Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 2.392 kg |
| Function | Release Fork, clutch |
| Type | Release Fork, clutch |
| for OE number | 1956 924 |
| Additional Information | with bush, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Weight | 1.94 kg |
| Additional Information 2 | with bolts/screws, with washers |
| Material | Rubber/Metal |
| Bolt Hole Circle Diameter | 110 mm |
| Function | Joint, propshaft |
| Number of Holes | 6 |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (19795)
- 1x Febi Assembly Kit, propshaft joint (43435)
£81.96
Important compatibility info
| Paired article numbers | 183086 |
| Placement on Vehicle | Front Axle Left |
| Transmission-side joint diameter | 89 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Additional Information | with Split Pin |
| Min. Length | 613 mm |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 29 |
| Weight | 7.860 kg |
| External Teeth, Wheel Side | 29 |
| Type | Drive Shaft |
| Additional Information 2 | with nut |
| Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Weight | 4.574 kg |
| Bearing Type | Angular Ball Bearing |
| Inner diameter | 34 mm |
| Placement on Vehicle | Front Axle |
| Width | 92 mm |
| Additional Information | with fastening/mounting material |
| Outer diameter | 102 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Function | Shock Absorber, driver cab suspension |
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 360 mm |
| Min. Length | 281 mm |
| Pipe Diameter | 45 mm. 62 mm |
| Mounting points diameter | 14 mm. 35 mm |
| Piston conrod diameter | 18 mm |
| Weight | 3.75 kg |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Function | Parts Set, maintenance service |
| Type | Parts Set, maintenance service |
| Weight | 5.573 kg |
| Material | FPM (fluoride rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Fuel filter (31431)
- 1x Febi Oil Filter (27797)
- 1x Febi Gasket, centrifugal cleaner flange (35616)
- 1x Febi Seal Ring, oil drain plug (35640)
- 2x Febi Seal, oil filter housing (35618)
- 2x Febi Oil Filter, manual transmission (38975)
- 1x Febi Air Dryer Cartridge, compressed-air system (35304)
- 1x Febi Filter, cabin air (22095)
- 1x Febi Gasket, centrifugal cleaner flange (35622)
£81.96
Important compatibility info
| Pipe Diameter | 40 mm |
| Rod/Strut | Push Rod |
| Length | 850 mm |
| Function | Centre Rod Assembly |
| Cone Size | 26 mm |
| Weight | 7.2 kg |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Function | Wheel Bearing Kit |
| Outer diameter | 65 mm |
| Inner diameter | 35 mm |
| Weight | 0.560 kg |
| Placement on Vehicle | Rear Axle |
| Width | 21 mm |
| Type | Wheel Bearing Kit |
| Bearing Type | Tapered Roller Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (175597)
£81.96
Important compatibility info
| Additional Information | with slide rails, with chain tensioner |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 138 |
| Weight | 0.95 kg |
| Function | Timing Chain Kit |
| Replaces | 38196 |
| Type | Timing Chain Kit |
| Timing Chain Size | G53HR |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (29867)
- 1x Febi Tensioner, timing chain (21275)
- 1x Febi Guide, timing chain (29534)
- 1x Febi Guide, timing chain (29535)
£81.96
Important compatibility info
| Type | Cylinder Head, air compressor |
| Function | Cylinder Head, air compressor |
| Weight | 1.2 kg |
| Additional Information 2 | with bolts/screws, with spacer plate |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023