Important compatibility info
Number of Teeth | 139 |
Function | Timing Belt Kit |
Width | 25.4 mm |
Weight | 0.62 kg |
Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (39100)
- 1x Febi Tensioner Pulley, timing belt (39101)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (37275)
Important compatibility info
Bolt Hole Circle Diameter | 120 mm |
Extra Description | Powerline |
Function | Joint, propshaft |
Type | Joint, propshaft |
Weight | 1.114 kg |
Thickness | 36 mm |
Outer diameter | 160 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear, both sides |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Weight | 6.8 kg |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.31 kg |
Function | Water Pump & Timing Belt Kit |
Type | Water Pump & Timing Belt Kit |
Number of Teeth | 58. 130 |
for OE number | 036 109 119 AG S3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (21772)
- 1x Febi Water Pump, engine cooling (18894)
Important compatibility info
Voltage | 12 V |
Number of Teeth | 9 |
Rated Power | 0.8 kW |
Weight | 2.83 kg |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 73 mm |
Number of Ribs | 6 |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Type | Belt Tensioner, v-ribbed belt |
Weight | 0.54 kg |
Width of castor bearing surface | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Timing Chain Kit |
Number of Chain Links | 106 |
Chain Type | Duplex, Closed chain |
Weight | 1.215 kg |
Type | Timing Chain Kit |
for OE number | 102 050 10 11 S2 |
Timing Chain Size | D67ZN |
Extra Description | Basic Short Kit |
Additional Information | with slide rails, with chain tensioner |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (17655)
- 1x Febi Tensioner, timing chain (01050)
- 1x Febi Guide, timing chain (10331)
- 1x Febi Guide, timing chain (17072)
- 1x Febi Guide, timing chain (17073)
Important compatibility info
Number of Connectors / Ports | 5 |
Resistor Type | Hot-wire Sensor |
Function | Mass Air Flow Sensor |
Weight | 0.189 kg |
Housing Type | with housing |
Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.222 kg |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Inner length 1 | 1573 mm |
Inner length 2 | 1252 mm |
Outer length 1 | 1880 mm |
Outer length 2 | 1604 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1125 mm |
Number of Ribs | 7 |
Weight | 0.874 kg |
Type | V-Ribbed Belt Set |
Function | V-Ribbed Belt Set |
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (38434)
- 1x Febi Belt Tensioner, v-ribbed belt (27445)
Important compatibility info
Weight | 0.21 kg |
Number of Connectors / Ports | 5 |
Function | Control Unit, air conditioning |
Extra Description | febi Plus |
Type | Control Unit, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right, Front Axle Left |
Bolt Hole Circle Diameter | 104 mm |
Bore Diameter | 11 mm |
External Teeth, Wheel Side | 42 |
Weight | 6.190 kg |
Number of mounting bores | 6 |
Min. Length | 462 mm |
Wheel Sided Joint Diameter | 89 mm |
Transmission-side joint diameter | 123 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Thread Size | M16x1,5 |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Starter |
Weight | 4.0 kg |
Type | Starter |
Rated Power | 2.0 kW |
Number of Teeth | 10 |
Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 193433 |
Weight | 5.2 kg |
Placement on Vehicle | Front Axle Right |
Width | 65 mm |
Outer diameter | 100 mm |
Inner diameter | 29 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size | 30 mm |
Pipe Diameter | 36 mm |
Function | Centre Rod Assembly |
External Thread Size | M24 x 1,5 |
Placement on Vehicle | Front Axle |
Rod/Strut | Push Rod |
Internal Thread Size | M30 x 1,5 |
Weight | 6.093 kg |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 30198 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 4.224 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.05 kg |
Function | Clutch, radiator fan |
Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.9 kg |
Operating Mode | Electric |
Number of Connectors / Ports | 2 |
Function | EGR Valve |
Type | EGR Valve |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.429 kg |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 406 mm |
Min. Length | 360 mm |
Mounting points diameter | 14 mm |
Operating Mode | Pneumatic |
Piston conrod diameter | 14 mm |
Placement on Vehicle | Rear |
Function | Shock Absorber, driver cab suspension |
Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 30199 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 4.224 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023