)
- 1x Febi Water Pump, engine cooling (24528)
£83.28
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | Left Front |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.30
Important compatibility info
| Additional Information | with gasket/seal, with fastening/mounting material |
| Type | Heat Exchanger, interior heating |
| Function | Heat Exchanger, interior heating |
| Core Depth | 32 mm |
| Core Length | 164 mm |
| Core Width | 210 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.31
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Tilt Pump, driver cab |
| Operating Mode | Manual |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.35
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Function | Chain Kit, oil pump drive |
| Timing Chain Size | G53H, G53HRF |
| Number of Chain Links | 80 |
| Chain Type | Simplex, Closed chain |
| Type | Chain Kit, oil pump drive |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (25388)
- 1x Febi Chain Tensioner, oil pump drive (32265)
£83.37
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.37
Important compatibility info
| Rim Hole Number | 6 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 338 mm |
| Thickness | 68.3 mm |
| Brake Disc Thickness | 32 mm |
| Minimum thickness | 29 mm |
| Bolt Hole Circle Diameter | 139.7 mm |
| Centering Diameter | 108 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.40
Important compatibility info
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Placement on Vehicle | Front Axle |
| Length | 980 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.41
Important compatibility info
| Additional Information 2 | with seal ring |
| Number of Connectors / Ports | 2 |
| for OE number | 81.27203.6019 |
| Type | Sender Unit, fuel tank |
| Function | Sender Unit, fuel tank |
| Screw length below head | 558 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.42
Important compatibility info
| Additional Information 2 | with seal ring |
| Number of Connectors / Ports | 2 |
| for OE number | 2 568 893 |
| Type | Sender Unit, fuel tank |
| Function | Sender Unit, fuel tank |
| Screw length below head | 479 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.42
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 27 mm |
| Type | Brake Pad Set, disc brake |
| Placement on Vehicle | Front Axle |
| Length | 204.5 mm |
| Width | 106 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.44
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Rated Power | 300 W |
| Number of Wings | 8 |
| Function | Fan, engine cooling |
| Type | Fan, engine cooling |
| Additional Information 2 | with radiator fan shroud |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.44
Important compatibility info
| Placement on Vehicle | Front |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting points diameter | 12 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| Operating Mode | Mechanical |
| Max. Length | 379 mm |
| Min. Length | 282 mm |
| Pipe Diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.44
Important compatibility info
| Function | Cylinder Head Gasket Set, air compressor |
| Type | Cylinder Head Gasket Set, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.44
Important compatibility info
| Transmission Type | 5-Speed Manual Transmission |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Transmission ID | BE4R |
| Inner length 1 | 651 mm |
| Inner length 2 | 661 mm |
| Outer length 1 | 911 mm |
| Outer length 2 | 857 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.45
Important compatibility info
| Width of castor bearing surface | 23 mm |
| Outer diameter | 70 mm |
| Material | Metal |
| Function | Belt Tensioner, v-ribbed belt |
| Type | Belt Tensioner, v-ribbed belt |
| Operating Mode | Automatic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.49
Important compatibility info
| External Thread Size | M16 x 1,5, M24 x 1,5 |
| Rolling piston material | Steel |
| Outer diameter | 155 mm. 190 mm |
| Thickness | 280 mm. 155 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Additional Information | with piston |
| Port / Connector type | Voss Stecksystem 232 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.53
Important compatibility info
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 179988 |
| Type | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Placement on Vehicle | Lower, Front Axle Right |
| Additional Information | with rubber-metal mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.53
Important compatibility info
| Type | Bushing, axle beam |
| Function | Bushing, axle beam |
| Placement on Vehicle | Left, Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.54
Important compatibility info
| Rotor Style | Externally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 323 mm |
| Thickness | 59.5 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.55
Important compatibility info
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Number of Connectors / Ports | 4 |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.57
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Lower Right |
| Material | Rubber/Metal |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.59
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023